Cisco Nexus 2000 Series NX-OS Fabric Extender Configuration Guide for Cisco Nexus 9000 Series Switches, Release 9.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: February 18, 2019

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 2000 Series NX-OS Fabric Extender Configuration Guide for Cisco Nexus 9000 Series Switches.

New and Changed Information

Table 1. New and Changed Features for Cisco NX-OS Release 9.2(x)
Feature	Description	Changed in Release	Where Documented
	Changed the document title from 9.x to 9.2(x).		Title page
IEEE 802.1X port-based authentication	FEX support for IEEE 802.1X port-based authentication on FEX-ST and host interface (HIF) ports.	9.2(3)	Guidelines and Limitations for the Fabric Extender
FEX	Added Straight through FEX support on Cisco Nexus switches (N9K-C93240YC-FX2 , N9K-C9336C-FX2).	9.2(1)	Guidelines and Limitations for the Fabric Extender
FEX	Added Dual-homed FEX support on Cisco Nexus switches (N9K-C93180YC-FX, N9K-C93108TC-FX).	9.2(1)	Guidelines and Limitations for the Fabric Extender

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)