Migrating Palo Alto Networks Firewall to Cisco Secure Firewall Threat Defense Using Firewall Migration Manager

PDF

Migrating Palo Alto Networks Firewall to Cisco Secure Firewall Threat Defense Using Firewall Migration Manager

Review the Firewall Migration Manager pre-migration report

Want to summarize with AI?

Log in

Review the pre-migration report to identify potential migration issues and understand the migration process before proceeding.


This report offers a detailed summary of the migration process, covering key aspects such as identified errors, unreferenced objects, and ignored configuration lines. We recommend that you familiarize yourself thoroughly with this report because some rules may not get migrated completely. This, in turn, could impact your original setup, restrict authorized traffic, or allow unintended traffic. We highly recommend that you refine rules and policies in Firewall Management Center to ensure optimal traffic management and system performance post-migration.

Procedure

  1. Navigate to the location where you downloaded the Pre-migration report.

    Note

    A copy of the Pre-migration report is also saved in the Resources folder in the same location as the Firewall Migration Manager.

  2. Open the Pre-migration report and carefully review its contents to identify issues, if any, that may cause the migration to fail.

    The Pre-migration report includes the following information:

    • Overall Summary—A summary of the supported configuration elements in Palo Alto Networks Firewall, which can be successfully migrated to Firewall Management Center.

      While connecting to a live Palo Alto Networks Firewall, the summary includes the hit count information, the number of times a Palo Alto Networks Firewall rule was encountered and its timestamp information.

    • Unsupported Configuration—This section displays the details of Palo Alto Networks Firewall configuration elements that are not migrated by Firewall Migration Manager. Review each item, and if required configure the equivalent manually before or after migration. Unsupported rules may alter the original configuration, restrict authorized traffic, or permit unwanted traffic if not addressed.

    • Ignored Configuration—This section displays the details of Palo Alto Networks Firewall configuration elements that are unsupported by Firewall Management Center, or not parsed by Firewall Migration Manager because they are irrelevant to the target device. Review these lines and verify whether each feature is supported in Firewall Management Center. If required, configure the features manually in Firewall Management Center.

    • Unreferenced Configuration—It displays the details of Palo Alto Networks Firewall configuration elements that are defined in the source configuration but are not used in any access-group, prefix list, VPN, or policy. These items will not be migrated. Review each item to determine whether it should be removed from source configuration or manually configured on the target device.

    For more information about the supported features in Firewall Management Center and Firewall Threat Defense, refer to Cisco Secure Firewall Management Center Device Configuration Guide.