- Preface
- New and Changed Information
- Overview
- Configuring Switch Profiles
- Configuring Module Pre-Provisioning
- Using Cisco Fabric Services
- Configuring PTP
- Configuring User Accounts and RBAC
- Configuring Session Manager
- Configuring Online Diagnostics
- Configuring System Message Logging
- Configuring Smart Call Home
- Configuring Rollback
- Configuring DNS
- Configuring SNMP
- Configuring RMON
- Configuring SPAN
- Configuring ERSPAN
- Configuring NTP
- Configuring EEM
- Configuring OpenFlow
- Configuring NetFlow
- Configuring Secure Erase
- Soft Reload
- Configuring GIR (Cisco NX-OS Release 7.3(0)N1(1))
- Configuring GIR (Cisco NX-OS Release 7.1(0)N1(1))
- Class-based Quality-of-Service MIB
- Index
New and Changed Information
This chapter contains the following sections:
New and Changed Information
The following table provides an overview of the significant changes made to this configuration guide. The table does not provide an exhaustive list of all changes made to this guide or all new features in a particular release.
|
Feature |
Release |
Description |
Where Documented |
|---|---|---|---|
|
Class-based Quality-of-Service MIB |
7.1(1)N1(1) |
Provides the Simple Network Management Protocol (SNMP) MIB that enables retrieval of class-map and policy-map configuration and statistics. |
|
|
Isolate and Maintenance Mode Enhancement |
7.1(0)N1(1) |
Provides the ability to gracefully eject a switch and isolate it from the network so that debugging or an upgrade can be performed. The switch is removed from the regular switching path and put into a maintenance mode. Once maintenance on the switch is complete, you can bring the switch into full operational mode. |
Feedback