Cisco Nexus 3600 NX-OS Label Switching Configuration Guide, Release 9.3(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 23, 2019

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3600 Series NX-OS Label Switching Configuration Guide, Release 9.3(x).

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 3600 Series NX-OS Label Switching Configuration Guide, Release 9.3(x) and tells you where they are documented.

Table 1. New and Changed Features for Cisco NX-OS Release 9.3(x)
Feature	Description	Changed in Release	Where Documented
MVPNs	Introduced this feature.	9.3(3)	Configuring MVPNs
MPLS QoS	Added support for the default QoS service template to support the MPLS handoff.	9.3(1)	Configuring MPLS QoS
Segment Routing	Changed the command for configuring segment routing from segment-routing mpls to segment-routing.	9.3(1)	Configuring Segment Routing
Segment Routing	Added support for adjacency SIDs on OSPFv2.	9.3(1)	Configuring Segment Routing

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)