New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 6000 Series NX-OS Multicast Routing Configuration Guide, Release 7.x. The latest version of this document is available at the following Cisco website:

http://www.cisco.com/en/US/partner/products/ps12806/products_installation_and_configuration_guides_list.html

To check for additional information about Cisco NX-OS Release 7.x, see the Cisco Nexus 6000 Series NX-OS Release Notes, Release 7.x available at the following Cisco website:

http://www.cisco.com/en/US/products/ps 12806 /prod_release_notes_list.html

Table 1 summarizes the new and changed features for the Cisco Nexus 6000 Series NX-OS Multicast Routing Configuration Guide, Release 7.x, and tells you where they are documented.

 

Table 1 New and Changed Features for Release 7.x

Feature
Description
Changed in Release
Where Documented

PIM SSM on vPC

Added support for PIM SSM on vPC

7.3(0)N1(1)

“Configuring SSM,”

ip pim spt-threshold infinity command

This command was introduced for PIM.

7.0(0)N1(1)

“Configuring PIM,”Configuring PIM Sparse Mode