The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco Video Surveillance 6000P High-Definition IP Camera, and includes the following topics:
The Cisco Video Surveillance 6000P IP camera offers 1080p HD resolution with superb image quality. The camera can capture a more comprehensive view than a standard VGA camera, significantly reducing the number of cameras required. It is especially suitable for monitoring wide open spaces such as building entrances, airports, or applications requiring accurate identification.
The 6000P IP camera employs many advanced features to allow users to fully enjoy the high definition video. With high performance H.264//MJPEG compression technology, it offers high-quality video in full HD @ 30fps with a minimum of bandwidth consumption.
The 6000P IP camera comes with an advanced P-Iris lens, which controls the iris opening with extreme precision at an optimal level at all times via the built-in stepper motor, resulting in superior sharpness and depth of field as well as image quality.
The 6000P IP camera features a removable IR-cut filter, maintaining clear images 24 hours a day. Also featuring a myriad of other high-end features such as SD/SDHC card slot, PoE, and multiple streams, the 6000P IP camera is indisputably the top choice for reliable and high performance megapixel surveillance.
The Cisco Video Surveillance IP Camera package includes the following items:
Figure 1-1 and the table that follows describe the front view of the IP camera.
Figure 1-1 Front View of IP Camera
Figure 1-2 and the table that follows describe the back view of the IP camera.
Figure 1-2 Back View of IP Camera
|
The top LED lights to indicate network activity and the bottom LED lights to indicate power |
|
|
||
|
Connects to an optional video monitor that has a BNC connector |
|
|
The IP camera is compliant with Micro SD/SDHC (up to 32GB) and other preceding standard SD cards. |
|
|
Connection to an optional PoE power injector if your router or switch does not support PoE |
|
|
GPIO terminal block that is used to connect external input and output devices. For more information, see Figure 1-3. |
|
|
Used in conjunction with an analog display to fine tune the IP camera focus. |
|
|
Connection for the cable from a P-iris lens. For more information, see Figure 1-4. |
|
|
Recessed button that reboots the IP camera or resets it to a default state. You can use a pin or paper clip to depress it. Depending on how long you depress the recessed reset button, you can do either of the following:
|
|
|
Accepts a standard LAN cable to connect the IP camera to a 10/100BaseT router or switch. |
|
|
Switches the microphone operation between the following options: |
|
|
||
|
Figure 1-3 shows the pin locations and descriptions.
Figure 1-3 GPIO Terminal Block Pin Locations and Descriptions
|
|
|
Figure 1-4 describes the pinouts of the P-iris lens connector on the IP camera.
Figure 1-4 P-iris Lens Connector Pinouts
|
|
---|---|
Figure 1-5 and the table that follows describe the P-iris lens for the IP camera.
|
||
|