|
|
|
|
VSI Discovery and Configuration Protocol |
Added new section for troubleshooting commands for the VSI Discovery and Configuration Protocol (VDP). |
4.2(1)SV2(2.2) |
VSI Discovery and Configuration Protocol |
VXLAN Gateway |
Added a section for troubleshooting commands for VXLAN Gateway.
Note Starting with Release 5.2(1)SV3(1.15), Cisco Nexus 1000V for VMware vSphere does not support the VXLAN Gateway feature.
|
4.2(1)SV2(2.1) |
VXLANs |
Upgrade |
Added section for problems with VSM-VEM Layer 2 to 3 Conversion Tool. |
4.2(1)SV2(1.1) |
Upgrades |
Ethanalyzer |
Added Ethanalyzer as a Cisco Nexus 1000V protocol analyzer tool content. |
4.2(1)SV2(1.1) |
Ethanalyzer |
DHCP Enhancements |
Added the troubleshooting commands for DHCP. |
4.2(1)SV2(1.1) |
DHCP, DAI, and IPSG Troubleshooting Commands |
High Availability |
Updated the high availability section. Added a command output for the new show system internal active-active remote accounting logs command and updated the output for the show system redundancy status command. |
4.2(1)SV2(1.1) |
High Availability |
Licensing |
Added the svs license transfer src-vem vem no license_pool command to troubleshoot the issues with checking out the licenses or returning them to the license pool. |
4.2(1)SV2(1.1) |
License Troubleshooting Commands |
Nexus 1000V VC Plugin Installation |
Added a new section to troubleshoot the Cisco Nexus 1000V VC plugin installation. |
4.2(1)SV2(1.1) |
vCenter Plug-in |
Nexus 1000V Installation Management Center |
Added a new section to troubleshoot the Cisco Nexus 1000V Installation Management Center. |
4.2(1)SV1(5.1) |
Problems with the Cisco Nexus 1000V Installation Management Center |
Recovering Management and Control Connectivity of a Host |
Added a new section to recover management and control connectivity of a host when a VSM is running on a VEM. |
4.2(1)SV1(5.1) |
Recovering Management and Control Connectivity of a Host When a VSM is Running on a VEM |
ACL Logging |
Added a new section to troubleshoot ACL Logging. |
4.2(1)SV1(5.1) |
Troubleshooting ACL Logging |
NSM |
Added a new chapter to troubleshoot the Network Segmentation Manager (NSM). |
4.2(1)SV1(5.1) |
Network Segmentation Manager |
VXLAN |
Added a new chapter to troubleshoot the Virtual Extensible Local Area Network (VXLAN). |
4.2(1)SV1(5.1) |
VXLANs |
Microsoft NLBUnicast Mode |
Added a new section for troubleshooting Microsoft Network Load Balancing (NLB) unicast mode. |
4.2(1)SV1(5.1) |
Layer 2 Switching |
In service software upgrade (ISSU) |
Added a new section for troubleshooting ISSU. |
4.2(1)SV1(4a) |
Upgrades |
VEM software upgrade |
Added a new section for troubleshooting a VEM software upgrade. |
4.2(1)SV1(4a) |
Upgrades |
DHCP, DAI, IPSG |
Added a new section for troubleshooting DHCP, Dynamic ARP Inspection, and IP Source Guard. |
4.2(1)SV1(4) |
DHCP, DAI, and IPSG |
Port profiles |
Added a new section for port profiles and new information about quarantined port profiles. |
4.2(1)SV1(4) |
Port Profiles |
Upgrade |
Added a new section for troubleshooting upgrade problems. |
4.2(1)SV1(4) |
Upgrades |
VEM health check |
Added information about the VEM health check that shows the cause of a connectivity problem. |
4.0(4)SV1(3) |
Checking Network Connectivity Between the VSM and the VEM |
Storm Control |
Added information about how to identify and resolve the problems related to storm control. |
5.2(1)SV3(1.1) |
Storm Control |
L3Sec |
Added information about how to secure the internal control plane communications (Control and Packet traffic) of Cisco Nexus 1000V in a more robust way than in previous releases. It operates only in Layer 3 control mode. |
5.2(1)SV3(1.1) |
L3Sec |