New and Changed Information
The following table provides an overview of the significant changes to this guide up to this current release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to this release.
|
Cisco APIC Release Version |
Feature |
Description |
|---|---|---|
|
4.1(1i) |
Support for local SPAN with port-channels as the destination, as long as the sources and the port-channel are local on the same switch. |
Configuring SPAN for Traffic Monitoring |
|
You no longer have to include the IP prefix of the Layer 3 interface when configuring source SPAN with Layer 3 interface filtering. |
Configuring SPAN for Traffic Monitoring | |
|
Support for configuring filter groups, with flow entries that are used to filter the traffic, and associating them to SPAN source groups. |
Configuring SPAN for Traffic Monitoring | |
|
SPAN-on-drop, which captures packets that are droped due to forwarding at the ingress in the ASIC and sends them to a pre-configured SPAN destination. This feature is configured using CLI, the REST API, and the GUI. |
Creating a SPAN Session Using the Cisco APIC Troubleshooting CLI |
Feedback