Cisco Nexus 9000 Series NX-OS IP SLAs Configuration Guide, Release 7.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 3, 2015

Chapter: New and Changed Information

New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS IP SLAs Configuration Guide.

New and Changed Information

New and Changed Information

This table summarizes the new and changed features for the *Cisco Nexus 9000 Series NX-OS IP SLAs Configuration Guide* and where they are documented.

Table 1 New and Changed Features
Feature	Description	Changed in Release	Where Documented
IP SLA HTTP Probe	IP SLA HTTP probe is supported for Cisco Nexus 9K Series switches beginning with Cisco NX-OS Release 7.0(3)I6(1).	7.0(3)I6(1).	Configuring an IP SLAs HTTP Operations
IP SLA IPv6 support	IPv6 is supported for Nexus 9300 and 9500 switches beginning with Cisco NX-OS Release 7.0(3)I6(1).	7.0(3)I6(1).	Configuring IP SLAs ICMP Echo Operations
IP SLA support	Initial support	7.0(3)I2(1)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)