Information About Prerequisites
This section provides information about product prerequisites in the Cisco vPath Ecosystem.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
This section provides information about product prerequisites in the Cisco vPath Ecosystem.
Before you install the Cisco Nexus 1000V, see the prerequisites at the following location:
Before you install and configure Cisco Prime NSC:
See the prerequisites at the following location:
Complete the fields in the following table:
Required Information | Your Information | ||
---|---|---|---|
For deploying the Cisco Prime NSC OVA |
|||
Name |
|||
Location of files |
|||
Data store location |
|||
Storage location, if more than one location is available |
|||
Management port profile name for VM management
|
|||
IP address |
|||
Subnet mask |
|||
Gateway IP address |
|||
Domain name |
|||
DNS server IP address
|
|||
Admin password |
|||
Shared secret password for communication between Cisco Prime NSC, Cisco VSG, Cisco ASA 1000V, and VSM. |
|||
For Configuring VMware vCenter in Cisco Prime NSC |
|||
vCenter name | |||
Description | |||
Hostname or IP address |
Before you install Cisco VSG, see the prerequisites at the following location;
Before you deploy Cisco ASA 1000V, make sure that you complete the following tasks:
Review the process for deployment in the Cisco ASA 1000V Getting Started Guide at the following location:
Review answers to the most frequently asked questions (FAQs) listed in the Cisco ASA 1000V Getting Started Guide at the following location:
Before you deploy Cisco ASA 1000V, you must perform the following tasks in the order specified:
Before you install Citrix NetScaler 1000V, see the prerequisites at the following location:
Before you install Cisco vWAAS, see the prerequisites at the following location:
Before you install the Cisco Nexus CSP, see the prerequisites at the following location:
Prerequisites for Installing the Cisco Nexus Cloud Services Platform