Cisco MDS 9000 Series NX-OS High Availability and Redundancy Configuration Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- September 5, 2016
Chapter: New and Changed Information
New and Changed Information
As of Cisco MDS NX-OS Release 4.2(1), software configuration information is available in new feature-specific configuration guides for the following information:
- System management
- Interfaces
- Fabric
- Quality of service
- Security
- IP services
- High availability and redundancy
The information in these new guides previously existed in the Cisco MDS 9000 Series CLI Configuration Guide and in the Cisco MDS 9000 Series Fabric Manager Configuration Guide . Those configuration guides remain available on Cisco.com and should be used for all software releases prior to MDS NX-OS Release 4.2(1). Each guide addresses the features introduced in or available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.
For a complete list of document titles, see the list of Related Documentation in the "Preface."
To find additional information about Cisco MDS NX-OS Release 4.2(x), see the Cisco MDS 9000 Series Release Notes available at the Cisco Systems website.
About this Guide
The information in the new Cisco MDS 9000 NX-OS High Availability and Redundancy Configuration Guide previously existed in Part 2: Installation and Switch Management of the Cisco MDS 9000 Series CLI Configuration Guide.
There are no new or changed CLI features for high availability and redundancy in MDS NX-OS Release 4.2(1).
Feedback