Cisco Identity Services Engine Hardware Installation Guide, Release 2.0

Physical Specifications

Table 2. Cisco SNS-3400 Series Server Environmental Specifications
Description	Specification
Temperature, operating	41 to 104°F (5 to 40°C) Derate the maximum temperature by 1°C per every 305 meters of altitude above sea level.
Temperature, non-operating	–40 to 149°F (–40 to 65°C)
Humidity (RH), noncondensing	10 to 90 percent
Altitude, operating	0 to 10,000 feet
Altitude, non-operating	0 to 40,000 feet
Sound power level Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C)	5.4
Sound pressure level Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C)	37

Note

You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator.

Note

Do not mix power supply types in the server. Both power supplies must be 450W.

Table 3. Cisco SNS-3400 Series Server 450-Watt Power Supply Specifications
Description	Specification
AC input voltage range	Low range: 100 VAC to 120 VAC High range: 200 VAC to 240 VAC
AC input frequency	Range: 47 to 63 Hz (single phase, 50 to 60Hz nominal)
AC line input current (steady state)	6.0 A peak at 100 VAC 3.0 A peak at 208 VAC
Maximum output power for each power supply	450 Watts
Power supply output voltage	Main power: 12 VDC Standby power: 12 VDC

Note

You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator.

Note

Do not mix power supply types in the server. Both power supplies must be either 650W.

Table 4. Cisco SNS-3400 Series Server 650-Watt Power Supply Specifications
Description	Specification
AC input voltage range	90 to 264 VAC (self-ranging, 180 to 264 VAC nominal)
AC input frequency	Range: 47 to 63 Hz (single phase, 50 to 60Hz nominal)
AC line input current (steady state)	7.6 A peak at 100 VAC 3.65 A peak at 208 VAC
Maximum output power for each power supply	650 Watts
Power supply output voltage	Main power: 12 VDC Standby power: 12 VDC