The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following section:
The following sections describe the summary of tasks required to install Cisco VACS:
Apply the Cisco VACS patch.
For information about applying the Cisco VACS patch, see Applying the Cisco VACS Patch to the Cisco UCS Director.
Apply or upgrade the Cisco VACS license keys through the Cisco UCS Director User Interface (UI).
For more information about installing the Cisco VACS license, see Updating the Cisco VACS License.
Set up virtual accounts in Cisco UCS Director.
For detailed information about setting up accounts, see the Cisco UCS Director Administration Guide.
Install Cisco PNSC and Cisco Nexus 1000V through the Cisco UCS Director UI.
For more information about installing these components, see Installing Cisco Prime Network Services Controller and Installing Cisco Nexus 1000V.
Add a single host to Cisco Nexus 1000V though the Cisco UCS Director UI.
For more information on adding hosts, see Adding a Single Host.
Add multiple hosts at a time to Cisco Nexus 1000V though the Cisco UCS Director UI.
For more information on adding multiple hosts, see Adding Multiple Hosts.