Cisco Nexus 5500 Series NX-OS Quality of Service Configuration Guide, Release 7.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 12, 2015

Chapter: New and Changed Information

New and Changed Information

New and Changed Information

This chapter contains the following sections:

New and Changed Information

New and Changed Information

The following table provides an overview of the significant changes made to this configuration guide. The table does not provide an exhaustive list of all changes made to this guide or all new features in a particular release.

Feature	Release	Description	Where Documented
FEX-Based ACL Classification	7.0(3)N1(1)	The FEX-Based ACL Classification feature uses TCAM resources on a FEX to perform ACL-based packet classification of incoming packets on the switch.	Configuring FEX-Based ACL Classification
IPv6 ACL logging	7.0(1)N1(1)	The IPv6 ACL logging feature allows you to monitor ACL flows and to log dropped packets on an interface.	Configuring ACL Logging

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)