New and Changed Information
The following tables provide an overview of the significant changes to the chapters in this guide up to the current release. The table does not provide an exhaustive list of all changes made to the topics or of the new features up to this release.
Feature |
Description |
Where Documented |
---|---|---|
Port breakout supported on ports 1 through 34 for the Cisco Nexus N9K-C9336C-FX2 switch |
Starting in the 4.2(4) and 5.0(1) releases, 40Gb and 100Gb dynamic breakouts are supported on ports 1 through 34, and all 34 ports can be configured as breakout ports. Prior to the 4.2(4) and 5.0(1) releases, breakouts were supported only on ports 1 through 30, and a maximum of 20 ports could be configured as breakout ports. |
|
Multicast filtering |
Beginning with Cisco APIC Release 5.0(1), the multicast filtering feature is now available, which allows you to filter multicast traffic from two directions: source filtering at the first-hop route and receiver filtering at the last-hop route. |
Cisco APIC Layer 3 Networking Configuration Guide |