Cisco Video Surveillance 3530 IP Camera Installation Guide
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- January 18, 2013
Chapter: Index
Index
A
About link 4-2
ActiveX controls 4-2
B
brightness 4-5
C
camera
See IP camera
Camera Video/Control window
accessing 4-4
description 4-2
displaying 4-2
connecting, to the IP camera
for the first time 3-1
PC requirements for 3-1
contrast 4-5
D
DHCP, obtaining IP address through 3-1
F
factory reset 4-4
focus/zoom
accessing controls 4-8
controls 4-8
G
GPIO terminal block 2-7
H
help, for IP camera windows 4-2
Home window
description 4-2
displaying 4-1
HTTP, allowing access through 3-2
I
installing
GPIO terminal block 2-7
IP camera 2-1
mounting to ceiling or wall 2-4
warnings 2-1
waterproof connector 2-6
IP address
default for IP camera 3-1
obtaining from DCHP server 3-1
IP camera
accessing through a web browser 3-1
connecting to for the first time 3-1
installation 2-1
GPIO terminal block 2-7
mounting to ceiling or wall 2-4
warnings 2-1
waterproof connector 2-6
logging out of 4-2
panning 4-6
powering off 4-3
powering on 4-3
tilting 4-6
windows 4-2
L
live video
viewing
through home window 4-4
through third-party device or software 4-4
See also video
log out, of IP camera 4-2
M
motion detection
accessing controls 4-6
controls 4-7
enabling 4-7
sensitivity 4-7
threshold 4-7
mounting to ceiling or wall 2-4
P
panning 4-6
password
requirements for 3-2
password, requirements for 3-2
power
adapter 2-1
powering off the IP camera 4-3
powering on the IP camera 4-3
Power over Ethernet (PoE) 2-1
Power over Ethernet (PoE) 2-1
R
rebooting, IP camera 4-4
Refresh link 4-1
reset
factory default values 4-4
reboot 4-4
S
saturation 4-5
sensitivity, for motion detection 4-7
Setup window
description 4-2
displaying 4-2
sharpness 4-5
T
terminal block 2-7
threshold, for motion detection 4-7
tilting 4-6
V
video
viewing live
through Home window 4-4
through third-party device or software 4-4
See also live video
video codec
controls in Camera Video/Control window 4-4
video image
controls in Camera Video/Control window 4-5
video resolution
controls in Camera Video/Control window 4-5
View Video link 4-2
W
warnings before installation 2-1
waterproof connector 2-6
Z
zoom
accessing controls 4-8
zoom controls 4-8
Feedback