New and Changed Information

---

As of Cisco Fabric Manager Release 4.2(1), software configuration information is available in new feature-specific configuration guides for the following information:

•System management

•Interfaces

•Fabric

•Quality of service

•Security

•IP services

•High availability and redundancy

The information in these new guides previously existed in the Cisco MDS 9000 Family CLI Configuration Guide and in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Those configuration guides remain available on Cisco.com and should be used for all software releases prior to Cisco Fabric Manager Release 5.0(1a). Each guide addresses the features introduced in or available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.

For a complete list of document titles, see the list of Related Documentation in the "Preface."

To find additional information about Cisco Fabric Manager Release 5.0(1a), see the Cisco MDS 9000 Family Release Notes available at the following Cisco Systems website:

http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.htm

About This Guide

The information in the new Cisco Fabric Manager Inter-VSAN Routing Configuration Guide previously existed in the Fabric Configuration section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide, Release 4.2(1).

Table 1 lists the New and Changed features for this guide, starting with Cisco Fabric Manager Release 5.0(1a).

Table 1 New and Changed Features for Cisco Fabric Manager Release 5.0(1a)

Feature	New or Changed Topics	Changed in Release	Where Documented
IOA support	Updated "Enabling Advanced Fabric Services on IVR Flows" section.	5.0(1a)	Chapter 2, "Advanced Inter-VSAN Routing Configuration"
AAM support	Added information on AAM support and their guidelines.	5.01(1a)	Chapter 2, "Advanced Inter-VSAN Routing Configuration"