|
|
show module module-number |
Displays the state of a module. See Example 8-1 on page 8-10 . |
show svs domain |
Displays the domain configuration. See Example 8-2 on page 8-10 . |
show svs connections |
Displays the Cisco Nexus 1000V connections. See Example 8-3 on page 8-10 . |
show cdp neighbors |
Displays the neighbors connected to an interface. See Example 8-4 on page 8-10 . |
show port internal event-history interface |
Displays information about the internal state transitions of the port. See Example 8-5 on page 8-11 . |
show logging logfile |
Displays logged system messages. See Example 8-6 on page 8-11 . |
show logging logfile |grep interface_number |
Displays logged system messages for a specified interface. See Example 8-7 on page 8-11 . |
show interface brief |
Displays a table of interface states. See Example 8-8 on page 8-11 . |
show interface ethernet |
Displays the configuration for a named Ethernet interface, including the following:
- Administrative state
- Speed
- Trunk VLAN status
- Number of frames sent and received
- Transmission errors, including discards, errors, CRCs, and invalid frames
See Example 8-9 on page 8-11 . See Example 8-10 on page 8-12 . |
show interface ethernet counters |
Displays port counters for identifying synchronization problems. For information about counters, see “Information About Interface Counters” section. See Example 8-11 on page 8-12 . |
show interface vethernet |
Displays the vEthernet interface configuration. See Example 8-12 on page 8-12 . |
show interface status |
Displays the status of the named interface. |
show interface capabilities |
Displays tabular view of all configured port profiles. See Example 8-13 on page 8-13 . |
show interface virtual port mapping |
Displays the virtual port mapping for all vEthernet interfaces: See Example 8-14 on page 8-14 . |
show system internal ethpm errors |
|
show system internal ethpm event-history |
|
show system internal ethpm info |
|
show system internal ethpm mem-stats |
|
show system internal ethpm msgs |
|
show system internal vim errors |
|
show system internal vim event-history |
|
show system internal vim info |
|
show system internal vim mem-stats |
|
show system internal vim msgs |
|
module vem execute vemcmd show portsec status |
Displays the port security status of the port. If enabled, the output shows an LTL connected to the VM network adapter. See Example 8-15 on page 8-14 |
show port-security |
Displays information about the secured MAC addresses in the system. See Example 8-16 on page 8-15 . |
show port-security interface veth |
Displays secure vEthernet interfaces. |
show port -security address vethernet |
Displays information about secure addresses on an interface. See Example 8-17 on page 8-15 . |
show system internal port-security msgs |
|
show system internal port-security errors |
|
show system internal l2fm msgs |
|
show system internal l2fm errors |
|
show system internal l2fm info detail |
|
show system internal pktmgr interface brief |
|
show system internal pktmgr client detail |
|