Cisco Nexus 9516 ACI-Mode Switch Hardware Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Nexus 9516 ACI-Mode Switch Hardware Installation Guide

Chapter Title

Additional Kits

Results

Updated:
July 2, 2015

Chapter: Additional Kits

Additional Kits

Accessory Kit

The following table lists and illustrates the contents for the accessory kit.

Illustration Description Quantity

Bottom-support rails kit

  • 10-32 x 3/4 in. Phillips screws (20) and nuts (20)

  • 12-24 x 3/4 in. Phillips screws (20)

  • M6 x 19-mm Phillips screws (20)

  • Adjustable bottom-support rails (2)

1 kit

RJ-45 rollover cable

RJ-45 rollover cable

1

DB9F/RJ-45F PC terminal

DB9F/RJ-45F PC terminal

1

Ground lug kit

Ground lug kit

  • Two-hole lug (1)

  • M4 x 8-mm Phillips pan-head screws (2)

1 kit

Cable straps

Cable tie, 8.5 inches (10)

1 set

ESD wrist strap

ESD wrist strap (disposable)

1

Not applicable

Hazardous substances list for customers in China

1

Not applicable

Cisco Information Packet

1

Not applicable

1-Year Limited Warranty for Hardware

1

Not applicable

GR-1089 Installation and Caution Instructions

1


Note

If you do not receive a part that is listed in this document, contact Cisco Technical Support at this URL: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.

If you purchased this product through a Cisco reseller, you may receive contents in your kit, such as documentation, hardware, and power cables.

The product shipment includes a power cord for each 3-kW AC or Universal AC/DC power supply. You supply a grounding cable (6 AWG recommended) for up to 45 A.

The shipped cables depend on your specification when placing an order. The available power cords are as follows:

  • AC power supply cords

    • CAB-AC-16A-AUS—power cord, 250 VAC 16 A, C19, Australia

    • CAB-AC-16A-CH—power cord, 16 A, China

    • CAB-AC-2500W-EU—power cord, 250 VAC 16 A, Europe

    • CAB-AC-2500W-INT—power cord, 250 VAC 16 A, International

    • CAB-AC-2500W-ISRL—power cord, 250 VAC 16 A, Israel

    • CAB-AC-2500W-US1—power cord, 250 VAC 16 A, straight-blade NEMA 6

    • CAB-AC-C6K-TWLK—power cord, 250 VAC 16 A, twist lock, NEMA L6-20

    • CAB-C19-CBN—cabinet jumper power cord, 250 VAC 16 A, C20C

    • CAB-ACS-16—power cord, 16 A, Switzerland

    • CAB-L520P-C19-US—NEMA L5-20 to IEC-C19, 6 ft, US

  • Universal AC/DC power supply cords

    • CAB-AC-20A-SG-C20—Jumper, 250 VAC 20 A, IEC C20/Saf-D-Grid, North America

    • CAB-HV-25A-SG-US1—power cord, 277 VAC/240 VDC/380 VDC 25 A, Saf-D-Grid/Saf-D-Grid, North America

    • CAB-HV-25A-SG-US2—power cord, 277 VAC/240 VDC/380 VDC 25 A, Ring Terminal/Saf-D-Grid, North America

Was this Document Helpful?

FeedbackFeedback

Contact Cisco