X Commands
This chapter describes the Cisco Nexus 1010 commands that begin with the letter X.
xml server max-session
To set the number of allowed XML server sessions, use the xml server max-session command.
xml server max-session sessions
Syntax Description
sessions |
Maximum number of XML sessions permitted at one time. The range is from 1 to 8. |
Defaults
The default maximum number of sessions is eight.
Command Modes
Global configuration (config)
network-admin
Command History
|
|
|
4.0(4)SP1(1) |
This command was introduced. |
Examples
This example shows how to set the number of allowed XML server sessions to 6:
n1010# config t
n1010# xml server max-session 6
n1010#
Related Commands
xml server terminate session
To terminate the specified XML server session, use the xml server terminate session command.
xml server terminate session session-number
Syntax Description
session-number |
Identifier for an existing XML server session. The range is from 0 to 214748364. |
Defaults
None
Command Modes
Any
network-admin
Command History
|
|
|
4.0(4)SP1(1) |
This command was introduced. |
Examples
This example shows how to terminate the XML server session 8665:
n1010# xml server terminate 8665
n1010#
Related Commands
xml server timeout
To set the number of seconds after which an inactive XML server session is terminated, use the xml server timeout command.
xml server timeout seconds
Syntax Description
seconds |
Maximum time that the XML server can remain inactive before session termination. The range is from 0 to 1200 seconds. |
Defaults
None
Command Modes
Global configuration (config)
network-admin
Command History
|
|
|
4.0(4)SP1(1) |
This command was introduced. |
Examples
This example shows how to set the XML server timeout to 600 seconds:
n1010# config t
n1010# xml server timeout 600
n1010#
Feedback