Cisco Nexus 3600 NX-OS Programmability Guide, Release 7.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: September 18, 2017

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3600 Series NX-OS Programmability Guide, Release 7.x.

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 3600 Series NX-OS Programmability Guide, Release 7.x and where they are documented.

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
XMLIN	Support for converting NX-OS CLI commands to NetConf format is documented.	7.0(3)F3(1)	Converting CLI Commands to Network Configuration Format
XML Management Interface	Support for managing the Cisco Nexus 3600 switches with an XML-based tool through the XML-based Network Configuration Protocol (NETCONF) is documented.	7.0(3)F3(1)	XML Management Interface
Initial release		7.0(3)F3(1)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)