Cisco Nexus 3600 NX-OS VXLAN Configuration Guide, Release 9.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: February 16, 2019

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3600 NX-OS VXLAN Configuration Guide.

New and Changed Information

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
	Changed the document title from 9.x to 9.2(x)		Title page
VXLAN DHCP IPv4 Relay	Support added for Cisco Nexus 36180YC-R and 3636C-R switches.	9.2(2)	DHCP Relay in VXLAN BGP EVPN
CLI Simplification	Support added for the reduction of CLI commands.	9.2(1)	Example of VXLAN BGP EVPN (EBGP) Example of VXLAN BGP EVPN (IBGP)
VXLAN with vPC	Added support for 3600 platforms.	9.2(1)	Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide. Release 9.x

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)