Cisco Nexus 7000 Series Switches Configuration Guide: The Catena Solution 8.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 19, 2024

Chapter: New and Changed Information

New and Changed Information

New and Changed Information

The table below summarizes the new and changed information in this document, and shows the releases in which each feature is supported. Your software release might not support all the features in this document. For the latest caveats and feature information, see the Bug Search Tool at https://tools.cisco.com/bugsearch/ and the release notes for your software release.

Table 1. New and Changed Catena Features
Feature Name	Description	Release	Where Documented
The Catena Solution	Introduced this feature. The following commands were introduced: access-list catena catena device-group catena port-group catena vlan-group chain feature catena interface node probe show catena show running-config catena vlan	8.0(1)	Configuring the Catena Soution

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)