User Guide for Cisco Secure ACS to Cisco ISE Migration Tool, Release 2.3

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

User Guide for Cisco Secure ACS to Cisco ISE Migration Tool, Release 2.3

Chapter Title

Migrate from Earlier Releases of Cisco Secure ACS to Cisco ISE

Results

Updated:
February 16, 2021

Chapter: Migrate from Earlier Releases of Cisco Secure ACS to Cisco ISE

Migrate from Earlier Releases of Cisco Secure ACS to Cisco ISE

This chapter provides detailed information on migrating data from earlier releases of Cisco Secure ACS to Cisco ISE.

Migrate from Earlier Releases of Cisco Secure ACS to Cisco ISE

You can migrate earlier releases of Cisco Secure ACS data to Cisco Secure ACS, Release 5.5 or above, so that it can be migrated to Cisco ISE, Release 2.3, using the migration tool.

Migrate from Cisco Secure ACS, Release 3.x

If you are running Cisco Secure ACS, Release 3.x in your environment, upgrade to a migration-supported version of Cisco Secure ACS, Release 4.x.

Procedure

Step 1

Check the upgrade path for Cisco Secure ACS, Release 3.x, as described in the Installation Guide for Cisco Secure ACS Solution Engine 4.2.

Step 2

Upgrade your Cisco Secure ACS, Release 3.x server to a migration-supported version of the Cisco Secure ACS, Release 4.x. For example, upgrade to one of the following Cisco Secure ACS 4.2.0.124, or Cisco Secure ACS 4.2.1 releases.

Step 3

After the upgrade, follow the steps that describe migrating from Cisco Secure ACS, Release 4.x .

Migrate from Cisco Secure ACS, Release 4.x

If you are not running one of the migration-supported versions of Cisco Secure ACS, Release 4.x in your environment, upgrade to a point where you can migrate from Cisco Secure ACS, Release 4.x to Cisco Secure ACS, Release 4.2.

Migrate from Cisco Secure ACS, Release 5.x

If you are running Cisco Secure ACS, Release 5.x in your environment, you must upgrade to Cisco Secure ACS, Release 5.5 or above.

To migrate internal users from Cisco Secure ACS 5.x to Cisco ISE, you must install Cisco Secure ACS 5.5 Patch 4 or later, ACS 5.6, ACS 5.7 Patch 1 or later, or ACS 5.8, and then start the migration.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco