The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
A - F - M - N - R - S -Index
A
address-family ipv4 labeled-unicast 1
address-family ipv4 unicast 1 2
allocate-label {all | route-map} 1F
feature mpls static 1M
mpls ip forwarding 1N
neighbor 1
network 1R
route-map 1S
set label-index 1
show bgp ipv4 labeled-unicast 1 2
show bgp link-state 1
show bgp link-state unicast 1
show bgp paths 1
show bgp {ip | ipv6} vrf 1
show bgp {ipv4 | ipv6} unicast neighbors 1
show ip route 1
show ipv6 bgp 1
show mpls label range 1
show mpls switching 1
show route-map 1 2
show running-config bgp 1
show running-config vrf 1
show running-config | inc 'feature mpls segment-routing' 1 2
show vrf vrf-name 1