The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Numerics
10/100/1000 ports
described 4
description 4
recommended cables 24
10-Gigabit Ethernet module slots described 4
A
accessing the device manager 24
adapter pinouts, terminal
RJ-45-to-DB-25 8
RJ-45-to-DB-9 8
autonegotiation
default setting 23
troubleshooting 4
B
blade enclosure
architecture 5
description 1
C
cable lengths 3
cables
connecting the stacking cables 16
crossover
connecting to 2
four twisted-pair pinout, 1000BASE-T ports 7
identifying 8
two twisted-pair pinout, 10/100 ports 6
recommended 24
SFP module 6
straight-through
connecting to 2
four twisted-pair pinout, 1000BASE-T ports 7
two twisted-pair pinout 6
X2 transceiver module 4
cabling
10/100/1000 ports 22
pinouts 6
See also connectors and cables
StackWise cables
cable numbers 8
connecting to 16
cautions 8
Cisco IOS command-line interface 10, 24
Cisco IP Phones, connecting to 22, 24
Cisco TwinGig Converter Module
described 4
installing 18
Class 1 laser warning 2
CLI
accessing through console port 1
command-line interface
configuration examples, network 3
connecting
the stacking cables 16
to 10/100/1000 ports 22
to console port 4
connectors and cables
console port
connecting 3
conventions, document 8
converter modules
installing and removing18to 20
crossover cable
identifying 8
pinout for four twisted-pair, 1000BASE-T ports 7
D
device manager
description 9
how to access 24
diagnosing problems 1
disposal of product warning 2
document conventions 8
duplex
default setting 23
troubleshooting 4
E
electrical codes warning 2
electrical noise, avoiding 3
Ethernet and fiber-optic cable troubleshooting 2
Ethernet cable shielding warning 2
Ethernet port connections warning 2
examples, network configuration 3
F
front panel
10/100/1000 Ethernet ports 4
10/100 /1000 ports 4
10-Gigabit Ethernet module slots 4
SFP module ports 4
H
health LED 6
I
installation
guidelines 3
prerequisites 5
requirements 3
installation instructions warning 2
installing Cisco TwinGig Converter Modules 18
installing the switch module in the blade enclosure 6
installing X2 transceiver modules 18
IP address
assigning through the Onboard Administrator 9
refreshing 13
ways to assign 8
J
jewelry removal warning 2
L
LEDs
Health 6
port 6
POST results 1
stack 5
stack master 6
stack member 6
system 5
UID 6
lightning activity warning 2
link status troubleshooting 2
M
managing the switch module
using the device manager 9, 24
using the Onboard Administrator 10
message URL http
//www.cisco.com/web/learning/index.html 7
N
network configuration examples 3
noise, electrical 3
O
Onboard Administrator
managing the switch module 10
using to assign IP address 9
overheating prevention warning 2
P
packing list 4
pinouts
adapters 8
crossover cable 8
crossover cables for four twisted-pair, 1000BASE-T ports 7
crossover cables for two twisted-pair 10/100 ports 6
RJ-45-to-DB-25 terminal adapter 9
RJ-45-to-DB-9 terminal adapter 8
SFP module ports 3
straight-through cables
four twisted-pair 1000BASE-T ports 7
two twisted-pair 6
port and interface troubleshooting 3
port LEDs 6
ports
10/100/1000 4
connecting to 23
described 4
recommended cables 24
numbering of 10/100/1000 4
StackWise ports 8
POST
LEDs 1
running at power on 1
procedures
connecting StackWise Plus cables 16
Express Setup 11
installation 6
publications, related 8
R
recommended configurations for stacking 14
requirements for installing the switch module 3
RJ-45 connector, console port 4
S
safety and handling guidelines 3
safety warnings 2
serial number location 6
SFP modules
bale-clasp latch removal 21
cables 6
connectors 3
description 4
software switch module management 8
specifications 1
speed
default setting 23
troubleshooting 4
stacking caution 13
stack LED 5
stack master
LED 6
setting 12
stack member LED 6
StackWise Plus cables
configuration examples 14
ordering 14
StackWise ports 8
straight-through cable
pinout
four twisted-pair 1000BASE-T ports 7
two twisted-pair 10/100 ports 6
switch stack
description 13
system LED 5
T
technical specifications 1
Telnet, and accessing the CLI 10, 24
temperature, operating 1
trained and qualified personnel warning 2
troubleshooting
bad or damaged cable 2
connection problems 2
diagnosing problems 1
Ethernet and fiber-optic cables 2
link status 2
ping end device 3
port and interface settings 3
POST 1
spanning-tree loops 3
speed, duplex, and autonegotiation 4
switch performance 4
TwinGig Converter Module
See Cisco TwinGig Converter Module
U
UID LED 6
unit identifier
W
warnings
Class 1 laser 2
defined 8
disposal of product 2
electrical codes 2
Ethernet cable shielding 2
Ethernet port connections 2
installation 2
installation instructions 2
jewelry removal 2
lightning activity 2
overheating prevention 2
trained and qualified personnel 2
X
X2 transceiver modules
described 4
installing 18
installing and removing18to 20
removing 19