The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
about DMM 1-1
active-passive arrays 3-31
Array-Specific Library. See ASL
ASL 4-37
best practices 5-39
CLI command reference A-1
CLI 6-55
configuring IP connectivity 2-14
lifecycle 1-6
planning 4-35
software requirements 1-8
delayed server reconfiguration 1-6
best practices 5-39
command reference A-1
configuring migration rate 2-22
server-based migration 1-4
topologies 3-25
enabling DMM 2-17
configuring 4-37
error reason codes 5-49
about 1-2
configuring 4-36
FC Redirect 3-25
guidelines for deploying DMM 2-13
heterogeneous SANs 3-25
homogeneous SANs 3-25
installing DMM 2-11
IP configuration 2-14
for fixed slot - MDS 9222i Switch 2-12
for MSM-18/4 module-MDS 9200 Series with SSM 2-12
LUN 1-3
deleting 6-70
overview 1-4
finishing 6-70
finishing, cli command 6-67
overview 1-5
configuring 4-36
about 1-2
configuring 4-36
Ports in a Server-Based Job 3-29
Server Lunmap Discovery Tool. See SLD
SLD 4-37
including in a job 3-29
about 3-25
guidelines 3-27
checklist 5-40
configuring 6-57
about 1-3
Index
about DMM 1-1
active-passive arrays 3-31
Array-Specific Library. See ASL
ASL 4-37
best practices 5-39
CLI command reference A-1
CLI 6-55
configuring IP connectivity 2-14
lifecycle 1-6
planning 4-35
software requirements 1-8
delayed server reconfiguration 1-6
best practices 5-39
command reference A-1
configuring migration rate 2-22
server-based migration 1-4
topologies 3-25
enabling DMM 2-17
configuring 4-37
error reason codes 5-49
about 1-2
configuring 4-36
FC Redirect 3-25
guidelines for deploying DMM 2-13
heterogeneous SANs 3-25
homogeneous SANs 3-25
installing DMM 2-11
IP configuration 2-14
for fixed slot - MDS 9222i Switch 2-12
for MSM-18/4 module-MDS 9200 Series with SSM 2-12
LUN 1-3
deleting 6-70
overview 1-4
finishing 6-70
finishing, cli command 6-67
overview 1-5
configuring 4-36
about 1-2
configuring 4-36
Ports in a Server-Based Job 3-29
Server Lunmap Discovery Tool. See SLD
SLD 4-37
including in a job 3-29
about 3-25
guidelines 3-27
checklist 5-40
configuring 6-57
about 1-3