Cisco ACI Multi-Site Fundamentals Guide, Release 1.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco ACI Multi-Site Fundamentals Guide, Release 1.x

Chapter Title

New and Changed Information

Results

Updated:
October 9, 2017

Chapter: New and Changed Information

New and Changed Information

This chapter contains the following sections:

New and Changed Information

The following table provides an overview of the significant changes to this guide up to this current release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to this release.

Table 1. New Features and Changed Behavior in the Cisco ACI Multi-Site Fundamentals Guide

Cisco ACI Multi-Site Version

Feature

Description

Where Documented

1.2(1)

Cisco ACI Multi-Site Service Integration

Added support for Layer 4 to Layer 7 service graphs between endpoint groups (EPGs) that are stretched across sites.

For more information, see Multi-Site Use Cases.

1.2(1)

Cisco ACI Multi-Site Back-to-Back Spine Connectivity Across Sites Without IPN

Added support for direct connection between spines of 2 different sites without any IPN between the sites.

For more information, see Multi-Site Use Cases.

1.2(1)

Setting up Cisco ACI Multi-Site with Multipod Enabled Fabrics

Added support for setting up Cisco ACI Multi-Site with Multipod enabled fabrics.

For more information, see Multi-Site Use Cases.

1.0(2)

External EPGs

Added external EPGs, used to connect site local L3Outs, to enable communications between the EPGs in a stretched tenant and VRF.

For more information, see Multi-Site Use Cases.

1.0(1)

--

This guide was released.

--

Was this Document Helpful?

FeedbackFeedback

Contact Cisco