Cisco Nexus 3500 Series Software Release - Software Advisory Notice

Available Languages

Download Options

  • PDF     (186.9 KB)
    View with Adobe Reader on a variety of devices
Updated:December 8, 2017

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Software Advisory Notice

Dear Cisco Customer,
Cisco engineering has identified a software issue with the release that you have selected that may affect your use of this software. Please review the advisory notice here to determine if the issue applies to your environment. Customers are urged to upgrade to the recommended solution image or most current software version.

If you are currently running a release older than Cisco NX-OS Release 6.0(2)A8(3), you must perform an intermediate upgrade to Cisco NX-OS Release 6.0(2)A8(3) image before upgrading to Cisco NX-OS Release 6.0(2)A8(7a). If you do not follow this instruction, the device may not boot or become unusable. See the Software Affected/Solution table that follows for the list of affected images and solution images.

For additional information about what is included in this software, please refer to the Cisco Nexus 3548 Series Release Notes, available at  Cisco Nexus 3000 Series Switches Release Notes  page. Release notes are in the Release and General Information section on the product page.

Table of Affected Software and Solution

Software Type

Software Affected

Version(s)

Software Solution

Version(s)

Availability

(mm/dd/yyyy)

 Cisco NX-OS Software

Releases older than Cisco NX-OS Release 6.0(2)A8(3)

Cisco NX-OS Release 6.0(2)A8(3)

10/31/2016

 

Affected Platforms:

Cisco Nexus 3548 Switches

 

Workaround:

Download and install Cisco NX-OS Release 6.0(2)A8(3).

 

Disclaimer:

In order to increase network availability, Cisco recommends that you upgrade affected images with the suggested replacement software images. Cisco will discontinue manufacturing shipment of affected images. Any pending order will be substituted by the replacement software images. PLEASE BE AWARE THAT FAILURE TO UPGRADE THE AFFECTED SOFTWARE MAY RESULT IN NETWORK DOWNTIME. The terms and conditions that governed your rights and obligations and those of Cisco, with respect to the deferred software will apply to the replacement software.

The terms and conditions that governed your rights and obligations and those of Cisco, with respect to the deferred software will apply to the replacement software.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

 

 

 

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco