Cisco Physical Access Gateway User Guide, Release 1.4.1
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- February 9, 2014
Chapter: Preface
Preface
This preface describes the purpose, audience, organization, obtaining documentation and submitting a service request and safety warnings of the Cisco Physical Access Gateway User Guide.
This chapter contains the following sections:
•
Obtaining Documentation and Submitting a Service Request
Purpose
This document provides information to install and configure the components located near each door of a Cisco Physical Access Control system.
Audience
This guide is intended for the Cisco Physical Access Gateway Administrators.
Organization
|
|
|
|
|---|---|---|
Chapter 1 |
This chapter gives an overview of the Cisco Physical Access Gateway. |
|
Chapter 2 |
Installing and Configuring the Cisco Physical Access Gateway |
This chapter explains the Gateway appliance, Port descrption,configuration and installation instructions and its relation with the Cisco Physical Access Manager. |
Chapter 3 |
This chapter explains the configuration and installation instructions of the Cisco Reader Module. |
|
Chapter 4 |
This chapter explains the configuration and installation instructions of the Cisco Input Module. |
|
Chapter 5 |
This chapter explains the configuration and installation instructions of the Cisco Output Module. |
|
Appendix A |
This chapter lists the environmental specifications for Cisco Physical Access gateway, Cisco Reader, Cisco Input and Cisco Output modules. |
|
Appendix B |
Lists the warnings while installing the Cisco Physical Access Gateway. |
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Safety Warnings
Before you install the device, observe the safety warnings described in "Safety Warnings".
Feedback