Cisco Nexus 1000V Command Reference, Release 4.0(4)SV1(2)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- December 11, 2009
Chapter: Q Commands
Q Commands
This chapter describes the Cisco Nexus 1000V commands that begin with the letter Q.
qos statistics
To enable the recording of QoS statistics, use the qos statistics command. To disable the recording of QoS statistics,, use the no form of this command.
qos statistics
no qos statistics
Syntax Description
This command has no arguments or keywords.
Defaults
QoS statistics recording is enabled by default.
Command Modes
Global configuration (config)
network-admin
Command History
|
|
|
4.0(4)SV1(1) |
This command was introduced. |
Examples
This example shows how to enable the recording of QoS statistics:
n1000v# configure terminal
n1000v(config)#qos statistics
n1000v(config)#
Related Commands
|
|
|
|---|---|
show policy-map |
Displays the policy map configuration for all policy maps or for a specified policy map. |
Feedback