Cisco Nexus 6000 Series NX-OS Multicast Routing Configuration Guide, Release 6.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 30, 2013
Chapter: New and Changed Information
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 6000 Series NX-OS Multicast Routing Configuration Guide, Release 6.x. The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for additional information about Cisco NX-OS Release 5.x, see the Cisco Nexus 6000 Series NX-OS Release Notes, Release 6.x available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
Table 1 summarizes the new and changed features for the Cisco Nexus 6000 Series NX-OS Multicast Routing Configuration Guide, Release 6.x, and tells you where they are documented.
|
|
|
|
|
|---|---|---|---|
The maximum entries for this command has increased to 16,000. |
“Configuring PIM,” Setting the Maximum Number of Entries in the Multicast Routing Table, page 1-24 |
||
No new features were introduced to this book for Cisco NX-OS Release 6.0(2)N1(2) |
|||
Cisco NX-OS Release 6.0(2)N1(1) was the initial product release for the Cisco Nexus 6000 switch. |
Feedback