New and Changed Information

This chapter contains the following sections:

New and Changed Information

The following table provides an overview of the significant changes made to this configuration guide. The table does not provide an exhaustive list of all changes made to this guide or all new features in a particular release.

Feature

Description

Added or Changed in Release

Where Documented

Twice NAT

This feature was introduced.

6.0(2)A4(1)

Static and Dynamic Twice NAT Overview

TCP State Enhancements

syn-timeout and finrst-timeout timers were introduced.

6.0(2)A4(1)

Timeout Mechanisms

Virtual Port Channels

Added information to configure virtual port channels (vPC).

6.0(2)A3(1)

Configuring Virtual Port Channels

NAT Enhancements

Introduced pool support for dynamic NAT. The support for PAT now includes the use of the global address pool.

6.0(2)A3(1)

Pool Support for Dynamic NAT

40-Gigabit Interface Support

You can enable 40-Gigabit interface speed on the first port of a group of four adjacent ports. Up to 12 interfaces in 40-Gigabit speed are supported.

6.0(2)A1(1)

Configuring Layer 2 Interfaces

Static and Dynamic NAT Translation

Dynamic Network Address Translation (NAT) translates a group of real IP addresses into mapped IP addresses that are routable on a destination network.

6.0(2)A1(1)

Configuring Static NAT