The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter provides information about the intuVision Video Analytics apps for Cisco IP cameras. These apps enable an IP camera to trigger events when it detects activities or behaviors that match predefined rules.
The intuVision Video Analytics apps include the following:
For information about configuring the intuVision Video Analytics apps on an IP camera, see the instructions that are provided on the “Edge Analytics for Cisco Cameras” page on the intuVision website.
To run an intuVision Video Analytics app on an IP camera, perform the following steps. The IP camera can run one intuVision Video Analytics app at a time.
Step 1 From the IP camera web-based user interface, click the Setup link, click Application Manager to expand the menu, then click App Setup .
Step 2 Click one of the following radio buttons to choose the app that you want to run.
The buttons that appear on your system depend on which apps you installed.
Step 3 (Optional) If you want the Video Analytics app to run automatically each time the IP camera reboots, in the Installed Application List area, check the Start on Boot check box that corresponds to this app.
If you do not check this check box, you must run the app manually each time the IP camera reboots.
To stop an intuVision Video Analytics app on an IP camera, follow these steps:
Step 1 From the IP camera web-based user interface, click the Setup link, click Application Manager to expand the menu, then click App Setup .
Step 2 Click the radio button for the app that you want to stop: