The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document includes the following sections:
•Installing VSM on Cisco Cloud Services Platform
You can install the Cisco Nexus 1000V VSM on the Cloud Services Platform.
Note Layer 3 mode is supported for Cisco Nexus 1000V for Hyper-V.
Copy the ISO file to the bootflash:repository/ of the virtual service blade as displayed in the following example.
switch(config)# dir bootflash:repository
16384 Feb 21 11:31:10 2013 lost+found/
169932800 May 08 20:20:09 2013 n1000vh-dk9.5.2.1.SM1.5.0.345.iso
653 May 08 20:28:24 2013 vmpresults.txt
Usage for bootflash://sup-local
326832128 bytes used
3664547840 bytes free
3991379968 bytes total
switch(config)#
Complete the following steps to install the VSM on the Cloud Services Platform:
Step 1 Create a virtual service blade by entering the following commands.
switch(config)#show virtual-service-blade summary
---------------------------------------------------------------------------------
Name HA-Role HA-Status Status Location
---------------------------------------------------------------------------------
switch(config)#virtual-service-blade vsm-1
switch(config-vsb-config)#virtual-service-blade-type new n1000vh-dk9.5.2.1.SM1.5.0.345.iso
switch(config-vsb-config)#show virtual-service-blade summary
--------------------------------------------------------------------------------------
Name HA-Role HA-Status Status Location
--------------------------------------------------------------------------------------
vsm-1 PRIMARY NONE VSB NOT PRESENT PRIMARY
vsm-1 SECONDARY NONE VSB NOT PRESENT SECONDARY
switch(config-vsb-config)#
Step 2 Configure the control and packet VLANs for static and flexible topologies. Note that no provisioning is allowed for Management VLAN as the Management class interface uses the Management VLAN of the Cloud Services Platform (CSP).
switch(config-vsb-config)#interface control vlan 391
switch(config-vsb-config)#interface packet vlan 392
Step 3 Configure the Cisco Nexus 1000V on the Cisco Cloud Services Platform.
switch(config-vsb-config)#enable
Enter vsb image: [n1000vh-dk9.5.2.1.SM1.5.0.345.iso]
Enter domain id[1-1023]: 391
Management IP version [V4/V6]: [V4]
Enter Management IP address: 172.16.5.5
Enter Management subnet mask: 255.255.255.0
IPv4 address of the default gateway: 172.16.5.1
Enter HostName: vsm-1
Enter the password for `admin': ********
Note: VSB installation is in progress, please use show virtual-service-blade commands to check the installation status.
switch(config-vsb-config)#
Step 4 Display the primary and secondary VSM status.
switch(config-vsb-config)#show virtual-service-blade summary
-------------------------------------------------------------------------------
Name HA-Role HA-Status Status Location
-------------------------------------------------------------------------------
VSM-1 PRIMARY NONE VSB DEPLOY IN PROGRESS PRIMARY
VSM-1 SECONDARY NONE VSB NOT PRESENT SECONDARY
switch(config-vsb-config)#
Step 5 Log in to the VSM.
switch(config)#virtual-service-blade vsm-1
switch(config-vsb-config)#login virtual-service-blade vsm-1
Telnet escape character is `^\'.
Trying 172.1.0.18...
Connected to 172.1.0.18.
Escape character is `^\'.
Nexus 1000v Switch
vsm-1 login: admin
Password:
Cisco Nexus operating System (NX-OS) Software
TAC support: http://www/cisco.com/tac
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch# show system redundancy status
Redundancy role
---------------
administrative: primary
operational: primary
Redundancy mode
---------------
administrative: HA
operational: HA
This supervisor (sup-1)
-----------------------
Redundancy state: Active
Supervisor state: Active
Internal state: Active with HA standby
Other supervisor (sup-2)
------------------------
Redundancy state: Standby
Supervisor state: HA standby
Internal state: HA standby
switch#
For more information, refer to the Logging into VSM section in the guide.