feature bgp
To enable the Border Gateway Protocol (BGP), use the feature bgp command. To disable BGP, use the no form of this command.
feature bgp
no feature bgp
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration.
Command History
Release |
Modified |
---|---|
4.0(1) |
This command was introduced. |
Usage Guidelines
You must enable the BGP feature before you can configure BGP.
This command requires the Enterprise Services license.
Examples
This example shows how to enable a BGP configuration:
switch# configure terminal
switch(config)# feature bgp