R Commands

This chapter describes the Cisco NX-OS PIM commands that begin with R.

restart pim

To restart the IPv4 Protocol Independent Multicast (PIM) process, use the restart pim command.

restart pim

 
Syntax Description

This command has no arguments or keywords.

 
Command Default

None

 
Command Modes

Any command mode

 
Supported User Roles

network-admin
network-operator
vdc-admin
vdc-operator

 
Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.

 
Usage Guidelines

This command requires the LAN Base Services license.

Examples

This example shows how to restart the PIM process:

switch(config)# restart pim
 

 
Related Commands

Command
Description

ip pim flush-routes

Enables flushing routes when the PIM process is restarted.

restart pim6

To restart the IPv6 Protocol Independent Multicast (PIM6) process, use the restart pim6 command.

restart pim6

 
Syntax Description

This command has no arguments or keywords.

 
Defaults

None

 
Command Modes

Any command mode

 
Supported User Roles

network-admin
network-operator
vdc-admin
vdc-operator

 
Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.

 
Usage Guidelines

This command requires the Enterprise Services license.

Examples

This example shows how to restart the PIM6 process:

switch(config)# restart pim6
 

 
Related Commands

Command
Description

ipv6 pim flush-routes

Enables flushing routes when the PIM6 process is restarted.