The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - C - D - E - F - I - P - R - S - V -Index
A
acl-name 1C
chain ID 1
configuration process 1
configuring a port group 1
Configuring a probe 1
configuring an instance 1
configuring an IP ACL 1
configuring and PACL 1
configuring vrf 1
creating a catena instance 1
creating a chain ID 1
creating a device group 1
creating a list of nodes 1
creating a probe 1
creating a VLAN group 1D
defining vlan-range 1
device group probe 1
displaying catena analytics 1E
enabling or disabling a catena instance 1
end-to-end process 1F
feature Catena 1I
interface 1
ip access-list 1
IP ACL permit or deny 1
IP address list 1P
PACL 1
PACL permit or deny 1
PACL source destination 1
port-group 1R
running-config catena 1S
sequence-number 1
show catena analytics 1
show catena instance-name 1
show catena instance-name brief 1
show running-config catena 1V
vlan-range 1
VRF 1