Cisco APIC REST API User Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 16, 2015

Chapter: Configuring the Communication Policy

Configuring HTTP and HTTPS Using the GUI

Configuring the Communication Policy

Configuring HTTP and HTTPS Using the GUI

Configuring HTTP and HTTPS Using the GUI

This procedure configures the supported communication protocol for access to the GUI and the REST API.

By default, only HTTPS is enabled. HTTP or HTTP-to-HTTPS redirection, if desired, must be explicitly enabled and configured. HTTP and HTTPS can coexist.

Procedure

Step 1	On the menu bar, click FABRIC > Fabric Policies.
Step 2	In the Navigation pane, expand Pod Policies > Policies > Communication.
Step 3	Under Communication, click the default policy.
Step 4	In the Work pane, in the HTTP or HTTPS areas, enable or disable the protocol by selecting the desired state from the Admin State drop-down list.
Step 5	In the HTTP area, enable or disable HTTP-to-HTTPS redirection by selecting the desired state from the Redirect drop-down list.
Step 6	Click Submit.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)