- Preface
- New and Changed Information
- Overview
- Configuring Switch Profiles
- Configuring Module Pre-Provisioning
- Using Cisco Fabric Services
- Configuring PTP
- Configuring User Accounts and RBAC
- Configuring Session Manager
- Configuring Online Diagnostics
- Configuring System Message Logging
- Configuring Smart Call Home
- Configuring Rollback
- Configuring DNS
- Configuring SNMP
- Configuring RMON
- Configuring SPAN
- Configuring ERSPAN
- Configuring NTP
- Configuring EEM
- Configuring OpenFlow
- Configuring Secure Erase
- Soft Reload
- Configuring GIR (Cisco NX-OS Release 7.3(0)N1(1))
- Configuring GIR (Cisco NX-OS Release 7.1(0)N1(1))
- Class-based Quality-of-Service MIB
- Index
New and Changed Information
The following table provides an overview of the significant changes made to this configuration guide. The table does not provide an exhaustive list of all changes made to this guide or all new features in a particular release.
|
Feature |
Description |
Release |
Where Documented |
|---|---|---|---|
|
Soft Reload |
The Soft Reload feature provides a best effort mechanism for the switch to be gracefully brought up with minimal impact to production traffic when a process crash occurs. You can also use the soft-reload command to trigger a manual soft reload of the switch. |
7.3(2)N1(1) |
|
|
GIR Enhancement |
Starting with Cisco NX-OS Release 7.3(0)N1(1), the default mode for GIR is “isolate”. Provides support for Unplanned Maintenance, Maintenance Mode timer, Supress FIB Pending, Adding Show commands to snapshots and dumping snapshot sections. You can use GIR to perform maintenance and software upgrade of the switches and the connected FEXs. A FEX group is added to optimize the procedure to bring up or take down the FEX. |
7.3(0)N1(1) |
|
|
Class-based Quality-of-Service MIB Phase 2 |
Starting with Cisco NX-OS Release 7.3(0)N1(1), the following cbQoSMIB tables are also supported by QoS policies: cbQosClassMapStats, cbQosMatchStmtStats and cbQosQueueingStats |
7.3(0)N1(1) |
|
|
Performing Software Maintenance Upgrades |
A software maintenance upgrade (SMU) is a package file that contains fixes for specific defects. SMUs are created to respond to immediate issues and do not include new features. |
7.2(1)N1(1) |
|
|
Class-based Quality-of-Service MIB |
Provides the Simple Network Management Protocol (SNMP) MIB that enables retrieval of class-map and policy-map configuration and statistics. |
7.1(1)N1(1) |
|
|
Isolate and Maintenance Mode Enhancement |
Provides the ability to gracefully eject a switch and isolate it from the network so that debugging or an upgrade can be performed. The switch is removed from the regular switching path and put into a maintenance mode. Once maintenance on the switch is complete, you can bring the switch into full operational mode. |
7.1(0)N1(1) |
|
|
OpenFlow |
OpenFlow allows a controller to direct the forwarding functions of a switch through a secure channel. |
7.0(0)N1(1) |
|
|
SPAN with ACL |
The SPAN with ACL filtering feature allows you to filter SPAN traffic so that you can reduce bandwidth congestion. |
7.0(0)N1(1) |
Feedback