- Index
- Preface
- Using the Command-Line Interface
- Cisco Catalyst Switch Module 3120 for HP Cisco IOS Commands - aaa accounting through reserved-only
- Cisco Catalyst Switch Module 3120 for HP Cisco IOS Commands - rmon collection through show vtp
- Cisco Catalyst Switch Module 3120 for HP Cisco IOS Commands - shutdown through vtp
- Cisco Catalyst Switch Module 3120 for HP Boot Loader Commands
- Cisco Catalyst Switch Module 3120 for HP Debug Commands
- Cisco Catalyst Switch Module 3120 for HP Show Platform Commands
- Acknowledgments for Open-Source Software
Cisco Catalyst Blade Switch 3120 for HP Command Reference, Release 12.2(55)SE
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 20, 2015
Chapter: Index
A -
B -
C -
D -
E -
F -
G -
H -
I -
J -
L -
M -
N -
O -
P -
Q -
R -
S -
T -
U -
V -
MSTP (continued)
policy maps (continued)
QoS (continued)
VTP (continued)
Index
A
aaa accounting dot1x command 2-1
aaa authentication dot1x command 2-3
aaa authorization network command 2-5, 2-24, 2-30, 2-32, 2-34, 2-36, 2-38, 2-144, 2-312, 2-480, B-7, B-31
AAA methods 2-3
access control entries
access control lists
access groups
IP 2-195
MAC, displaying 2-607
access list, IPv6 2-269
access map configuration mode 2-338
access mode 2-799
access ports 2-799
ACLs
deny 2-126
displaying 2-462
for non-IP protocols 2-316
IP 2-195
matching 2-338
on Layer 2 interfaces 2-195
permit 2-413
action command 2-6
aggregate-port learner 2-402
allowed VLANs 2-819
archive copy-sw command 2-8
archive download-sw command 2-11
archive tar command 2-15
archive upload-sw command 2-18
arp (boot loader) command A-2
arp access-list command 2-20
authentication command disable-port ignore 2-23
authentication control-direction command 2-24
authentication event command 2-26
authentication failed VLAN
authentication fallback command 2-30
authentication host-mode command 2-32
authentication mac-move permit command 2-34
authentication open command 2-36
authentication order command 2-38
authentication periodic command 2-40
authentication port-control command 2-42
authentication priority command 2-44
authentication timer command 2-46
authentication violation command 2-48
auth-fail max-attempts
See dot1x auth-fail max-attempts
auth-fail vlan
auth open command 2-36
auth order command 2-38
authorization state of controlled port 2-161
auth timer command 2-46
autonegotiation of duplex mode 2-172
auto qos classify command 2-50
auto qos trust command 2-53
auto qos video command 2-56
auto qos voip command 2-59
B
BackboneFast, for STP 2-721
backup interfaces
configuring 2-793
displaying 2-529
boot (boot loader) command A-3
boot auto-copy-sw command 2-66
boot auto-download-sw command 2-68
boot config-file command 2-71
boot enable-break command 2-72
boot helper command 2-73
boot helper-config file command 2-74
booting
Cisco IOS image 2-77
displaying environment variables 2-475
interrupting 2-72
manually 2-75
boot loader
accessing A-1
booting
Cisco IOS image A-3
helper image 2-73
directories
creating A-19
displaying a list of A-8
removing A-23
displaying
available commands A-13
memory heap utilization A-14
version A-30
environment variables
described A-24
displaying settings A-24
location of A-25
setting A-24
unsetting A-28
files
copying A-6
deleting A-7
displaying a list of A-8
displaying the contents of A-5, A-20, A-27
renaming A-21
file system
formatting A-11
initializing flash A-10
running a consistency check A-12
prompt A-1
resetting the system A-22
boot manual command 2-75
boot private-config-file command 2-76
boot system command 2-77
BPDU filtering, for spanning tree 2-722, 2-756
BPDU guard, for spanning tree 2-724, 2-756
broadcast storm control 2-777
C
cat (boot loader) command A-5
CDP, enabling protocol tunneling for 2-295
channel-group command 2-79
channel-protocol command 2-83
Cisco IP camera
auto-QoS configuration 2-56
Cisco SoftPhone
auto-QoS configuration 2-59
trusting packets sent from 2-379
Cisco Telepresence System
auto-QoS configuration 2-56
CISP
See Client Information Signalling Protocol
cisp
debug platform cisp command B-31
cisp enable command 2-84
class command 2-85
class-map command 2-88
class maps
creating 2-88
defining the match criteria 2-340
displaying 2-481
class of service
clear dot1x command 2-90
clear eap command 2-91
clear errdisable interface 2-92
clear ip arp inspection log command 2-93
clear ip arp inspection statistics command 2-94
clear ipc command 2-99
clear ip dhcp snooping database command 2-95, 2-97
clear ipv6 dhcp conflict command 2-100
clear l2protocol-tunnel counters command 2-101
clear lacp command 2-102
clear logging command 2-103
clear mac address-table command 2-104, 2-105
clear nmsp statistics command 2-106
clear pagp command 2-107
clear port-security command 2-108
clear spanning-tree counters command 2-110
clear spanning-tree detected-protocols command 2-111
clear vmps statistics command 2-112
clear vtp counters command 2-113
Client Information Signalling Protocol 2-84, 2-144, 2-480, B-7, B-31
command modes defined 1-2
configuration files
password recovery disable considerations A-1
specifying the name 2-71, 2-76
configuring multiple interfaces 2-191
config-vlan mode
commands 2-843
entering 2-842
copy (boot loader) command A-6
copy logging onboard command 2-114
CoS
assigning default value to incoming packets 2-349
assigning to Layer 2 protocol packets 2-298
overriding the incoming value 2-349
CoS-to-DSCP map 2-353
CPU ASIC statistics, displaying 2-482
crashinfo files 2-182
critical VLAN 2-27
D
debug authentication B-2
debug auto qos command B-4
debug backup command B-6
debug cisp command B-7
debug dot1x command B-8
debug dtp command B-9
debug eap command B-10
debug etherchannel command B-11
debug fastethernet command B-12
debug interface command B-15
debug ip dhcp snooping command B-13
debug ip igmp filter command B-16
debug ip igmp max-groups command B-17
debug ip igmp snooping command B-18
debug ip verify source packet command B-14
debug lacp command B-19
debug lldp packets command B-20
debug mac-notification command B-21
debug matm command B-22
debug matm move update command B-23
debug monitor command B-24
debug mvrdbg command B-25
debug nmsp command B-26
debug nvram command B-27
debug pagp command B-28
debug platform acl command B-29
debug platform backup interface command B-30
debug platform cisp command B-31
debug platform cli-redirection main command B-32
debug platform configuration command B-33
debug platform cpu-queues command B-34
debug platform device-manager command B-36
debug platform dot1x command B-37
debug platform etherchannel command B-38
debug platform fallback-bridging command B-39
debug platform ip arp inspection command B-40
debug platform ipc command B-49
debug platform ip dhcp command B-41
debug platform ip igmp snooping command B-42
debug platform ip multicast command B-44
debug platform ip unicast command B-46
debug platform ip wccp command B-48
debug platform led command B-50
debug platform matm command B-51
debug platform messaging application command B-52
debug platform phy command B-53
debug platform pm command B-55
debug platform port-asic command B-57
debug platform port-security command B-58
debug platform qos-acl-tcam command B-59
debug platform remote-commands command B-60
debug platform resource-manager command B-61
debug platform snmp command B-62
debug platform span command B-63
debug platform stack-manager command B-64
debug platform supervisor-asic command B-65
debug platform sw-bridge command B-66
debug platform tcam command B-67
debug platform udld command B-70
debug platform vlan command B-71
debug pm command B-72
debug port-security command B-74
debug qos-manager command B-75
debug spanning-tree backbonefast command B-78
debug spanning-tree bpdu command B-79
debug spanning-tree bpdu-opt command B-80
debug spanning-tree command B-76
debug spanning-tree mstp command B-81
debug spanning-tree switch command B-83
debug spanning-tree uplinkfast command B-85
debug sw-vlan command B-86
debug sw-vlan ifs command B-88
debug sw-vlan notification command B-89
debug sw-vlan vtp command B-91
debug udld command B-93
debug vqpc command B-95
define interface-range command 2-116
delete (boot loader) command A-7
delete command 2-118
deny (ARP access-list configuration) command 2-119
deny (IPv6) command 2-121
deny command 2-126
detect mechanism, causes 2-174
DHCP snooping
accepting untrusted packets from edge switch 2-227
enabling
on a VLAN 2-233
trust on an interface 2-231
error recovery timer 2-178
rate limiting 2-230
DHCP snooping binding database
binding file, configuring 2-223
bindings
adding 2-221
deleting 2-221
displaying 2-551
clearing database agent statistics 2-95, 2-97
database agent, configuring 2-223
displaying
binding entries 2-551
database agent status 2-553, 2-555
renewing 2-442
dir (boot loader) command A-8
directories, deleting 2-118
domain name, VTP 2-861
dot1x auth-fail max-attempts 2-138
dot1x auth-fail vlan 2-140
dot1x command 2-136
dot1x control-direction command 2-142
dot1x credentials (global configuration) command 2-144
dot1x critical global configuration command 2-145
dot1x critical interface configuration command 2-147
dot1x default command 2-149
dot1x fallback command 2-150
dot1x guest-vlan command 2-151
dot1x host-mode command 2-153
dot1x initialize command 2-154
dot1x mac-auth-bypass command 2-155
dot1x max-reauth-req command 2-157
dot1x max-req command 2-159
dot1x pae command 2-160
dot1x port-control command 2-161
dot1x re-authenticate command 2-163
dot1x reauthentication command 2-164
dot1x supplicant force-multicast command 2-165
dot1x timeout command 2-166
dot1x violation-mode command 2-169
dropping packets, with ACL matches 2-6
drop threshold, Layer 2 protocol tunneling 2-295
DSCP-to-CoS map 2-353
DSCP-to-DSCP-mutation map 2-353
DTP 2-800
DTP flap
error detection for 2-174
error recovery timer 2-178
DTP negotiation 2-804
dual IPv4 and IPv6 templates 2-408
duplex command 2-171
dynamic-access ports
configuring 2-789
restrictions 2-790
dynamic ARP inspection
ARP ACLs
apply to a VLAN 2-203
define 2-20
deny packets 2-119
display 2-466
permit packets 2-406
clear
log buffer 2-93
statistics 2-94
display
ARP ACLs 2-466
configuration and operating state 2-546
log buffer 2-546
statistics 2-546
trust state and rate limit 2-546
enable per VLAN 2-213
error detection for 2-174
error recovery timer 2-178
log buffer
clear 2-93
configure 2-207
display 2-546
rate-limit incoming ARP packets 2-205
statistics
clear 2-94
display 2-546
trusted interface state 2-209
type of packet logged 2-214
validation checks 2-211
dynamic auto VLAN membership mode 2-799
dynamic desirable VLAN membership mode 2-799
Dynamic Host Configuration Protocol (DHCP)
Dynamic Trunking Protocol
E
EAP-request/identity frame
maximum number to send 2-159
response time before retransmitting 2-166
encapsulation methods 2-819
environment variables, displaying 2-475
epm access-control open 2-173
errdisable detect cause command 2-174
errdisable detect cause small-frame comand 2-176
errdisable recovery cause small-frame 2-181
errdisable recovery command 2-178
error conditions, displaying 2-517
error disable detection 2-174
error-disabled interfaces, displaying 2-529
EtherChannel
assigning Ethernet interface to channel group 2-79
creating port-channel logical interface 2-189
debug EtherChannel/PAgP, display B-11
debug platform-specific events, display B-38
displaying 2-520
enabling Layer 2 protocol tunneling for
LACP 2-296
PAgP 2-296
UDLD 2-296
interface information, displaying 2-529
LACP
clearing channel-group information 2-102, 2-103
debug messages, display B-19
displaying 2-592
modes 2-79
port priority for hot-standby ports 2-299
restricting a protocol 2-83
system priority 2-301
load-distribution methods 2-423
PAgP
aggregate-port learner 2-402
clearing channel-group information 2-107
debug messages, display B-28
displaying 2-658
error detection for 2-174
error recovery timer 2-178
learn method 2-402
modes 2-79
physical-port learner 2-402
priority of interface for transmitted traffic 2-404
Ethernet controller, internal register display 2-484, 2-491
Ethernet Management port, debugging B-12
Ethernet statistics, collecting 2-445
exception crashinfo command 2-182, 2-187
extended-range VLANs
and allowed VLAN list 2-819
and pruning-eligible list 2-819
configuring 2-842
extended system ID for STP 2-730
F
fallback profile command 2-183
fallback profiles, displaying 2-523
fan information, displaying 2-513
file name, VTP 2-861
files, deleting 2-118
flash_init (boot loader) command A-10
flexible authentication ordering 2-38
Flex Links
configuring 2-793
displaying 2-529
flowcontrol command 2-185
format (boot loader) command A-11
forwarding packets, with ACL matches 2-6
forwarding results, display C-7
frame forwarding information, displaying C-7
front-end controller counter and status information C-9
fsck (boot loader) command A-12
G
global configuration mode 1-2, 1-4
H
hardware ACL statistics 2-462
health monitoring diagnostic tests 2-129
help (boot loader) command A-13
hierarchical policy maps 2-421
host connection, port configuration 2-798
host ports, private VLANs 2-802
I
IEEE 802.1Q trunk ports and native VLANs 2-852
IEEE 802.1Q tunnel ports
configuring 2-799
displaying 2-503
limitations 2-800
IEEE 802.1x
and switchport modes 2-800
violation error recovery 2-178
See also port-based authentication
IGMP filters
applying 2-236
debug messages, display B-16
IGMP groups, setting maximum 2-238
IGMP maximum groups, debugging B-17
IGMP profiles
creating 2-240
displaying 2-558
IGMP snooping
adding ports as a static member of a group 2-256
displaying 2-559, 2-564, 2-566
enabling 2-242
enabling the configurable-leave timer 2-244
enabling the Immediate-Leave feature 2-253
flooding query count 2-250
interface topology change notification behavior 2-252
multicast table 2-562
querier 2-246
query solicitation 2-250
report suppression 2-248
switch topology change notification behavior 2-250
images
Immediate-Leave processing
IGMP 2-253
IPv6 2-291
MVR 2-389
interface configuration mode 1-2, 1-4
interface port-channel command 2-189
interface range command 2-191
interface-range macros 2-116
interfaces
assigning Ethernet interface to channel group 2-79
configuring 2-171
configuring multiple 2-191
creating port-channel logical 2-189
debug messages, display B-15
disabling 2-707
displaying the MAC address table 2-619
restarting 2-707
interface speed, configuring 2-767
interface vlan command 2-193
internal registers, displaying 2-484, 2-491, 2-494
Internet Group Management Protocol
invalid GBIC
error detection for 2-174
error recovery timer 2-178
ip access-group command 2-195
ip address command 2-198
IP addresses, setting 2-198
IP address matching 2-338
ip admission command 2-200
ip admission name proxy http command 2-201
ip arp inspection filter vlan command 2-203
ip arp inspection limit command 2-205
ip arp inspection log-buffer command 2-207
ip arp inspection trust command 2-209
ip arp inspection validate command 2-211
ip arp inspection vlan command 2-213
ip arp inspection vlan logging command 2-214
ip device tracking command 2-216
ip device tracking probe command 2-218
IP DHCP snooping
ip dhcp snooping binding command 2-221
ip dhcp snooping command 2-220
ip dhcp snooping database command 2-223
ip dhcp snooping information option allow-untrusted command 2-227
ip dhcp snooping information option command 2-225
ip dhcp snooping information option format remote-id command 2-229
ip dhcp snooping limit rate command 2-230
ip dhcp snooping trust command 2-231
ip dhcp snooping verify command 2-232
ip dhcp snooping vlan command 2-233
ip dhcp snooping vlan information option format-type circuit-id string command 2-234
ip igmp filter command 2-236
ip igmp max-groups command 2-238, 2-263, 2-265
ip igmp profile command 2-240
ip igmp snooping command 2-242
ip igmp snooping last-member-query-interval command 2-244
ip igmp snooping querier command 2-246
ip igmp snooping report-suppression command 2-248
ip igmp snooping tcn command 2-250
ip igmp snooping tcn flood command 2-252
ip igmp snooping vlan immediate-leave command 2-253
ip igmp snooping vlan mrouter command 2-254
ip igmp snooping vlan static command 2-256
IP multicast addresses 2-386
IP phones
auto-QoS configuration 2-59
trusting packets sent from 2-379
IP-precedence-to-DSCP map 2-353
ip snap forwarding command 2-258
ip source binding command 2-259
IP source guard
disabling 2-267
displaying
binding entries 2-568
configuration 2-570
dynamic binding entries only 2-551
enabling 2-267
static IP source bindings 2-259
ip ssh command 2-261
IPv6 access list, deny conditions 2-121
ipv6 access-list command 2-269
ipv6 address dhcp command 2-271
ipv6 dhcp client request vendor command 2-272
ipv6 dhcp ping packets command 2-273
ipv6 dhcp pool command 2-275
ipv6 dhcp server command 2-277
ipv6 mld snooping command 2-279
ipv6 mld snooping last-listener-query count command 2-281
ipv6 mld snooping last-listener-query-interval command 2-283
ipv6 mld snooping listener-message-suppression command 2-285
ipv6 mld snooping robustness-variable command 2-287
ipv6 mld snooping tcn command 2-289
ipv6 mld snooping vlan command 2-291
IPv6 SDM template 2-446
ipv6 traffic-filter command 2-293
ip verify source command 2-267
J
jumbo frames
L
l2protocol-tunnel command 2-295
l2protocol-tunnel cos command 2-298
LACP
lacp port-priority command 2-299
lacp system-priority command 2-301
Layer 2 mode, enabling 2-787
Layer 2 protocol ports, displaying 2-589
Layer 2 protocol-tunnel
error detection for 2-174
error recovery timer 2-178
Layer 2 protocol tunnel counters 2-101
Layer 2 protocol tunneling error recovery 2-296
Layer 2 traceroute
IP addresses 2-833
MAC addresses 2-830
Layer 3 mode, enabling 2-787
line configuration mode 1-3, 1-5
Link Aggregation Control Protocol
link flap
error detection for 2-174
error recovery timer 2-178
link state group command 2-303
link state track command 2-305
load-distribution methods for EtherChannel 2-423
location (global configuration) command 2-306
location (interface configuration) command 2-308
logging file command 2-310
logical interface 2-189
loopback error
detection for 2-174
recovery timer 2-178
loop guard, for spanning tree 2-732, 2-736
M
mab request format attribute 32 command 2-312
mac access-group command 2-314
MAC access-groups, displaying 2-607
MAC access list configuration mode 2-316
mac access-list extended command 2-316
MAC access lists 2-126
MAC addresses
disabling MAC address learning per VLAN 2-319
displaying
aging time 2-613
all 2-611
dynamic 2-617
MAC address-table move updates 2-622
notification settings 2-621, 2-624
number of addresses in a VLAN 2-615
per interface 2-619
per VLAN 2-628
static 2-626
static and dynamic entries 2-609
dynamic
aging time 2-318
deleting 2-104
displaying 2-617
enabling MAC address notification 2-323
enabling MAC address-table move update 2-321
matching 2-338
persistent stack 2-775
static
adding and removing 2-325
displaying 2-626
dropping on an interface 2-326
tables 2-611
MAC address notification, debugging B-21
mac address-table aging-time 2-314, 2-338
mac address-table aging-time command 2-318
mac address-table learning command 2-319
mac address-table move update command 2-321
mac address-table notification command 2-323
mac address-table static command 2-325
mac address-table static drop command 2-326
MAC frames
macro apply command 2-328
macro description command 2-331
macro global command 2-332
macro global description command 2-335
macro name command 2-336
macros
adding a description 2-331
adding a global description 2-335
applying 2-332
creating 2-336
displaying 2-660
specifying parameter values 2-332
tracing 2-332
maps
QoS
defining 2-353
displaying 2-638
VLAN
creating 2-849
defining 2-338
displaying 2-697
match (access-map configuration) command 2-338
match (class-map configuration) command 2-340
maximum transmission unit
mdix auto command 2-343
memory (boot loader) command A-14
mgmt_clr (boot loader) command A-16
mgmt_init (boot loader) command A-17, A-18
mkdir (boot loader) command A-19
MLD snooping
configuring queries 2-281, 2-283
configuring topology change notification 2-289
displaying 2-579, 2-581, 2-583, 2-585
enabling 2-279
enabling on a VLAN 2-291
mls qos aggregate-policer command 2-347
mls qos command 2-345
mls qos cos command 2-349
mls qos dscp-mutation command 2-351
mls qos map command 2-353
mls qos queue-set output buffers command 2-357
mls qos queue-set output threshold command 2-359
mls qos rewrite ip dscp command 2-361
mls qos srr-queue input bandwidth command 2-363
mls qos srr-queue input buffers command 2-365
mls qos-srr-queue input cos-map command 2-367
mls qos srr-queue input dscp-map command 2-369
mls qos srr-queue input priority-queue command 2-371
mls qos srr-queue input threshold command 2-373
mls qos-srr-queue output cos-map command 2-375
mls qos srr-queue output dscp-map command 2-377
mls qos trust command 2-379
mls qos vlan-based command 2-381
mode, MVR 2-386
Mode button, and password recovery 2-449
modes, commands 1-2
monitor session command 2-382
more (boot loader) command A-20
MSTP
displaying 2-674
interoperability 2-111
link type 2-734
MST region
aborting changes 2-740
applying changes 2-740
configuration name 2-740
configuration revision number 2-740
current or pending display 2-740
displaying 2-674
MST configuration mode 2-740
VLANs-to-instance mapping 2-740
path cost 2-742
protocol mode 2-738
restart protocol migration process 2-111
root port
loop guard 2-732
preventing from becoming designated 2-732
restricting which can be root 2-732
root guard 2-732
root switch
affects of extended system ID 2-730
interval between BDPU messages 2-746
interval between hello BPDU messages 2-745, 2-752
max-age 2-746
maximum hop count before discarding BPDU 2-747
port priority for selection of 2-748
primary or secondary 2-752
switch priority 2-751
state changes
blocking to forwarding state 2-759
enabling BPDU filtering 2-722, 2-756
enabling BPDU guard 2-724, 2-756
enabling Port Fast 2-756, 2-759
forward-delay time 2-744
length of listening and learning states 2-744
rapid transition to forwarding 2-734
shutting down Port Fast-enabled ports 2-756
state information display 2-673
MTU
configuring size 2-827
displaying global setting 2-686
Multicase Listener Discovery
multicast group address, MVR 2-389
multicast groups, MVR 2-387
Multicast Listener Discovery
multicast router learning method 2-254
multicast router ports, configuring 2-254
multicast router ports, IPv6 2-291
multicast storm control 2-777
multicast VLAN, MVR 2-386
multicast VLAN registration
multiple hosts on authorized port 2-153
Multiple Spanning Tree Protocol
MVR
configuring 2-386
configuring interfaces 2-389
debug messages, display B-25
displaying 2-647
displaying interface information 2-649
members, displaying 2-651
mvr (global configuration) command 2-386
mvr (interface configuration) command 2-389
mvr vlan group command 2-390
N
native VLANs 2-819
native VLAN tagging 2-852
network-policy (global configuration) command 2-392
network-policy command 2-391
network-policy profile (network-policy configuration) command 2-393
nmsp attachment suppress command 2-396
nmsp command 2-395
no authentication logging verbose 2-397
no dot1x logging verbose 2-398
no mab logging verbose 2-399
nonegotiate
DTP messaging 2-804
speed 2-767
non-IP protocols
denying 2-126
forwarding 2-413
non-IP traffic access lists 2-316
non-IP traffic forwarding
denying 2-126
permitting 2-413
non-stop forwarding 2-400
normal-range VLANs 2-842, 2-848
no vlan command 2-842
nsf command 2-400
O
online diagnostics
configuring health monitoring diagnostic tests 2-129
displaying
configured boot-up coverage level 2-498
current scheduled tasks 2-498
event logs 2-498
supported test suites 2-498
test ID 2-498
test results 2-498
test statistics 2-498
enabling
scheduling 2-131
syslog messages 2-129
global configuration mode
clearing health monitoring diagnostic test schedule 2-129
clearing test-based testing schedule 2-131
setting health monitoring diagnostic testing 2-129
setting test-based testing 2-131
setting up health monitoring diagnostic test schedule 2-129
setting up test-based testing 2-131
removing scheduling 2-131
scheduled switchover
disabling 2-131
enabling 2-131
setting test interval 2-131
specifying health monitoring diagnostic tests 2-129
starting testing 2-133
P
PAgP
pagp learn-method command 2-402
pagp port-priority command 2-404
password, VTP 2-862
password-recovery mechanism, enabling and disabling 2-449
permit (ARP access-list configuration) command 2-406
permit (IPv6) command 2-408
permit (MAC access-list configuration) command 2-413
per-VLAN spanning-tree plus
physical-port learner 2-402
PID, displaying 2-545
PIM-DVMRP, as multicast router learning method 2-254
police aggregate command 2-418
police command 2-416
policed-DSCP map 2-353
policy-map command 2-420
policy maps
applying to an interface 2-451, 2-457
creating 2-420
displaying 2-663
hierarchical 2-421
policers
displaying 2-631
for a single class 2-416
for multiple classes 2-347, 2-418
policed-DSCP map 2-353
traffic classification
defining the class 2-85
defining trust states 2-835
setting DSCP or IP precedence values 2-455
Port Aggregation Protocol
port-based authentication
AAA method list 2-3
configuring violation modes 2-169
debug messages, display B-8
enabling guest VLAN supplicant 2-139, 2-150
enabling IEEE 802.1x
globally 2-136
per interface 2-161
guest VLAN 2-151
host modes 2-153
IEEE 802.1x AAA accounting methods 2-1
initialize an interface 2-154
MAC authentication bypass 2-155
manual control of authorization state 2-161
multiple hosts on authorized port 2-153
PAE as authenticator 2-160
periodic re-authentication
enabling 2-164
time between attempts 2-166
quiet period between failed authentication exchanges 2-166
re-authenticating IEEE 802.1x-enabled ports 2-163
resetting configurable IEEE 802.1x parameters 2-149
switch-to-authentication server retransmission time 2-166
switch-to-client frame-retransmission number2-157to 2-159
switch-to-client retransmission time 2-166
port-channel load-balance command 2-423
Port Fast, for spanning tree 2-759
port ranges, defining 2-114, 2-116
ports, debugging B-72
ports, protected 2-817
port security
aging 2-811
debug messages, display B-74
enabling 2-806
violation error recovery 2-178
port trust states for QoS 2-379
port types, MVR 2-389
power information, displaying 2-513
priority-queue command 2-425
priority value, stack member 2-681, 2-782
private-vlan command 2-427
private-vlan mapping command 2-430
private VLANs
association 2-815
configuring 2-427
configuring ports 2-802
displaying 2-692
host ports 2-802
mapping
configuring 2-815
displaying 2-529
promiscuous ports 2-802
product identification information, displaying 2-545
promiscuous ports, private VLANs 2-802
protected ports, displaying 2-536
pruning
VLANs 2-819
VTP
displaying interface information 2-529
enabling 2-862
pruning-eligible VLAN list 2-821
PVST+
Q
QoS
auto-QoS
configuring 2-59
debug messages, display B-4
displaying 2-471
auto-QoS trust
configuring 2-53
auto-QoS video
configuring 2-56
class maps
creating 2-88
defining the match criteria 2-340
displaying 2-481
defining the CoS value for an incoming packet 2-349
displaying configuration information 2-471, 2-630
DSCP transparency 2-361
DSCP trusted ports
applying DSCP-to-DSCP-mutation map to 2-351
defining DSCP-to-DSCP-mutation map 2-353
egress queues
allocating buffers 2-357
defining the CoS output queue threshold map 2-375
defining the DSCP output queue threshold map 2-377
displaying buffer allocations 2-634
displaying CoS output queue threshold map 2-638
displaying DSCP output queue threshold map 2-638
displaying queueing strategy 2-634
displaying queue-set settings 2-641
enabling bandwidth shaping and scheduling 2-771
enabling bandwidth sharing and scheduling 2-773
limiting the maximum output on a port 2-769
mapping a port to a queue-set 2-432
mapping CoS values to a queue and threshold 2-375
mapping DSCP values to a queue and threshold 2-377
setting maximum and reserved memory allocations 2-359
setting WTD thresholds 2-359
enabling 2-345
ingress queues
allocating buffers 2-365
assigning SRR scheduling weights 2-363
defining the CoS input queue threshold map 2-367
defining the DSCP input queue threshold map 2-369
displaying buffer allocations 2-634
displaying CoS input queue threshold map 2-638
displaying DSCP input queue threshold map 2-638
displaying queueing strategy 2-634
displaying settings for 2-632
enabling the priority queue 2-371
mapping CoS values to a queue and threshold 2-367
mapping DSCP values to a queue and threshold 2-369
setting WTD thresholds 2-373
maps
defining 2-353, 2-367, 2-369, 2-375, 2-377
displaying 2-638
policy maps
applying an aggregate policer 2-418
applying to an interface 2-451, 2-457
creating 2-420
defining policers 2-347, 2-416
displaying policers 2-631
displaying policy maps 2-663
hierarchical 2-421
policed-DSCP map 2-353
setting DSCP or IP precedence values 2-455
traffic classifications 2-85
trust states 2-835
port trust states 2-379
queues, enabling the expedite 2-425
statistics
in-profile and out-of-profile packets 2-634
packets enqueued or dropped 2-634
sent and received CoS values 2-634
sent and received DSCP values 2-634
trusted boundary for IP phones 2-379
VLAN-based 2-381
quality of service
querytime, MVR 2-386
queue-set command 2-432
R
radius-server dead-criteria command 2-433
radius-server host command 2-435
rapid per-VLAN spanning-tree plus
rapid PVST+
re-authenticating IEEE 802.1x-enabled ports 2-163
re-authentication
periodic 2-164
time between attempts 2-166
receiver ports, MVR 2-389
receiving flow-control packets 2-185
recovery mechanism
causes 2-178
display 2-92, 2-478, 2-515, 2-518
timer interval 2-179
reload command 2-437
remote command 2-439
remote-span command 2-440
Remote Switched Port Analyzer
rename (boot loader) command A-21
renew ip dhcp snooping database command 2-442
reset (boot loader) command A-22
resource templates, displaying 2-668
restricted VLAN
rmdir (boot loader) command A-23
rmon collection stats command 2-445
root guard, for spanning tree 2-732
routed ports
IP addresses on 2-199
number supported 2-199
routing frames
RSPAN
configuring 2-382
displaying 2-644
filter RSPAN traffic 2-382
remote-span command 2-440
sessions
add interfaces to 2-382
displaying 2-644
start new 2-382
S
scheduled switchover
disabling 2-131
enabling 2-131
SDM mismatch mode 2-447, 2-682
sdm prefer command 2-446
SDM templates
allowed resources 2-447
and stacking 2-447
displaying 2-668
dual IPv4 and IPv6 2-446
secure ports, limitations 2-808
sending flow-control packets 2-185
service password-recovery command 2-449
service-policy command 2-451
session command 2-454
set (boot loader) command A-24
set command 2-455
setup command 2-457
setup express command 2-460
show access-lists command 2-462
show archive status command 2-465
show arp access-list command 2-466
show authentication command 2-467
show auto qos command 2-471
show boot command 2-475
show cable-diagnostics tdr command 2-478
show cisp command 2-480
show class-map command 2-481
show controllers cpu-interface command 2-482
show controllers ethernet-controller command 2-484
show controllers ethernet-controller fastethernet command 2-491
show controllers tcam command 2-494
show controller utilization command 2-496
show dot1q-tunnel command 2-503
show dot1x command 2-504
show dtp 2-508
show eap command 2-510
show env command 2-513
show errdisable detect command 2-515
show errdisable flap-values command 2-517
show errdisable recovery command 2-518
show etherchannel command 2-520
show fallback profile command 2-523
show flowcontrol command 2-525
show idprom command 2-527
show interfaces command 2-529
show interfaces counters command 2-542
show inventory command 2-545
show ip arp inspection command 2-546
show ipc command 2-572
show ip dhcp snooping binding command 2-551
show ip dhcp snooping command 2-550
show ip dhcp snooping database command 2-553, 2-555
show ip igmp profile command 2-558
show ip igmp snooping address command 2-581
show ip igmp snooping command 2-559, 2-579
show ip igmp snooping groups command 2-562
show ip igmp snooping mrouter command 2-564, 2-583
show ip igmp snooping querier command 2-566, 2-585
show ip source binding command 2-568
show ipv6 access-list command 2-576
show ipv6 dhcp conflict command 2-578
show ipv6 route updated 2-587
show ip verify source command 2-570
show l2protocol-tunnel command 2-589
show lacp command 2-592
show link state group command 2-596
show lldp command 2-598
show location 2-599
show location command 2-599
show logging command 2-602
show mac access-group command 2-607
show mac address-table address command 2-611
show mac address-table aging time command 2-613
show mac address-table command 2-609
show mac address-table count command 2-615
show mac address-table dynamic command 2-617
show mac address-table interface command 2-619
show mac address-table learning command 2-621
show mac address-table move update command 2-622
show mac address-table notification command 2-105, 2-624, B-23
show mac address-table static command 2-626
show mac address-table vlan command 2-628
show mls qos aggregate-policer command 2-631
show mls qos command 2-630
show mls qos input-queue command 2-632
show mls qos interface command 2-634
show mls qos maps command 2-638
show mls qos queue-set command 2-641
show mls qos vlan command 2-643
show monitor command 2-644
show mvr command 2-647
show mvr interface command 2-649
show mvr members command 2-651
show network-policy profile command 2-653
show nmsp command 2-655
show pagp command 2-658
show parser macro command 2-660
show platform acl command C-2
show platform backup interface command C-3
show platform configuration command C-4
show platform dl command C-5
show platform etherchannel command C-6
show platform forward command C-7
show platform frontend-controller command C-9
show platform igmp snooping command C-10
show platform ipc trace command C-18
show platform ip multicast command C-12
show platform ip unicast command C-13
show platform ipv6 unicast command C-19
show platform ip wccp command C-17
show platform layer4op command C-21
show platform mac-address-table command C-22
show platform messaging command C-23
show platform monitor command C-24
show platform mvr table command C-25
show platform pm command C-26
show platform port-asic command C-27
show platform port-security command C-32
show platform qos command C-33
show platform resource-manager command C-34
show platform snmp counters command C-36
show platform spanning-tree command C-37
show platform stack-manager command C-39
show platform stp-instance command C-38
show platform tb command C-43
show platform tcam command C-45
show platform vlan command C-48
show policy-map command 2-663
show port security command 2-665
show sdm prefer command 2-668
show setup express command 2-672
show spanning-tree command 2-673
show storm-control command 2-679
show switch command 2-681
show system mtu command 2-686
show trust command 2-835
show udld command 2-687
show version command 2-690
show vlan access-map command 2-697
show vlan command 2-692
show vlan command, fields 2-694
show vlan filter command 2-698
show vmps command 2-699
show vtp command 2-702
shutdown command 2-707
shutdown threshold, Layer 2 protocol tunneling 2-295
shutdown vlan command 2-708
small violation-rate command 2-709
Smartports macros
SNMP host, specifying 2-715
SNMP informs, enabling the sending of 2-711
snmp-server enable traps command 2-711
snmp-server host command 2-715
snmp trap mac-notification command 2-719
SNMP traps
enabling MAC address notification trap 2-719
enabling the MAC address notification feature 2-323
enabling the sending of 2-711
SoftPhone
software images
copying 2-8
deleting 2-118
downloading 2-11
uploading 2-18
software version, displaying 2-690
source ports, MVR 2-389
SPAN
configuring 2-382
debug messages, display B-24
displaying 2-644
filter SPAN traffic 2-382
sessions
add interfaces to 2-382
displaying 2-644
start new 2-382
spanning-tree backbonefast command 2-721
spanning-tree bpdufilter command 2-722
spanning-tree bpduguard command 2-724
spanning-tree cost command 2-726
spanning-tree etherchannel command 2-728
spanning-tree extend system-id command 2-730
spanning-tree guard command 2-732
spanning-tree link-type command 2-734
spanning-tree loopguard default command 2-736
spanning-tree mode command 2-738
spanning-tree mst configuration command 2-740
spanning-tree mst cost command 2-742
spanning-tree mst forward-time command 2-744
spanning-tree mst hello-time command 2-745
spanning-tree mst max-age command 2-746
spanning-tree mst max-hops command 2-747
spanning-tree mst port-priority command 2-748
spanning-tree mst pre-standard command 2-750
spanning-tree mst priority command 2-751
spanning-tree mst root command 2-752
spanning-tree portfast (global configuration) command 2-756
spanning-tree portfast (interface configuration) command 2-759
spanning-tree port-priority command 2-754
Spanning Tree Protocol
spanning-tree transmit hold-count command 2-761
spanning-tree uplinkfast command 2-762
spanning-tree vlan command 2-764
speed command 2-767
srr-queue bandwidth limit command 2-769
srr-queue bandwidth shape command 2-771
srr-queue bandwidth share command 2-773
SSH, configuring version 2-261
stack-mac persistent timer command 2-775
stack member
access 2-454
priority value 2-782
provisioning 2-783
reloading 2-437
stacks, switch
disabling a member 2-780
enabling a member 2-780
MAC address 2-775
provisioning a new member 2-783
reloading 2-437
stack member access 2-454
stack member number 2-681, 2-785
stack member priority value 2-681, 2-782
static-access ports, configuring 2-789
statistics, Ethernet group 2-445
sticky learning, enabling 2-806
storm-control command 2-777
STP
BackboneFast 2-721
counters, clearing 2-110
debug messages, display
BackboneFast events B-78
MSTP B-81
optimized BPDUs handling B-80
spanning-tree activity B-76
switch shim B-83
transmitted and received BPDUs B-79
UplinkFast B-85
detection of indirect link failures 2-721
enabling protocol tunneling for 2-295
EtherChannel misconfiguration 2-728
extended system ID 2-730
path cost 2-726
protocol modes 2-738
root port
accelerating choice of new 2-762
loop guard 2-732
preventing from becoming designated 2-732
restricting which can be root 2-732
root guard 2-732
UplinkFast 2-762
root switch
affects of extended system ID 2-730, 2-765
hello-time 2-764
interval between BDPU messages 2-764
interval between hello BPDU messages 2-764
max-age 2-764
port priority for selection of 2-754
primary or secondary 2-764
switch priority 2-764
state changes
blocking to forwarding state 2-759
enabling BPDU filtering 2-722, 2-756
enabling BPDU guard 2-724, 2-756
enabling Port Fast 2-756, 2-759
enabling timer to recover from error state 2-178
forward-delay time 2-764
length of listening and learning states 2-764
shutting down Port Fast-enabled ports 2-756
state information display 2-673
SVIs, creating 2-193
SVI status calculation 2-791
Switched Port Analyzer
switching characteristics
modifying 2-787
returning to interfaces 2-787
switchport access command 2-789
switchport autostate exclude command 2-791
switchport backup interface command 2-793
switchport block command 2-796
switchport command 2-787
switchport host command 2-798
switchport mode command 2-799
switchport mode private-vlan command 2-802
switchport nonegotiate command 2-804
switchport port-security aging command 2-811
switchport port-security command 2-806
switchport priority extend command 2-813
switchport private-vlan command 2-815
switchport protected command 2-817
switchports, displaying 2-529
switchport trunk command 2-819
switchport voice detect 2-822
switchport voice vlan command 2-823
switch priority command 2-780, 2-782
switch provision command 2-783
switch renumber command 2-785
system env temperature threshold yellow command 2-825
system message logging, save message to flash 2-310
system mtu command 2-827
system resource templates 2-446
T
tar files, creating, listing, and extracting 2-15
TDR, running 2-829
temperature information, displaying 2-513
templates, system resources 2-446
test cable-diagnostics tdr command 2-829
traceroute mac command 2-830
traceroute mac ip command 2-833
trunking, VLAN mode 2-799
trunk mode 2-799
trunk ports 2-799
trunks, to non-DTP device 2-800
trusted boundary for QoS 2-379
trusted port states for QoS 2-379
tunnel ports, Layer 2 protocol, displaying 2-589
type (boot loader) command A-27
U
UDLD
debug messages, display B-93
enable globally 2-837
enable per interface 2-839
error recovery timer 2-178
message timer 2-837
reset a shutdown interface 2-841
status 2-687
udld command 2-837
udld port command 2-839
udld reset command 2-841
unicast storm control 2-777
UniDirectional Link Detection
unknown multicast traffic, preventing 2-796
unknown unicast traffic, preventing 2-796
unset (boot loader) command A-28
upgrading
copying software images 2-8
downloading software images 2-11
software images, monitoring status of 2-465
UplinkFast, for STP 2-762
V
version (boot loader) command A-30
version mismatch mode 2-682, C-40
vlan (global configuration) command 2-842
vlan (VLAN configuration) command 2-848
vlan access-map command 2-849
VLAN access map configuration mode 2-849
VLAN access maps
actions 2-6
displaying 2-697
VLAN-based QoS 2-381
VLAN configuration
rules 2-845
saving 2-842
VLAN configuration mode
commands
VLAN 2-848
VTP 2-867
description 1-4
entering 2-851
summary 1-3
vlan database command 2-851
vlan dot1q tag native command 2-852
vlan filter command 2-854
VLAN filters, displaying 2-698
VLAN ID range 2-842
VLAN maps
applying 2-854
creating 2-849
defining 2-338
displaying 2-697
VLAN Query Protocol
VLANs
adding 2-842
debug messages, display
ISL B-89
VLAN IOS file system error tests B-88
VLAN manager activity B-86
VTP B-91
displaying configurations 2-692
extended-range 2-842
MAC addresses
displaying 2-628
number of 2-615
media types 2-845
private 2-802
configuring 2-427
displaying 2-692
restarting 2-708
saving the configuration 2-842
shutting down 2-708
SNMP traps for VTP 2-713, 2-716
suspending 2-708
VLAN Trunking Protocol
VMPS
configuring servers 2-859
displaying 2-699
error recovery timer 2-179
reconfirming dynamic VLAN assignments 2-856
vmps reconfirm (global configuration) command 2-857
vmps reconfirm (privileged EXEC) command 2-856
vmps retry command 2-858
vmps server command 2-859
voice VLAN
setting port priority 2-813
VQP
and dynamic-access ports 2-790
clearing client statistics 2-112
displaying information 2-699
per-server retry count 2-858
reconfirmation interval 2-857
reconfirming dynamic VLAN assignments 2-856
VTP
changing characteristics 2-861
clearing pruning counters 2-113
configuring
domain name 2-861
file name 2-861
mode 2-861
password 2-862
counters display fields 2-703
displaying information 2-702
enabling
pruning 2-862
tunneling for 2-295
Version 2 2-862
enabling per port 2-866
mode 2-861
pruning 2-862
saving the configuration 2-842
statistics 2-702
status 2-702
status display fields 2-705
vtp (global configuration) command 2-861
vtp (VLAN configuration) command 2-867
vtp interface configuration) command 2-866
vtp primary command 2-868
Feedback