This document describes Cisco Identity Services Engine (ISE) compatibility with switches, wireless LAN controllers, and other policy enforcement devices as well as operating systems with which Cisco ISE interoperates.
Cisco ISE supports interoperability with any Cisco or non-Cisco RADIUS client network access device (NAD) that implements common RADIUS behavior (similar to Cisco IOS 12.x) for standards-based authentication. For a list of supported authentication methods, see the “Configure Authentication Policies” chapter of the Cisco Identity Services Engine Admin Guide, Release 1.3.
Certain advanced use cases, such as those that involve posture assessment, profiling, and web authentication, are not consistently available with non-Cisco devices or may provide limited functionality, and are therefore not supported with non-Cisco devices. In addition, certain other advanced functions like central web authentication (CWA), Change of Authorization (CoA), Security Group Access (SGA), and downloadable access control lists (ACLs), are only supported on Cisco devices. For a full list of supported Cisco devices, see Table 1.
The NADs that are not explicitly listed in Table 1 and do not support RADIUS CoA must use inline posture.
Note Some switch models and IOS versions may have reached the end-of-life date and interoperability may not be fully supported.
To support the Cisco ISE profiling service, use the latest version of NetFlow, which has additional functionality that is needed to operate the profiler. If you use NetFlow version 5, then you can use version 5 only on the primary NAD at the access layer, as it will not work anywhere else.
For Wireless LAN Controllers, note the following:
MAB supports MAC filtering with RADIUS lookup.
Support for session ID and COA with MAC filtering provides MAB-like functionality.
DNS based ACL feature will be supported in WLC 8.0. Not all Access Points support DNS based ACL. Refer to Cisco Access Points Release Notes for more details.
Table 1 lists the support for the devices as follows:
√ — Fully supported
X — Not supported
! — Limited support, some functionalities are not supported
The following are the functionalities supported by each feature:
802.1X, MAB, VLAN Assignment, dACL
RADIUS CoA and Profiling Probes
RADIUS CoA, URL Redirection + SessionID
RADIUS CoA, URL Redirection + SessionID, Local Web Auth
Guest Originating URL
RADIUS CoA, URL Redirection + SessionID, Local Web Auth
4.Minimum OS is the version in which the features got introduced.
5.Cisco Wireless LAN Controllers (WLCs) and Wireless Service Modules (WiSMs) do not support downloadable ACLs (dACLs), but support named ACLs. Autonomous AP deployments do not support the requirements for Inline Posture Node as they do not send Framed-IP-Address. Profiling services are supported for 802.1X-authenticated WLANs starting from WLC release 126.96.36.199 and for MAB-authenticated WLANs starting from WLC 188.8.131.52. FlexConnect, previously known as Hybrid Remote Edge Access Point (HREAP) mode, is supported with central authentication configuration deployment starting from WLC 184.108.40.206. For additional details regarding FlexConnect support, refer to the release notes for the applicable wireless controller platform.
Supported AAA Attributes for Third-Party VPN Concentrators
For third-party VPN concentrators to integrate with Cisco ISE and Inline Posture nodes, the following authentication, authorization, and accounting (AAA) attributes must be included in RADIUS communication:
Calling-Station-Id (for MAC_ADDRESS)
Also, for VPN devices, the RADIUS accounting message must have the framed-ip-address attribute set to the VPN client’s IP address pool.
Note All standard 802.1X supplicants can be used with Cisco ISE, Release 1.3 standard and advanced features as long as they support the standard authentication protocols supported by Cisco ISE. (For information on allowed authentication protocols, see the “Manage Authentication Policies” chapter of the Cisco Identity Services Engine Admin Guide, Release 1.3). For the VLAN change authorization feature to work in a wireless deployment, the supplicant must support IP address refresh on VLAN change.
Cisco NAC Agent Interoperability Between Cisco NAC Appliance and Cisco ISE
The Cisco NAC Agent versions 220.127.116.11 and later can be used on both Cisco NAC Appliance Releases 4.9(1), 4.9(3), 4.9(4) and Cisco ISE Releases 1 1.1.3-patch 11, 1.1.4-patch 11, 1.2.x, 1.3. This is the recommended model of deploying the NAC agent in an environment where users will be roaming between ISE and NAC deployments.
Client Machine Operating Systems and Agent Support in Cisco ISE
13.When Apple iOS devices use Protected Extensible Authentication Protocol (PEAP) with Cisco ISE or 802.1x, certificate warnings might be displayed even for publicly trusted certificates. This usually occurs when the public certificate includes a Certificate Revocation List (CRL) distribution point that the iOS device needs to verify. The iOS device cannot verify the CRL without network access. Click Confirm or Accept in the iOS device to authenticate to the network.
16.Apple Safari version 6.0 is supported only on Mac OS X 10.7.4 and later versions of the operating system.
17.If you are using Mac OS X clients with Java 7, you cannot download the Agents using Google Chrome browser. Java 7 runs only on 64-bit browsers and Chrome is a 32-bit browser. It is recommended to use either previous versions of Java or other browsers while downloading the Agents.
18.It is recommended to use the Cisco NAC/Web Agent versions along with the corresponding Cisco ISE version.
19.Cisco NAC Agent and Cisco NAC Web Agent do not support Google Chrome version 45 and later. See CSCuw19276 for more information. We recommend that you use another supported browser such as Internet Explorer 7.0, 8.0 or 9.0 or Mozilla Firefox 3.5.7, 3.6 or 20.x.
20.Microsoft Edge browser does not support NAC Agent provisioning.
21.Cisco NAC Web Agent 18.104.22.168 is supported for Cisco ISE 1.3 Patch 7.
22.In Windows 8, Internet Explorer 10 has two modes: Desktop and Metro. In Metro mode, the ActiveX plugins are restricted. You cannot download the Cisco NAC Agent in Metro mode. You must switch to Desktop mode, ensure ActiveX controls are enabled, and then launch Internet Explorer to download the Cisco NAC Agent. (If users are still not able to download Cisco NAC agent, check and enable “compatibility mode.”)
23.When you create a Cisco ISE client provisioning policy to accommodate Windows 8, you must specify the “Windows All” operating system option.
24.Windows 8 RT is not supported.
25.Cisco NAC Web Agent 22.214.171.124 is supported for Cisco ISE 1.3 Patch 7 on Windows 8.1 and Windows 8 operating systems only.
26.Cisco ISE does not support the Windows Embedded operating systems available from Microsoft.
27.When Internet Explorer 10 is installed on Windows 7, to get full network access, you need to update to March 2013 Hotfix ruleset.
28.Cisco NAC Web Agent 126.96.36.199 is supported for Cisco ISE 1.3 Patch 7 and Microsoft IE browser is not supported on Windows 7 operating system with Cisco NAC Web Agent 188.8.131.52.
30.The latest two officially-released browser versions are supported for all operating systems except Microsoft Windows; refer to Table 8 for the supported Internet Explorer versions.
31.Because of the open access-nature of Android implementation on available devices, Cisco ISE may not support certain Android OS version and device combinations.
32.Tested with Cisco ISE, Release 1.3 patch 7.
33.Tested with Cisco ISE, Release 1.3 patch 7 with latest SPW 184.108.40.206.
34.Tested with Cisco ISE, Release 1.3 patch 7.
35.In Windows 8, Internet Explorer 10 has two modes: Desktop and Metro. In Metro mode, the ActiveX plugins are restricted. You cannot download the Cisco NAC Agent in Metro mode. You must switch to Desktop mode, ensure ActiveX controls are enabled, and then launch Internet Explorer to download the Cisco NAC Agent. (If users are still not able to download Cisco NAC agent, check and enable “compatibility mode.”)
36.Cisco ISE does not support the Windows Embedded 7 versions available from Microsoft.
37.Cisco ISE, Release 1.3 patch 4 supports Windows 10 operating system and Microsoft Edge browser
38.When Internet Explorer 10 is installed on Windows 7, to get full network access, you need to update to March 2013 Hotfix ruleset.
Note When a guest user tries to log in using Google Chrome on Windows 7 OS, the login fails. It is recommended to upgrade the browser to Chrome 11 or later.
Supported Devices for On-Boarding and Certificate Provisioning
SPW from Cisco.com or Cisco ISE client provisioning feed
39.Tested with Cisco ISE, Release 1.3 patch 7.
40.Connect to secure SSID after provisioning
41.There are known EAP-TLS issues with Android 4.1.1 devices. Contact your device manufacturer for support.
42.Barnes & Noble Nook (Android) works when it has Google Play Store 2.1.0 installed.
43.While configuring the wireless properties for the connection (Security > Auth Method > Settings > Validate Server Certificate), uncheck the valid server certificate option or if you check this option, ensure that you select the correct root certificate.
44.If you are using Mac OS X clients with Java 7, you cannot download the SPWs using Google Chrome browser. Java 7 runs only on 64-bit browsers and Chrome is a 32-bit browser. It is recommended to use either previous versions of Java or other browsers while downloading the SPWs.
Requirements for CA to Interoperate with Cisco ISE
While using a CA server with Cisco ISE, make sure that the following requirements are met:
Key size should be 1024, 2048, or higher. In CA server, the key size is defined using certificate template. You can define the key size on Cisco ISE using the supplicant profile.
Key usage should allow signing and encryption in extension.
While using GetCACapabilities through the SCEP protocol, cryptography algorithm and request hash should be supported. It is recommended to use RSA + SHA1.
Online Certificate Status Protocol (OCSP) is supported. This is not directly used in BYOD, but a CA which can act as an OCSP server can be used for certificate revocation.
Note EJBCA 4.x is not supported by Cisco ISE for proxy SCEP. EJBCA is supported by Cisco ISE for standard EAP authentication like PEAP, EAP-TLS, and so on.
Client Certificate Requirements for Certificate-Based Authentication
For certificate-based authentication with Cisco ISE, the client certificate should meet the following requirements:
Supported Cryptographic Algorithms: RSA
Supported Key Sizes: 1024, 2048, or 4096 bits
Supported Secure Hash Algorithms (SHA): SHA-1 and SHA-2 (includes SHA-256)
Regulatory Compliance and Safety Information for Cisco Identity Services Engine 3300 Series Appliance, Cisco Secure Access Control System 1121 Appliance, Cisco NAC Appliance, Cisco NAC Guest Server, and Cisco NAC Profiler
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
Subscribe to the What’s New in Cisco Product Documentation as a RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.