Cisco Nexus 9000 Series ACI-Mode Switch FPGA/EPLD Upgrade Release Notes, Release 1.3(1g)

Available Languages

Updated:May 9, 2016

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Update History

Contents
Update History
Introduction
Deciding When to Upgrade EPLDs
Switch Requirements
EPLD Upgrades Available for ACI-Mode Releases 1.1(1X) to 1.3(1g)
Related Documentation
Documentation Feedback
Obtaining Documentation and Submitting a Service Request

First Published:
Last Updated:
Text Part Number:

Update History

This document lists the current and past versions of EPLD images and describes how to update them for use with the Cisco Nexus 9000 Series switches.

The following table shows the history of changes for this document.

Date

Description

May 2, 2016

Created the release notes for Release 1.3(1g).

Introduction

The Cisco Nexus 9000 Series ACI-mode switches contain several programmable logical devices (PLDs) that provide hardware functionalities in all modules. Cisco provides electronic programmable logic device (EPLD) image upgrades to enhance hardware functionality or to resolve known issues. PLDs include electronic programmable logic devices (EPLDs), field programmable gate arrays (FPGAs), and complex programmable logic devices (CPLDs), but they do not include ASICs. In this document, the term EPLD is used for FPGA and CPLDs.

The advantage of having EPLDs for some module functions is that when you need to upgrade those functions, you just upgrade their software images instead of replacing their hardware.

Note

EPLD image upgrades for an I/O module disrupt the traffic going through the module because the module must power down briefly during the upgrade. The system performs EPLD upgrades on one module at a time, so at any one time the upgrade disrupts only the traffic going through one module.

Cisco provides the latest EPLD images with each release. Typically, these images are the same as provided in earlier releases but occasionally some of these images are updated. These EPLD image updates are not mandatory unless otherwise specified. The EPLD image upgrades are independent from the Cisco ACI In Service Software Upgrade (ISSU) process, which upgrades the system and kickstart images with no impact on the network environment.

When Cisco makes an EPLD image upgrade available, these release notes announce their availability, and you can download them from http://www.cisco.com.

Deciding When to Upgrade EPLDs

When new EPLD images are available, the upgrades are always recommended if your network environment allows for a maintenance period in which some level of traffic disruption is acceptable. If such a disruption is not acceptable at this time, then you might consider postponing the upgrade until a better time.

Note

The EPLD upgrade operation is a disruptive operation. You should execute this operation only at a programmed maintenance time. The system/kickstart ISSU upgrade is a nondisruptive upgrade.

Note

Do not perform an EPLD upgrade during an ISSU system/kickstart upgrade.

Switch Requirements

The Cisco Nexus 9000 Series switch must be running the Cisco ACI operating system and include the following hardware:

Supervisor modules—one or two, each with at least 200 MB of available bootflash memory (Cisco Nexus 9504, 9508, and 9516 switches)

System controller modules—one or two (Cisco Nexus 9504, 9508, and 9516 switches)

I/O modules (Cisco Nexus 9504, 9508, and 9516 switches)

One to four modules for the Cisco Nexus 9504 switch

One to eight modules for the Cisco Nexus 9508 switch

One to ten modules for the Cisco Nexus 9516 switch

Fabric modules—three to six (Cisco Nexus 9504, 9508, and 9516 switches)

Fan modules

Two for the Cisco Nexus 93120TX switch

Three for the Cisco Nexus 93128TX, 9396PX, and 9396TX switches

Four for the Cisco Nexus 93108TC-EX, 93180YC-EX, 9332PQ, 9372PX, 9372PX-E, 9372TX, and 9372TX-E switches

Fan trays

Three for the Cisco Nexus 9504, 9508, and 9516 modular switches

Power supplies

One or two of the following power supplies for the Cisco Nexus 93108TC-EX, 93180YC-EX, 9332PQ, 9372PX, 9372PX-E, 9372TX, 9372TX-E, 9396PX, and 9396TX switches:

650-W AC power supply with port-side intake airflow and NEBS compliance (NXA-PAC-650W-PI)

650-W AC power supply with port-side exhaust airflow and NEBS compliance (NXA-PAC-650W-PE)

650-W AC power supply with port-side intake airflow (N9K-PAC-650W)

650-W AC power supply with port-side exhaust airflow (N9K-PAC-650W-B)

1200-W HVAC/HVDC power supply with dual direction airflow (N9K-PUV-1200W)

930-W DC power supply with port-side intake airflow (UCSC-PSU-930WDC)

930-W DC power supply with port-side exhaust airflow (UCS-PSU-6332-DC)

One or two 1200-W AC or one or two 930-W DC power supplies for the Cisco Nexus 93120TX, 93128TX, and 9336PQ switches:

1200-W AC power supply with port-side intake airflow and NEBS compliance (NXA-PAC-1200W-PI)

1200-W AC power supply with port-side exhaust airflow and NEBS compliance (NXA-PAC-1200W-PE)

1200-W AC power supply with port-side intake airflow (N9K-PAC-1200W)

1200-W AC power supply with port-side exhaust airflow (N9K-PAC-1200W-B)

1200-W HVAC/HVDC power supply with dual direction airflow (N9K-PUV-1200W)

930-W DC power supply with port-side intake airflow (UCSC-PSU-930WDC)

930-W DC power supply with port-side exhaust airflow (UCS-PSU-6332-DC)

Up to four 3000-W AC power supplies or up to four 3000-W Universal AC/DC power supplies for the Cisco Nexus 9504 switch

Up to eight 3000-W AC power supplies or up to eight 3000-W Universal AC/DC power supplies for the Cisco Nexus 9508 switch

Up to 10 3000-W AC power supplies or up to 10 3000-W Universal AC/DC power supplies for the Cisco Nexus 9516 switch

Uplink module (Cisco Nexus 93128TX, 9396PX, and 9396TX switches only)

M6PQ

M6PQ-E

M12PQ

You must have administrator privileges to work with the Cisco Nexus 9000 Series switch.

EPLD Upgrades Available for ACI-Mode Releases 1.1(1X) to 1.3(1g)

Each EPLD image that you can download from http://www.cisco.com is a bundle of EPLD upgrades. To see the updated EPLD versions for the Cisco Nexus 93xxx ACI-mode switches and the Cisco Nexus 95xx ACI-mode switches, see the following tables.

Note

All updates to an image are shown in boldface.

Table 1 EPLD images for the Cisco Nexus 93xxx ACI-Mode Fixed Switches

Component

EPLD Device

Release 1.1(1X) (6/2015)

Release 1.1(2) (8/2015)

Release 1.2(1i) (12/2015)

Release 1.2(2g) (2/2016)

Release 1.3(1g) (5/2016)

Cisco Nexus 93108TC-EX Switch (N9K-C93108TC-EX)

IOFPGA

N.A.¹

N.A.¹

N.A.¹

N.A.¹

0x3 (0.003)

MIFPGA

N.A.¹

N.A.¹

N.A.¹

N.A.¹

0x4 (0.004)

Cisco Nexus 93120TX Switch (N9K-C93120TX)

IOFPGA

N.A.¹

N.A.¹

0x8 (0.008)

0x8 (0.008)

0x8 (0.008)

MIFPGA

N.A.¹

N.A.¹

0x9 (0.009)

0x9 (0.009)

0x9 (0.009)

Cisco Nexus 93128TX Switch (N9K-C93128TX)

IOFPGA

0x9 (0.009)

0x9 (0.009)

0x10 (0.016)

0x10 (0.016)

0x10 (0.016)

MIFPGA

0x9 (0.009)

0x9 (0.009)

0x9 (0.009)

0x9 (0.009)

0x9 (0.009)

Cisco Nexus 9332PQ Switch (N9K-C9332PQ)

IOFPGA

0x10 (0.016)

0x10 (0.016)

0x11 (0.017)

0x11 (0.017)

0x11 (0.017)

MIFPGA

0x15 (0.021)

0x15 (0.021)

0x15 (0.021)

0x15 (0.021)

0x16 (0.022)

Cisco Nexus 9336PQ Switch (N9K-C9336PQ)

IOFPGA

0x8 (0.008)

0x8 (0.008)

0x9 (0.009)

0x9 (0.009)

0x9 (0.009)

MIFPGA

0x10 (0.016)

0x10 (0.016)

0x10 (0.016)

0x10 (0.016)

0x10 (0.016)

Cisco Nexus 9372PX Switch (N9K-C9372PX)

IOFPGA

0x6 (0.006)

0x6 (0.006)

0x7 (0.007)

0x7 (0.007)

0x7 (0.007)

MIFPGA

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

Cisco Nexus 9372PX-E Switch (N9K-C9372PX-E)

IOFPGA

0x6 (0.006)

0x6 (0.006)

0x7 (0.007)

0x7 (0.007)

0x7 (0.007)

MIFPGA

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

Cisco Nexus 9372TX Switch (N9K-C9372TX)

IOFPGA

0x4 (0.004)

0x4 (0.004)

0x5 (0.005)

0x5 (0.005)

0x5 (0.005)

MIFPGA

0x14 (0.020)

0x14 (0.020)

0x15 (0.021)

0x15 (0.021)

0x15 (0.021)

Cisco Nexus 9372TX-E Switch (N9K-C9372TX)

IOFPGA

N.A.¹

N.A.¹

N.A.¹

0x5 (0.005)

0x5 (0.005)

MIFPGA

N.A.¹

N.A.¹

N.A.¹

0x2 (0.002)

0x2 (0.002)

Cisco Nexus 9396PX Switch (N9K-C9396PX)

IOFPGA

0x14 (0.020)

0x14 (0.020)

0x15 (0.021)

0x15 (0.021)

0x15 (0.021)

MIFPGA

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

0x14 (0.020)

Cisco Nexus 9396TX Switch (N9K-C9396TX)

IOFPGA

0x7 (0.007)

0x7 (0.007)

0x8 (0.008)

0x8 (0.008)

0x8 (0.008)

6-port 40-Gigabit optical uplink module (N9K-M6PQ and N9K-M6PQ-E)

MIFPGA

0x10 (0.016)

0x10 (0.016)

0x10 (0.016)

0x10 (0.016)

0x10 (0.016)

12-port optical uplink module (N9K-M12PQ)

MIFPGA

0x20 (0.032)

0x20 (0.032)

0x20 (0.032)

0x20 (0.032)

0x20 (0.032)

¹ Not available with this release.

Table 2 EPLD images for the Cisco Nexus 95xx ACI-Mode Modular Switches

Component

EPLD Device

Release 1.1(1X) (6/2015)

Release 1.1(2) (8/2015)

Release 1.2(1i) (12/2015)

Release 1.2(2g) (2/2016)

Release 1.3(1g) (5/2016)

Supervisor A (N9K-SUP-A)

IOFPGA

0x22 (0.034)

0x22 (0.034)

0x22 (0.034)

0x27 (0.039)

0x27 (0.039)

Supervisor B (N9K-SUP-B)

IOFPGA

0x22 (0.034)

0x22 (0.034)

0x22 (0.034)

0x27 (0.039)

0x27 (0.039)

System Controller (N9K-SC-A)

IOFPGA

0x19 (0.025)

0x19 (0.025)

0x19 (0.025)

0x19 (0.025)

0x20 (0.032)

32-port 100-Gigabit QSFP28 I/O module (N9K-X9732C-EX)

IOFPGA

N.A.²

N.A.²

N.A.²

N.A.²

0x7 (0.007)

MIFPGA
N.A.²

N.A.²

N.A.²

N.A.²

0x6 (0.006)

36-port 40-Gigabit QSFP+ I/O module (N9K-X9736PQ)

IOFPGA

0x5 (0.019)

0x5 (0.019)

0x5 (0.019)

0x5 (0.019)

0x5 (0.019)

MIFPGA

0x5 (0.019)

0x5 (0.019)

0x5 (0.019)

0x5 (0.019)

0x5 (0.019)

40-Gigabit Fabric module for Cisco Nexus 9504 chassis (N9K-C9504-FM)

IOFPGA

0x18 (0.024)

0x18 (0.024)

0x18 (0.024)

0x19 (0.025)

0x19 (0.025)

100-Gigabit Fabric module for Cisco Nexus 9504 chassis (N9K-C9504-FM-E)

IOFPGA

N.A.²

N.A.²

N.A.²

N.A.²

0x9 (0.009)

40-Gigabit Fabric module for Cisco Nexus 9508 chassis (N9K-C9508-FM)

IOFPGA

0x18 (0.024)

0x18 (0.024)

0x18 (0.024)

0x19 (0.025)

0x19 (0.025)

100-Gigabit Fabric module for Cisco Nexus 9508 chassis (N9K-C9508-FM-E)

IOFPGA

N.A.²

N.A.²

N.A.²

N.A.²

0x5 (0.005)

Fabric module for Cisco Nexus 9516 chassis (N9K-C9516-FM)

IOFPGA

0x12 (0.018)

0x12 (0.018)

0x12 (0.018)

0x13 (0.019)

0x13 (0.019)

² Not available with this release.

Related Documentation

Cisco Application Centric Infrastructure (ACI) Documentation

The ACI documentation is available at the following URL: http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.html.

Cisco Application Centric Infrastructure (ACI) Simulator Documentation

The Cisco ACI Simulator documentation is available at http://www.cisco.com/c/en/us/support/cloud-systems-management/application-centric-infrastructure-simulator/tsd-products-support-series-home.html.

Cisco Nexus 9000 Series Switches Documentation

The Cisco Nexus 9000 Series Switches documentation is available at http://www.cisco.com/c/en/us/support/switches/nexus-9000-series-switches/tsd-products-support-series-home.html.

Cisco Application Virtual Switch Documentation

The Cisco Application Virtual Switch (AVS) documentation is available at http://www.cisco.com/c/en/us/support/switches/application-virtual-switch/tsd-products-support-series-home.html.

Cisco Application Centric Infrastructure (ACI) Integration with OpenStack Documentation

Cisco ACI integration with OpenStack documentation is available at http://www.cisco.com/c/en/us/support/cloud-systems-management/application-policy-infrastructure-controller-apic/tsd-products-support-series-home.html.

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments to apic-docfeedback@cisco.com. We appreciate your feedback.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What's New in Cisco Product Documentation, at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.

Subscribe to What's New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.

Copyright © 2016, Cisco Systems, Inc. All rights reserved.

Date	Description
May 2, 2016	Created the release notes for Release 1.3(1g).

Table 1 EPLD images for the Cisco Nexus 93xxx ACI-Mode Fixed Switches
Component	EPLD Device	Release 1.1(1X) (6/2015)	Release 1.1(2) (8/2015)	Release 1.2(1i) (12/2015)	Release 1.2(2g) (2/2016)	Release 1.3(1g) (5/2016)
Cisco Nexus 93108TC-EX Switch (N9K-C93108TC-EX)	IOFPGA	N.A.¹	N.A.¹	N.A.¹	N.A.¹	0x3 (0.003)
MIFPGA	N.A.¹	N.A.¹	N.A.¹	N.A.¹	0x4 (0.004)
Cisco Nexus 93120TX Switch (N9K-C93120TX)	IOFPGA	N.A.¹	N.A.¹	0x8 (0.008)	0x8 (0.008)	0x8 (0.008)
MIFPGA	N.A.¹	N.A.¹	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)
Cisco Nexus 93128TX Switch (N9K-C93128TX)	IOFPGA	0x9 (0.009)	0x9 (0.009)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)
MIFPGA	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)
Cisco Nexus 9332PQ Switch (N9K-C9332PQ)	IOFPGA	0x10 (0.016)	0x10 (0.016)	0x11 (0.017)	0x11 (0.017)	0x11 (0.017)
MIFPGA	0x15 (0.021)	0x15 (0.021)	0x15 (0.021)	0x15 (0.021)	0x16 (0.022)
Cisco Nexus 9336PQ Switch (N9K-C9336PQ)	IOFPGA	0x8 (0.008)	0x8 (0.008)	0x9 (0.009)	0x9 (0.009)	0x9 (0.009)
MIFPGA	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)
Cisco Nexus 9372PX Switch (N9K-C9372PX)	IOFPGA	0x6 (0.006)	0x6 (0.006)	0x7 (0.007)	0x7 (0.007)	0x7 (0.007)
MIFPGA	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)
Cisco Nexus 9372PX-E Switch (N9K-C9372PX-E)	IOFPGA	0x6 (0.006)	0x6 (0.006)	0x7 (0.007)	0x7 (0.007)	0x7 (0.007)
MIFPGA	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)
Cisco Nexus 9372TX Switch (N9K-C9372TX)	IOFPGA	0x4 (0.004)	0x4 (0.004)	0x5 (0.005)	0x5 (0.005)	0x5 (0.005)
MIFPGA	0x14 (0.020)	0x14 (0.020)	0x15 (0.021)	0x15 (0.021)	0x15 (0.021)
Cisco Nexus 9372TX-E Switch (N9K-C9372TX)	IOFPGA	N.A.¹	N.A.¹	N.A.¹	0x5 (0.005)	0x5 (0.005)
MIFPGA	N.A.¹	N.A.¹	N.A.¹	0x2 (0.002)	0x2 (0.002)
Cisco Nexus 9396PX Switch (N9K-C9396PX)	IOFPGA	0x14 (0.020)	0x14 (0.020)	0x15 (0.021)	0x15 (0.021)	0x15 (0.021)
MIFPGA	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)	0x14 (0.020)
Cisco Nexus 9396TX Switch (N9K-C9396TX)	IOFPGA	0x7 (0.007)	0x7 (0.007)	0x8 (0.008)	0x8 (0.008)	0x8 (0.008)
6-port 40-Gigabit optical uplink module (N9K-M6PQ and N9K-M6PQ-E)	MIFPGA	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)	0x10 (0.016)
12-port optical uplink module (N9K-M12PQ)	MIFPGA	0x20 (0.032)	0x20 (0.032)	0x20 (0.032)	0x20 (0.032)	0x20 (0.032)

Table 2 EPLD images for the Cisco Nexus 95xx ACI-Mode Modular Switches
Component	EPLD Device	Release 1.1(1X) (6/2015)	Release 1.1(2) (8/2015)	Release 1.2(1i) (12/2015)	Release 1.2(2g) (2/2016)	Release 1.3(1g) (5/2016)
Supervisor A (N9K-SUP-A)	IOFPGA	0x22 (0.034)	0x22 (0.034)	0x22 (0.034)	0x27 (0.039)	0x27 (0.039)
Supervisor B (N9K-SUP-B)	IOFPGA	0x22 (0.034)	0x22 (0.034)	0x22 (0.034)	0x27 (0.039)	0x27 (0.039)
System Controller (N9K-SC-A)	IOFPGA	0x19 (0.025)	0x19 (0.025)	0x19 (0.025)	0x19 (0.025)	0x20 (0.032)
32-port 100-Gigabit QSFP28 I/O module (N9K-X9732C-EX)	IOFPGA	N.A.²	N.A.²	N.A.²	N.A.²	0x7 (0.007)
MIFPGA	N.A.²	N.A.²	N.A.²	N.A.²	0x6 (0.006)
36-port 40-Gigabit QSFP+ I/O module (N9K-X9736PQ)	IOFPGA	0x5 (0.019)	0x5 (0.019)	0x5 (0.019)	0x5 (0.019)	0x5 (0.019)
MIFPGA	0x5 (0.019)	0x5 (0.019)	0x5 (0.019)	0x5 (0.019)	0x5 (0.019)
40-Gigabit Fabric module for Cisco Nexus 9504 chassis (N9K-C9504-FM)	IOFPGA	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x19 (0.025)	0x19 (0.025)
100-Gigabit Fabric module for Cisco Nexus 9504 chassis (N9K-C9504-FM-E)	IOFPGA	N.A.²	N.A.²	N.A.²	N.A.²	0x9 (0.009)
40-Gigabit Fabric module for Cisco Nexus 9508 chassis (N9K-C9508-FM)	IOFPGA	0x18 (0.024)	0x18 (0.024)	0x18 (0.024)	0x19 (0.025)	0x19 (0.025)
100-Gigabit Fabric module for Cisco Nexus 9508 chassis (N9K-C9508-FM-E)	IOFPGA	N.A.²	N.A.²	N.A.²	N.A.²	0x5 (0.005)
Fabric module for Cisco Nexus 9516 chassis (N9K-C9516-FM)	IOFPGA	0x12 (0.018)	0x12 (0.018)	0x12 (0.018)	0x13 (0.019)	0x13 (0.019)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)

This Document Applies to These Products

Application Policy Infrastructure Controller (APIC)