Download and Run the ISO Image
Before you begin
Before you install Cisco ISE-PIC on any of the supported appliances, ensure you have:
Created and accessed the virtual machine correctly.
Complied with all firmware and virtual machine requirements as follows:
Virtual Machine—install an OVA template prior to ISE-PIC installation and ensure your virtual machine server is configured correctly.
Linux KVM—ensure all virtualization technology and hardware requirements are met.
For more information about requirements, see Cisco ISE-PIC Administrator Guide, Cisco Secure Network Server Data Sheet, and Cisco Identity Services Engine Installation Guide.
Boot the virtual machine on which to install ISE-PIC.
At the boot prompt, press 2 and Enter to install Cisco ISE-PIC using a serial console.
The following message appears.
At the prompt, type setup to start the Setup program. See Run the Setup Program for details about the Setup program parameters.
After you enter the network configuration parameters in the Setup mode, the appliance automatically reboots, and returns to the shell prompt mode.
Exit from the shell prompt mode. The appliance comes up.
Continue with Verify the Installation Process.