Cisco N9348Y12C-SE1 Switch Hardware Installation Guide

Rack Mount Kit NXK-ACC-RMK-1RU

Updated: June 30, 2026

Want to summarize with AI?

Describes the rack mount accessory kit, NXK-ACC-RMK-1RU.

This table lists and illustrates the contents for the 1-RU rack-mount kit, NXK-ACC-RMK-1RU.

Table 1. Rack mount kit contents
Illustration	Description	Quantity
	Rack-mount kit Front brackets (2) Rear brackets (2) Slider rails (2) M4 Phillips pan-head screws (10)	1
	Ground lug kit Two-hole lug (1) M4 x 8-mm Phillips pan-head screws (2)	1
Not applicable	EAC compliance document	1
Not applicable	Hazardous substances list for customers in China	1

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.