Table Of Contents
Cisco Nexus Cloud Services Platform Troubleshooting Guide, Release 4.2(1)SP1(6.1)
Information About Cisco Nexus Cloud Services Platform
Overview of the Troubleshooting Process
Accessing External USB/CD to View Troubleshooting Logs
Contacting Cisco Customer Support
Problems with Cisco Nexus Cloud Services Platform
Cisco Nexus Cloud Services Platform Troubleshooting Commands
Shutting Down Cisco Nexus Cloud Services Platform
Obtaining Documentation and Submitting a Service Request
Cisco Nexus Cloud Services Platform Troubleshooting Guide, Release 4.2(1)SP1(6.1)
Revised: June 21, 2013
OL-28990-01This document describes how to identify and resolve problems with the Cisco Nexus Cloud Services Platform product family and includes the following topics:
•Information About Cisco Nexus Cloud Services Platform
•Overview of the Troubleshooting Process
•Contacting Cisco Customer Support
•Problems with Cisco Nexus Cloud Services Platform
•Cisco Nexus Cloud Services Platform Troubleshooting Commands
•Obtaining Documentation and Submitting a Service Request
Information About Cisco Nexus Cloud Services Platform
For detailed information about the overview of the Cisco Nexus Cloud Services Platform product family and how to install and upgrade Cisco Nexus Cloud Services Platform, see the Cisco Nexus Cloud Services Platform Software Installation and Upgrade Guide, Release 4.2(1)SP1(6.1).
For detailed information about how to configure the Cisco Nexus Cloud Services Platform product family, see the Cisco Nexus Cloud Services Platform Software Configuration Guide, Release 4.2(1)SP1(6.1).
Overview of the Troubleshooting Process
To troubleshoot your network, follow these general steps:
Step 1 Gather information that defines the specific symptoms.
Step 2 Identify all potential problems that could be causing the symptoms.
Step 3 Systematically eliminate each potential problem (from most likely to least likely) until the symptoms disappear.
Overview of Best Practices
Best practices are the recommended steps you should take to ensure the proper operation of your network. We recommend the following general best practices for most networks:
•Maintain a consistent Cisco Nexus Cloud Services Platform release across all network devices.
•Refer to the release notes for your Cisco Nexus Cloud Services Platform release for the latest features, limitations, and caveats.
•Enable system message logging.
•Verify and troubleshoot any new configuration changes after implementing the change.
Troubleshooting with Logs
Cisco Nexus Cloud Services Platform generates many types of system messages on the switch and sends them to a syslog server. These messages can be viewed to determine what events may have led up to the current problem condition you are facing.
Use the following commands to access and view logs in the Cisco Nexus Cloud Services Platform:
•To view logs enter the following command:
show logging
•To view Cisco Nexus Cloud Services Platform information enter the following command:
show tech-support nexus1010
•To access agent logs, enter the following command:
nexus-1010-system get agent logs
•To access agent logs, sos report, and other logs enter the following command:
vsa-system get agent logs
•To access redundancy logs, enter the following command:
show system internal redundancy trace
show system redundancy status
•To access default enabled logs, enter the following command:
show nexus1010-mgr internal event-history errors > bootflash:log
Note The output of nexus-1010-system get agent logs and vsa-system get agent logs command is the same. In the future, nexus-1010-system get agent logs command will be deprecated.
Accessing External USB/CD to View Troubleshooting Logs
In the event of any failure on the Cisco Nexus Cloud Services Platform or loss in network connectivity, you can access an external USB or CD to copy the logs for troubleshooting.
You can use the following procedure to copy the logs
Step 1 Enable the auxillary feature using the following command:
switch# configure terminal
switch# [no] feature auxillary [cdrom|usb]
Step 2 Access an external USB or CD. The physical parameter represents a physical USB or CD drive. The virtual parameter represents a virtual drive that is mapped through the KVM console on the CIMC.
switch# [no] mount [physical |virtual]
Step 3 Copy the logs to the repository.
switch# copy bootflash:usb|v-usb|cdrom|v-cdrom| bootflash:repository
Cisco Support Communities
For additional information, visit one of the following support communities:
•Cisco Support Community for Server Networking
•Cisco Communities: Nexus 1000V
Contacting Cisco Customer Support
If you are unable to solve a problem after using the troubleshooting suggestions in this guide, contact a customer service representative for assistance and further instructions. Before you call, have the following information ready to help your service provider assist you as quickly as possible:
•Version of the Cisco Nexus Cloud Services Platform software that you are running
•Contact phone number.
•Brief description of the problem
•Brief explanation of the steps you have already taken to isolate and resolve the problem
After you have collected this information, see the Obtaining Documentation and Submitting a Service Request, page 9.
Problems with Cisco Nexus Cloud Services Platform
This section includes symptoms, possible causes and solutions for the following problems with Cisco Nexus Cloud Services Platform product family.
Cisco Nexus Cloud Services Platform Troubleshooting Commands
You can use the commands in this section to troubleshoot problems related to Cisco Nexus Cloud Services Platform.
For detailed information about show command output, see the Cisco Nexus Cloud Services Platform Command Reference, Release 4.2(1)SP1(6.1).
Shutting Down Cisco Nexus Cloud Services Platform
To shut down Cisco Nexus Cloud Services Platform including the VSBs, use the following command:
switch# shutdown [primary| secondary]
When you execute this command, first all the VSBs will shutdown and then the Cisco Nexus Cloud Services Platform will shutdown. By default, the command will shutdown both the primary and the secondary Cisco Nexus Cloud Services Platform.
To shutdown the primary Cisco Nexus Cloud Services Platform, use the following command:
switch# shutdown primary
To shutdown the secondary Cisco Nexus Cloud Services Platform, use the following command:
switch# shutdown secondary
This command prevents the abrupt shutdown of the VSBs
When the Cisco Nexus Cloud Services Platform is powered off from CIMC, some of the VSBs may not receive the signal to power down. This command prevents the abrupt shutdown of the VSBs.
Additional References
Related Topic Document TitleHardware installation
Cisco Nexus Cloud Services Platform Hardware Installation Guide
Software installation and upgrade
Cisco Nexus Cloud Services Platform Software Installation and Upgrade Guide, Release 4.2(1)SP1(6.1)
Cisco Nexus Cloud Services Platform software configuration
Cisco Nexus Cloud Services Platform Software Configuration Guide, Release 4.2(1)SP1(6.1)
Cisco Nexus Cloud Services Platform commands
Cisco Nexus Cloud Services Platform Command Reference, Release 4.2(1)SP1(6.1)
CIMC management
Password Recovery Procedure for Cisco NX-OS
http://www.cisco.com/en/US/docs/switches/datacenter/sw/password_recovery/nx_os_pw.html
Related Documentation
This section lists the documents used with the Cisco Nexus Cloud Services Platform and available on Cisco.com at the following URL:
http://www.cisco.com/en/US/products/ps12752/tsd_products_support_series_home.html
General Information
Cisco Nexus Cloud Services Platform Release Notes, Release 4.2(1)SP1(6.1)
Install and Upgrade
Cisco Nexus Cloud Services Platform Hardware Installation Guide
Cisco Nexus Cloud Services Platform Software Installation and Upgrade Guide, Release 4.2(1)SP1(6.1)
Regulatory Compliance and Safety Information for the Cisco Nexus 1000 Series
Cisco Nexus Cloud Services Platform Quick Start Guide
Configuration Guide
Cisco Nexus Cloud Services Platform Software Configuration Guide, Release 4.2(1)SP1(6.1)
Reference Guides
Cisco Nexus Cloud Services Platform Command Reference, Release 4.2(1)SP1(6.1)
Cisco Nexus Cloud Services Platform Compatibility Information Guide
Troubleshooting and Alerts
Cisco Nexus Cloud Services Platform Troubleshooting Guide
Nexus 1000V Documentation
For the Cisco Nexus 1000V for VMware vSphere Docuementation:
http://www.cisco.com/en/US/products/ps9902/tsd_products_support_series_home.html
For the Cisco Nexus 1000V for Microsoft Hyper-V Documentation:
https://www.cisco.com/en/US/products/ps13056/tsd_products_support_series_home.html
Virtual Security Gateway Documentation
Cisco Virtual Security Gateway for Nexus 1000V Series Switch
Virtual Network Management Center
Cisco Virtual Network Management Center
Virtual Wide Area Application Services (vWAAS)
Cisco Virtual Wide Area Application Services (vWAAS)
ASA 1000V Cloud Firewall
Cisco ASA 1000V Cloud Firewall
Network Analysis Module Documentation
http://www.cisco.com/en/US/products/sw/cscowork/ps5401/tsd_products_support_series_home.html
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.