This chapter describes the Cisco IPS system architecture, and contains the following topics:
•Purpose of Cisco IPS
•Cisco IPS 7.0 New Features
•Cisco IPS 7.0 File Structure
•Summary of Cisco IPS 7.0 Applications
Purpose of Cisco IPS
The purpose of Cisco IPS is to detect and prevent malicious network activity. You can install Cisco IPS software on two platforms: appliances and the modules. Cisco IPS contains a management application and a monitoring application. The IDM is a network management JAVA application that you can use to manage and monitor the IPS. IME is an IPS network monitoring JAVA application that you can use to view IPS events. IME also contains the IDM configuration component. The IDM and IME communicate with the IPS using HTTP or HTTPS and are hosted on your computer.
Cisco IPS software runs on the Linux operating system. We have hardened the Linux OS by removing unnecessary packages from the OS, disabling unused services, restricting network access, and removing access to the shell.
Figure A-1 illustrates the system design for IPS 7.0.
Figure A-1 System Design
For More Information
•For detailed information about MainApp, see MainApp.
•For detailed information about SensorApp, see SensorApp.
•For detailed information about CollaborationApp, see CollaborationApp.
•For detailed information about the CLI, see CLI.
Note Each application has its own configuration file in XML format.
Cisco IPS software includes the following applications:
•MainApp—Initializes the system, starts and stops the other applications, configures the OS, and performs upgrades. It contains the following components:
–ctlTransSource (Control Transaction server)—Allows sensors to send control transactions. This is used to enable the master blocking sensor capability of Attack Response Controller (formerly known as Network Access Controller).
–Event Store—An indexed store used to store IPS events (error, status, and alert system messages) that is accessible through the CLI, IDM, IME, ASDM, or SDEE.
Note The Event Store has a fixed size of 30 MB for all platforms.
–InterfaceApp—Handles bypass and physical settings and defines paired interfaces. Physical settings are speed, duplex, and administrative state.
–Logger—Writes all the log messages of the application to the log file and the error messages of the application to the Event Store.
–Attack Response Controller (formerly known as Network Access Controller) —Manages remote network devices (firewalls, routers, and switches) to provide blocking capabilities when an alert event has occurred. ARC creates and applies ACLs on the controlled network device or uses the shun command (firewalls).
–NotificationApp—Sends SNMP traps when triggered by alert, status, and error events. NotificationApp uses the public domain SNMP agent. SNMP GETs provide information about the general health of the sensor.
–Web Server (HTTP SDEE server)—Provides a web interface and communication with other IPS devices through SDEE protocol using several servlets to provide IPS services.
–AuthenticationApp—Verifies that users are authorized to perform CLI, IDM, IME, ASDM, or SDEE actions.
•SensorApp (Analysis Engine)—Performs packet capture and analysis.
•CollaborationApp—Interfaces with MainApp and SensorApp using various interprocess communication technologies including IDAPI control transactions, semaphores, shared memory, and file exchange.
•CLI—The interface that is run when you successfully log in to the sensor through Telnet or SSH. All accounts created through the CLI will use the CLI as their shell (except the service account—only one service account is allowed). Allowed CLI commands depend on the privilege of the user.
All Cisco IPS applications communicate with each other through a common API called IDAPI. Remote applications (other sensors, management applications, and third-party software) communicate with sensors through SDEE protocol.
The sensor has the following partitions:
•Application partition—A full IPS system image.
•Maintenance partition—A special purpose IPS image used to reimage the application partition of the IDSM2. When you reimage the maintenance partition, all configuration settings are lost.
•Recovery partition—A special purpose image used for recovery of the sensor. Booting into the recovery partition enables you to completely reimage the application partition. Network settings are preserved, but all other configuration is lost.
Cisco IPS 7.0 New Features
Cisco IPS 7.0 contains the following new features:
•IPS 7.0(4)E4 introduces AAA RADIUS authentication.
In addition to local AAA authentication, you can now configure RADIUS servers to perform sensor user authentication. You can configure the IPS to use AAA RADIUS authentication for user accounts, which aids in the operation of large IPS deployments.
•IPS 7.0(1)E3 introduces global correlation
–Cisco IPS contains a new security capability, Cisco Global Correlation, which uses the immense security intelligence that we have amassed over the years. At regular intervals, Cisco IPS receives threat updates from the Cisco SensorBase Network, which contain detailed information about known threats on the Internet, including serial attackers, Botnet harvesters, Malware outbreaks, and dark nets. The IPS uses this information to filter out the worst attackers before they have a chance to attack critical assets. It then incorporates the global threat data in to its system to detect and prevent malicious activity even earlier.
–10GE interface card
The 10GE interface card (part numbers IPS-2X10GE-SR-INT and IPS-2X10GE-SR-INT=) provides two 10000 Base-SX (fiber) interfaces. The IPS 4260 supports one 10GE interface card for a total of two 10GE fiber interfaces. The IPS 4270-20 supports up to two 10GE interface cards for a total of four 10GE fiber interfaces.
–Deprecation of the RDEP event server.
We deprecated the RDEP event server service in IPS 6.1 and we removed it in IPS 7.0(1). We added the SDEE event server service to IPS 5.0 as a replacement for the RDEP event server service. We supported both the SDEE event server and RDEP event server through IPS 5.0, 5.1, 6.0, and 6.1 to allow time for monitoring tools to transition to using the SDEE event server for retrieval of events. With IPS 7.0(1), monitoring tools must use the SDEE event server service for the retrieval of events.
•IME 7.0(1) introduces support for the global correlation features:
–Support for configuring the global correlation features on sensors running IPS 7.0(1).
–Support for viewing and monitoring alerts from IPS 7.0(1) sensors containing global correlation data.
–Support for generating global correlation reports.
For More Information
•For detailed information about AAA RADIUS authentication, see Configuring Authentication and Users.
•For more information about global correlation and how to configure it, see Chapter 11 "Configuring Global Correlation."
•For more information about the 10GE interface card, refer to Installing and Removing Interface Cards in Cisco IPS 4260 and IPS 4270-20.
You interact with Cisco IPS in the following ways:
•Configure device parameters
You generate the initial configuration for the system and its features. This is an infrequent task, usually done only once. The system has reasonable default values to minimize the number of modifications you must make. You can configure Cisco IPS through the CLI, IDM, IME, CSM, ASDM, or through another application using SDEE.
You make minor modifications to the configuration, primarily to Analysis Engine, which is the portion of the application that monitors network traffic. You can tune the system frequently after initially installing it on the network until it is operating efficiently and only producing information you find useful. You can create custom signatures, enable features, or apply a service pack or signature update. You can tune Cisco IPS through the CLI, IDM, IME, CSM, ASDM, or through another application using SDEE.
You can schedule automatic updates or apply updates immediately to the applications and signature data files. You can update Cisco IPS through the CLI, IDM, IME, CSM, ASDM, or through another application using SDEE.
You can retrieve data (status messages, errors, and alerts) from the system through the CLI, IDM, IME, CSM, ASDM, CS MARS or another application using SDEE.
Cisco IPS has the following security features:
•Network access is restricted to hosts who are specifically allowed access.
•All remote hosts who attempt to connect through Web Server, SSH and SCP or Telnet will be authenticated.
•By default Telnet access is disabled. You can choose to enable Telnet.
•By default SSH access is enabled.
•An FTP server does not run on the sensor. You can use SCP to remotely copy files.
•By default Web Server uses TLS or SSL. You can choose to disable TLS and SSL.
•Unnecessary services are disabled.
•Only the SNMP set required by the Cisco MIB Police is allowed within the CISCO-CIDS-MIB. OIDs implemented by the public domain SNMP agent will be writeable when specified by the MIB.
This section describes MainApp, and contains the following topics:
•Attack Response Controller
MainApp includes all IPS components except SensorApp and the CLI. It is loaded by the operating system at startup and loads SensorApp. MainApp then brings the following subsystem components up:
•External Product Interface
•Health and security monitoring
MainApp has the following responsibilities:
•Validate the Cisco-supported hardware platform
•Report software version and PEP information
•Start, stop, and report the version of the IPS components
•Configure the host system settings
•Manage the system clock
•Manage the Event Store
•Install and uninstall software upgrades
Note In Cisco IPS, MainApp can automatically download signature and signature engine updates from Cisco.com.
•Shut down or reboot the operating system
MainApp responds to the show version command by displaying the following information:
•Sensor build version
•Version of each running application
•Version and timestamp of each installed upgrade
•Next downgrade version of each installed upgrade
•Platform version (for example, IDS-4260-K9, WS-SVC-IDSM2)
•Version of sensor build on the other partition
MainApp also gathers the host statistics and reports the health and security monitoring status.
This section describes Event Store, and contains the following topics:
•Understanding Event Store
•Event Data Structures
Understanding Event Store
Note The Event Store has a fixed size of 30 MB for all platforms.
Each IPS event is stored in Event Store with a time stamp and a unique, monotonic, ascending ID. This time stamp is the primary key used to index the event into the fixed-size, indexed Event Store. When the circular Event Store has reached its configured size, the oldest event or events are overwritten by the new event being stored. SensorApp is the only application that writes alert events into the Event Store. All applications write log, status, and error events into the Event Store.
The fixed-sized, indexed Event Store allows simple event queries based on the time, type, priority, and a limited number of user-defined attributes. If each event is assigned a priority of low, medium, or high, a single event query can specify a list of desired event types, intrusion event priorities, and a time range.
Table A-1 shows some examples:
Table A-1 IPS Event Examples
Get all status events that are stored.
Get all error and status events that were stored before time 65743.
Get status events that were stored at or after time 65743.
Get all intrusion and attack response events with low priority that are stored.
Get attack response, error, status, and intrusion events with medium or high priority that were stored between time 4123000000 and 4123987256.
The size of the Event Store allows sufficient buffering of the IPS events when the sensor is not connected to an IPS event consumer. Sufficient buffering depends on your requirements and the capabilities of the nodes in use. The oldest events in the circular buffer are replaced by the newest events.
Event Data Structures
The various functional units communicate the following seven types of data:
•Intrusion events—Produced by SensorApp. The sensor detects intrusion events.
•Error events—Caused by hardware or software malfunctions.
•Status events—Reports of a change in the status of the application, for example, that its configuration has been updated.
•Control transaction log events—The sensor logs the result of a control transaction.
•Attack response events—Actions for the ARC, for example, a block request.
•Debug events—Highly detailed reports of a change in the status of the application used for debugging.
•Control transaction data—Data associated with control transactions, for example, diagnostic data from an application, session logs, and configuration data to or from an application.
All seven types of data are referred to collectively as IPS data. The six event types—intrusion, error, status, control transaction log, network access, and debug—have similar characteristics and are referred to collectively as IPS events. IPS events are produced by the several different applications that make up the IPS and are subscribed to by other IPS applications. IPS events have the following characteristics:
•They are spontaneously generated by the application instances configured to do so. There is no request from another application instance to generate a particular event.
•They have no specific destination. They are stored and then retrieved by one or more application instances.
Control transactions involve the following types of requests:
•Request to update the configuration data of an application instance
•Request for the diagnostic data of an application instance
•Request to reset the diagnostic data of an application instance
•Request to restart an application instance
•Request for ARC, such as a block request
Control transactions have the following characteristics:
•They always consist of a request followed by a response.
The request and response may have an arbitrary amount of data associated with them. The response always includes at least a positive or negative acknowledgment.
•They are point-to-point transactions.
Control transactions are sent by one application instance (the initiator) to another application instance (the responder).
IPS data is represented in XML format as an XML document. The system stores user-configurable parameters in several XML files.
IPS applications generate IPS events to report the occurrence of some stimulus. The events are the data, such as the alerts generated by SensorApp or errors generated by any application. Events are stored in a local database known as the Event Store.
There are five types of events:
•evAlert—Alert event messages that report when a signature is triggered by network activity.
•evStatus—Status event messages that report the status and actions of the IPS applications.
•evError— Error event messages that report errors that occurred while attempting response actions.
•evLogTransaction—Log transaction messages that report the control transactions processed by each sensor application.
•evShunRqst—Block request messages that report when ARC issues a block request.
You can view the status and error messages using the CLI, IME, and ASDM. SensorApp and ARC log response actions (TCP resets, IP logging start and stop, blocking start and stop, trigger packet) as status messages.
NotificationApp allows the sensor to send alerts and system error messages as SNMP traps. It subscribes to events in the Event Store and translates them into SNMP MIBs and sends them to destinations through a public-domain SNMP agent. NotificationApp supports sending sets and gets. The SNMP GETs provide information about basic sensor health.
NotificationApp sends the following information from the evAlert event in sparse mode:
•Time (UTC and local time)
NotificationApp sends the following information from the evAlert event in detail mode:
•Time (UTC and local time)
•IP log IDs
NotificationApp determines which evError events to send as a trap according to the filter that you define. You can filter based on error severity (error, fatal, and warning). NotificationApp sends the following information from the evError event:
•Time (UTC and local time)
NotificationApp supports GETs for the following general health and system information from the sensor:
•Fragments in FRP
•Datagrams in FRP
•TCP streams in embryonic state
•TCP streams in established state
•TCP streams in closing state
•TCP streams in system
•TCP packets queued for reassembly
•Total nodes active
•TCP nodes keyed on both IP addresses and both ports
•UDP nodes keyed on both IP addresses and both ports
•IP nodes keyed on both IP addresses
•Sensor memory critical stage
•Command and control packet statistics
•Memory usage for the system
Note Not all IPS platforms support PEP.
NotificationApp provides the following statistics:
•Number of error traps
•Number of event action traps
•Number of SNMP GET requests
•Number of SNMP SET requests
CtlTransSource is an application that forwards locally initiated remote control transactions to their remote destinations using HTTP protocol. CtlTransSource initiates either TLS or non-TLS connections and communicates remote control transactions to HTTP servers over these connections.
CtlTransSource must establish sufficient credentials on the remote HTTP server to execute a remote control transaction. It establishes its credentials by presenting an identity to the HTTP server on the remote node in the form of a username and password (basic authentication). When the authentication is successful, the requestor is assigned a cookie containing a user authentication that must be presented with each request on that connection.
The transactionHandlerLoop method in the CtlTransSource serves as a proxy for remote control transaction. When a local application initiates a remote control transaction, IDAPI initially directs the transaction to CtlTransSource. The transactionHandlerLoop method is a loop that waits on remote control transactions that are directed to CtlTransSource.
Figure A-2 shows the transactionHandlerLoop method in the CtlTransSource.
Figure A-2 CtlTransSource
When the transactionHandlerLoop receives a remotely addressed transaction, it tries to forward the remote control transaction to its remote destination. The transactionHandlerLoop formats the transaction into a control transaction message. The transactionHandlerLoop uses the HttpClient classes to issue the control transaction request to the HTTP server on the remote node. The remote HTTP server handles the remote control transaction and returns the appropriate response message in an HTTP response. If the remote HTTP server is an IPS web server, the web server uses the CtlTransSource servlet to process the remote control transactions.
The transactionHandlerLoop returns either the response or a failure response as the response of the control transaction to the initiator of the remote control transaction. If the HTTP server returns an unauthorized status response (indicating the HTTP client has insufficient credentials on the HTTP server), the transactionHandlerLoop reissues the transaction request using the designated username and password of the CtlTransSource to authenticate the identity of the requestor. The transactionHandlerLoop continues to loop until it receives a control transaction that directs it to exit or until its exit event is signaled.
Attack Response Controller
This section describes ARC, and contains the following topics:
•Supported Blocking Devices
•ACLs and VACLs
•Maintaining State Across Restarts
•Connection-Based and Unconditional Blocking
•Blocking with Cisco Firewalls
•Blocking with Catalyst Switches
The main responsibility of ARC is to block events. When it responds to a block, it either interacts with the devices it is managing directly to enable the block or it sends a block request through the Control Transaction Server to a master blocking sensor. The web server on the master blocking sensor receives the control transaction and passes it to the Control Transaction Server, which passes it to ARC. ARC on the master blocking sensor then interacts with the devices it is managing to enable the block.
Figure A-3 illustrates ARC.
Figure A-3 ARC
Note An ARC instance can control 0, 1, or many network devices. ARC does not share control of any network device with other ARC applications, IPS management software, other network management software, or system administrators. Only one ARC instance is allowed to run on a given sensor.
ARC initiates a block in response to one of the following:
•An alert event generated from a signature that is configured with a block action
A block configured manually through the CLI, IDM, IME, or ASDM
•A block configured permanently against a host or network address
When you configure ARC to block a device, it initiates either a Telnet or SSH connection with the device. ARC maintains the connection with each device. After the block is initiated, ARC pushes a new set of configurations or ACLs (one for each interface direction) to each controlled device. When a block is completed, all configurations or ACLs are updated to remove the block.
ARC has the following features:
•Communication through Telnet and SSH 1.5 with 3DES (the default) or DES encryption
Only the protocol specified in the ARC configuration for that device is attempted. If the connection fails for any reason, ARC attempts to reestablish it.
•Preexisting ACLs on routers and VACLs on switches
If a preexisting ACL exists on a router interface or direction that is controlled by ARC, you can specify that this ACL be merged into the ARC-generated configuration, either before any blocks by specifying a preblock ACL or after any blocks by specifying a postblock ACL. The Catalyst 6000 VACL device types can have a preblock and postblock VACL specified for each interface that ARC controls. The firewall device types use a different API to perform blocks and ARC does not have any effect on preexisting ACLs on the firewalls.
Note Catalyst 5000 RSM and Catalyst 6000 MSFC2 network devices are supported in the same way as Cisco routers.
•Forwarding blocks to a list of remote sensors
ARC can forward blocks to a list of remote sensors, so that multiple sensors can in effect collectively control a single network device. Such remote sensors are referred to as master blocking sensors.
•Specifying blocking interfaces on a network device
You can specify the interface and direction where blocking is performed in the ARC configuration for routers. You can specify the interface where blocking is performed in the VACL configuration.
Note Cisco firewalls do not block based on interface or direction, so this configuration is never specified for them.
•ARC can simultaneously control up to 250 interfaces.
•Blocking hosts or networks for a specified time
ARC can block a host or network for a specified number of minutes or indefinitely. ARC determines when a block has expired and unblocks the host or network at that time.
•Logging important events
ARC writes a confirmation event when block or unblock actions are completed successfully or if any errors occur. ARC also logs important events such as loss and recovery of a network device communication session, configuration errors, and errors reported by the network device.
•Maintaining the blocking state across ARC restarts
ARC reapplies blocks that have not expired when a shutdown or restart occurs. ARC removes blocks that have expired while it was shut down.
Note ARC can only maintain the blocking state successfully if no one changes the system time while the application is shut down.
•Maintaining blocking state across network device restarts
ARC reapplies blocks and removes expired blocks as needed whenever a network device is shut down and restarted. ARC is not affected by simultaneous or overlapping shutdowns and restarts of ARC.
•Authentication and authorization
ARC can establish a communications session with a network device that uses AAA authentication and authorization including the use of remote TACACS+ servers.
•Two types of blocking
ARC supports host blocks and network blocks. Host blocks are connection based or unconditional. Network blocks are always unconditional.
ARC can control network devices that use a NAT address for the sensor. If you specify a NAT address when you configure a network device, that address is used instead of the local IP address when the sensor address is filtered from blocks on that device.
•Single point of control
ARC does not share control of network devices with administrators or other software. If you must update a configuration, shut down ARC until the change is complete. You can enable or disable ARC through the CLI or any Cisco IPS manager. When ARC is reenabled, it completely reinitializes itself, including rereading the current configuration for each controlled network device.
Note We recommend that you disable ARC from blocking when you are configuring any network device, including firewalls.
•Maintains up to 250 active blocks at any given time
ARC can maintain up to 250 active blocks at a time. Although ARC can support up to 65535 blocks, we recommend that you allow no more than 250 at a time.
Note The number of blocks is not the same as the number of interface and directions.
Supported Blocking Devices
ARC can control the following devices:
•Cisco routers running Cisco IOS 11.2 or later
Note To perform rate limiting, the routers must be running Cisco IOS 12.3 or later.
•Catalyst 5000 series switches with Supervisor Engine software 5.3(1) or later running on the supervisor engine, and IOS 11.2(9)P or later running on the RSM.
Note You must have the RSM because blocking is performed on the RSM.
•Catalyst 6000 series switches with PFC installed running Catalyst software 5.3 or later
•Catalyst 6000 MSFC2 with Catalyst software 5.4(3) or later and Cisco IOS 12.1(2)E or later on the MSFC2
•Cisco ASA 500 series models: ASA 5510, ASA 5520, and ASA 5540
Note The FWSM cannot block in multi-mode admin context.
ACLs and VACLs
If you want to filter packets on an interface or direction that ARC controls, you can configure ARC to apply an ACL before any blocks (preblock ACL) and to apply an ACL after any blocks (postblock ACL). These ACLs are configured on the network device as inactive ACLs. You can define preblock and postblock ACLs for each interface and direction. ARC retrieves and caches the lists and merges them with the blocking ACEs whenever it updates the active ACL on the network device. In most cases, you will want to specify a preexisting ACL as the postblock ACL so that it does not prevent any blocks from taking effect. ACLs work by matching a packet to the first ACE found. If this first ACE permits the packet, a subsequent deny statement will not be found.
You can specify different preblock and postblock ACLs for each interface and direction, or you can reuse the same ACLs for multiple interfaces and directions. If you do not want to maintain a preblock list, you can use the never block option and always block hosts and networks by using existing configuration statements. A forever block is a normal block with a timeout value of -1.
ARC only modifies ACLs that it owns. It does not modify ACLs that you have defined. The ACLs maintained by ARC have a specific format that should not be used for user-defined ACLs. The naming convention is IPS_<interface_name>_[in | out]_[0 | 1]. <interface_name> corresponds to the name of the blocking interface as given in the ARC configuration.
For Catalyst switches, it is a blocking interface VLAN number. Do not use these names for preblock and postblock ACLs.
For Catalyst 6000 VACLs, you can specify a preblock and postblock VACL and only the interface is specified (direction is not used in VLANs).
For firewalls, you cannot use preblock or postblock ACLs because the firewall uses a different API for blocking. Instead you must create ACLs directly on the firewalls.
Maintaining State Across Restarts
When the sensor shuts down, ARC writes all blocks and rate limits (with starting timestamps) to a local file (nac.shun.txt) that is maintained by ARC. When ARC starts, this file is used to determine if any block updates should occur at the controlled network devices. Any unexpired blocks found in the file are applied to the network devices at startup. When ARC shuts down, no special actions on the ACLs are taken even if outstanding blocks are in effect. The nac.shun.txt file is accurate only if the system time is not changed while ARC is not running.
Do not make manual changes to the nac.shun.txt file.
The following scenarios demonstrate how ARC maintains state across restarts.
There are two blocks in effect when ARC stops and one of them expires before ARC restarts. When ARC restarts, it first reads the nac.shun.txt file. It then reads the preblock and postblock ACLs or VACLs. The active ACL or VACL is built in the following order:
1. The allow sensor_ ip_address command (unless the allow sensor shun command has been configured)
2. Preblock ACL
3. The always block command entries from the configuration
4. Unexpired blocks from nac.shun.txt
5. Postblock ACL
When a host is specified as never block in the ARC configuration, it does not get translated into permit statements in the ACL. Instead, it is cached by ARC and used to filter incoming addShunEvent events and addShunEntry control transactions.
There are no preblock or postblock ACLs specified, but there is an existing active ACL. The new ACL is built in the following order:
1. The allow sensor_ ip_address command (unless the allow sensor shun command has been configured)
2. The always block command entries from the configuration
3. Unexpired blocks from nac.shun.txt
4. The permit IP any any command
Connection-Based and Unconditional Blocking
ARC supports two types of blocking for hosts and one type of blocking for networks. Host blocks are connection-based or unconditional. Network blocks are always unconditional.
When a host block is received, ARC checks for the connectionShun attribute on the host block. If connectionShun is set to true, ARC performs connection blocking. Any host block can contain optional parameters, such as destination IP address, source port, destination port, and protocol. For a connection block to take place, at least the source and destination IP address must be present. If the source port is present on a connection block, it is ignored and not included in the block.
Under the following conditions, ARC forces the block to be unconditional, converting the block from connection type if necessary:
•A block of any type is active for a specified source IP address
•A new block of any type is received for that source IP address
•The new block differs in any of its optional parameters (except the source port) from the old block
When a block is updated (for example, when a new block arrives while an existing block for that source IP address or network is already in effect), the remaining minutes of the existing block are determined. If the time for the new block is less than or equal to the remaining minutes, no action is taken. Otherwise, the new block timeout replaces the existing block timeout.
Cisco firewalls do not support connection blocking of hosts. When a connection block is applied, the firewall treats it like an unconditional block. Cisco firewalls also do not support network blocking. ARC never tries to apply a network block to a Cisco firewall.
Blocking with Cisco Firewalls
ARC performs blocks on firewalls using the shun command. The shun command has the following formats:
•To block an IP address:
shun srcip [destination_ip_address source_port destination_port [port]]
•To unblock an IP address:
•To clear all blocks:
•To show active blocks or to show the global address that was actually blocked:
ARC uses the response to the show shun command to determine whether the block was performed.
The shun command does not replace existing ACLs, conduits, or outbound commands, so there is no need to cache the existing firewall configuration, nor to merge blocks into the firewall configuration.
Do not perform manual blocks or modify the existing firewall configuration while ARC is running.
If the block command specifies only the source IP address, existing active TCP connections are not broken, but all incoming packets from the blocked host are dropped.
When ARC first starts up, the active blocks in the firewall are compared to an internal blocking list. Any blocks that do not have a corresponding internal list entry are removed.
ARC supports authentication on a firewall using local usernames or a TACACS+ server. If you configure the firewall to authenticate using AAA but without the TACACS+ server, ARC uses the reserved username pix for communications with the firewall.
If the firewall uses a TACACS+ server for authentication, you use a TACACS+ username. In some firewall configurations that use AAA logins, you are presented with three password prompts: the initial firewall password, the AAA password, and the enable password. ARC requires that the initial firewall password and the AAA password be the same.
When you configure a firewall to use NAT or PAT and the sensor is checking packets on the firewall outside network, if you detect a host attack that originates on the firewall inside network, the sensor tries to block the translated address provided by the firewall. If you are using dynamic NAT addressing, the block can be ineffective or cause innocent hosts to be blocked. If you are using PAT addressing, the firewall could block the entire inside network. To avoid these situations, position your sensor on the inside interface or do not configure the sensor to block.
Blocking with Catalyst Switches
Catalyst switches with a PFC filter packets using VACLs. VACLs filter all packets between VLANs and within a VLAN.
MSFC router ACLs are supported when WAN cards are installed and you want the sensor to control the interfaces through the MSFC2.
Note An MSFC2 card is not a required part of a Catalyst switch configuration for blocking with VACLs.
When you configure ARC for the Catalyst switch, do not specify a direction with the controlled interface. The interface name is a VLAN number. Preblock and postblock lists should be VACLs.
The following commands apply to the Catalyst VACLs:
•To view an existing VACL:
show security acl info acl_name
•To block an address (address_spec is the same as used by router ACLs):
set security acl ip acl_name deny address_spec
•To activate VACLs after building the lists:
•To clear a single VACL:
clear security acl map acl_name
•To clear all VACLs:
clear security acl map all
•To map a VACL to a VLAN:
set sec acl acl_name vlans
The sensor logs all events (alert, error, status, and debug messages) in a persistent, circular buffer. The sensor also generates IP logs. The messages and IP logs are accessible through the CLI, IDM, and ASDM.
The IPS applications use Logger to log messages. Logger sends log messages at any of five levels of severity: debug, timing, warning, error, and fatal. Logger writes the log messages to /usr/cids/idsRoot/log/main.log, which is a circular text file. New messages overwrite older messages when the file reaches its maximum size; therefore the last message written may not appear at the end of the main.log. Search for the string "= END OF FILE =" to locate the last line written to the main.log.
The main.log is included in the show tech-support command output. If the message is logged at warning level or above (error or fatal), Logger converts the message to an evError event (with the corresponding error severity) and inserts it in Event Store.
Logger receives all syslog messages, except cron messages, that are at the level of informational and above (*.info;cron.none), and inserts them into Event Store as evErrors with the error severity set to Warning. Logger and application logging are controlled through the service logger commands.
Logger can control what log messages are generated by each application by controlling the logging severity for different logging zones. You would only access the individual-zone-control of the logger service at the request and supervision of a TAC engineer or developer. For troubleshooting purposes, TAC might request that you turn on debug logging.
The InterfaceApp is a subsystem of the MainApp, which is used for configuring and managing the Ethernet interfaces on the IPS device. There are two types of interfaces—management interfaces and sensing interfaces. The management interface is used for managing the IPS device using management applications, such as the IDM, IME, CSM, or CLI.The sensing interfaces represent the packet interfaces, which are used for directing the traffic meant for inspection. In addition to configuration, the InterfaceApp also provides packet statistics for the interfaces.
The InterfaceApp interacts with other applications on the IPS device such as the SensorApp, through control transactions. It also communicates with NIC drivers on each platform to set the interface properties such as speed, duplex, and so forth. The current interface configuration is stored by the InterfaceApp and used when the IPS device is started.
NIC drivers on each platform send asynchronous events called notifications that are related to the state of the Ethernet interfaces, for example, link up and link down notification, to the InterfaceApp. The InterfaceApp collects these notifications and sends the appropriate events.
The InterfaceApp provides a unified view of Ethernet interfaces on different platforms with varied hardware configuration, so that the same set of commands can be used for configuring and managing them.
This section describes AuthenticationApp, and contains the following topics:
•Authenticating Users Locally
•Authenticating Users Through RADIUS
•Configuring Authentication Locally on the Sensor
•Configuring Authentication Through RADIUS on the Sensor
•Managing TLS and SSH Trust Relationships
AuthenticationApp has the following responsibilities:
•To authenticate the identity of a user
•To administer the accounts, privileges, keys, and certificates of the user
•To configure which authentication methods are used by AuthenticationApp and other access services on the sensor
Authenticating Users Locally
You must configure authentication on the sensor to establish appropriate security for user access. When you install a sensor, an initial cisco account with an expired password is created. A user with administrative access to the sensor accesses the sensor through the CLI or an IPS manager, such as the IDM or ASDM, by logging in to the sensor using the default administrative account (cisco). In the CLI, the administrator is prompted to change the password. IPS managers initiate a setEnableAuthenticationTokenStatus control transaction to change the password of an account.
Through the CLI or an IPS manager, the administrator configures which authentication method is used, such as username and password or an SSH authorized key. The application servicing the administrator initiates a setAuthenticationConfig control transaction to establish the authentication configuration.
The authentication configuration includes a login attempt limit value that is used to specify how account locking is handled. Account locking is invoked when the number of consecutive failed login attempts for a given account exceeds the login attempt limit value. After an account is locked, all further attempts to log in to that account are rejected. The account is unlocked by resetting the authentication token of the account using the setEnableAuthenticationTokenStatus control transaction. The account locking feature is disabled when the login attempt limit value is set to zero.
The administrator can add additional user accounts either through the CLI or an IPS manager.
Authenticating Users Through RADIUS
Cisco IPS 7.0(4) adds RADIUS enhancements that extend the AAA functionality on the sensor so that users can be authenticated and authorized by RADIUS servers. Previously, sensors only performed local AAA using locally configured usernames, passwords, and privileges.
AuthenticationApp configures and controls IPS AAA and password management. While AuthenticationApp also provides some of the AAA functionality of the sensor, most of the AAA functionality is provided by Pluggable Authentication Modules (PAM). PAM currently provides the functionality to locally set user passwords and authenticate users from usernames and passwords configured locally on the sensor.
AuthenticationApp creates PAM configuration files that correspond to the AAA methods configured on the sensor. These configuration files tell PAM which modules and methods are to be used for AAA. These files also provide addition information, such as the RADIUS server addresses, used by PAM modules.
PAM RADIUS modules, added to support RADIUS AAA, handle the RADIUS communication with external RADIUS servers. These modules send the username and password information provided by calling applications to the AAA servers, and process the server responses to determine user authentication and authorization status. These modules also modify local user account information as needed.
For More Information
For detailed information about how to configure the sensor to use RADIUS authentication, see Configuring Authentication and Users.
Configuring Authentication Locally on the Sensor
When a user tries to access the sensor through a service such as Web Server or the CLI, the identity of the user must be authenticated and the privileges of the user must be established. The service that is providing access to the user initiates an execAuthenticateUser control transaction request to AuthenticationApp to authenticate the identity of the user. The control transaction request typically includes the username and a password, or the identity of the user can be authenticated using an SSH authorized key.
AuthenticationApp responds to the execAuthenticateUser control transaction request by attempting to authenticate the identity of the user. AuthenticationApp returns a control transaction response that contains the authentication status and privileges of the user. If the identity of the user cannot be authenticated, AuthenticationApp returns an unauthenticated status and anonymous user privileges in the control transaction response. The control transaction response also indicates if the account password has expired. User interface applications that authenticate users by initiating an execAuthenticateUser control transaction prompt the user to change the password.
AuthenticationApp uses the underlying operating system to confirm the identity of a user. All the IPS applications send control transactions to AuthenticationApp, which then uses the operating system to form its responses.
Remote shell services, Telnet and SSH, are not IPS applications. They call the operating system directly. If the user is authenticated, it launches the IPS CLI. In this case, the CLI sends a special form of the execAuthenticateUser control transaction to determine the privilege level of the logged-in user. The CLI then tailors the commands it makes available based on this privilege level.
For More Information
For detailed information about how to configure the sensor to use local authentication, see Configuring Authentication and Users.
Configuring Authentication Through RADIUS on the Sensor
When you enable RADIUS authentication, the sensor delegates username and password authentication to remote RADIUS servers. The username and password are sent in an authentication request to the configured RADIUS servers. The response of the server determines whether the user login is authenticated.
You can configure the sensor to send its authentication requests to a primary RADIUS server and optionally to a secondary server when the primary server is unresponsive. When a secondary server is configured and a primary server authentication request times out, the request is sent to the secondary server. In this case, the response from the secondary server is used.
When RADIUS authentication is enabled, you can configure the sensor to fall back to local authentication when it cannot contact the RADIUS servers. In this case, the sensor authenticates against its locally configured user accounts. If the option to fallback to local authentication is disabled, users who are not connected through the console port cannot log in to the sensor when the RADIUS servers are not available. For this feature the sensor only falls back to local authentication when AAA servers are unresponsive; the sensor does not try local authentication when an AAA server rejects the authentication requests of the user.
When you enable RADIUS authentication, there are three options for authenticating users connected through the console port:
•Local Authentication—Only local user accounts are used for authenticating users connected through the console port. RADIUS authentication is not attempted.
•RADIUS and Local Authentication—Authenticating the user on the console port through RADIUS is tried first. If RADIUS authentication fails, local authentication is attempted. This is the default setting.
•RADIUS Authentication—Only RADIUS authentication is used for authenticating users connected through the console port. When this option is enabled, the configured RADIUS settings are used. If RADIUS is configured to fall back to local authentication when RADIUS servers are unresponsive, this behavior also applies to the console port.
You must specify the user role for each user that is authenticated through RADIUS. There are two ways to specify the user role:
•You can specify a default user role on the sensor. When a user authenticates using RADIUS and the RADIUS server does not provide sensor user role information, the role of the user is set to the default user role. If a default user role is not specified, attempts to authenticate a user with a RADIUS server that does not provide the sensor user role information fails.
•You can embed the sensor user role for each user or group of users on the RADIUS server in the Reply attribute of the Accept Message using the text ips-role=<user role> where the <user role> is either administrator, operator, or viewer.
For More Information
For detailed information about how to configure the sensor to use RADIUS authentication, see Configuring Authentication and Users.
Managing TLS and SSH Trust Relationships
Encrypted communications over IP networks provide data privacy by making it impossible for a passive attacker to discover from the packets exchanged alone the secret key needed to decrypt the data in the packets.
However, an equally dangerous attack vector is for an imposter to pretend to be the server end of the connection. All encryption protocols provide a means for clients to defend themselves from these attacks. IPS supports two encryption protocols, SSH and TLS, and AuthenticationApp helps manage trust when the sensor plays either the client or server role in encrypted communications.
The IPS Web Server and SSH server are server endpoints of encrypted communications. They protect their identities with a private key and offer a public key to clients that connect to them. For TLS this public key is included inside an X.509 certificate, which includes other information. Remote systems that connect to the sensor should verify that the public key received during connection establishment is the key they expect.
Clients must maintain a list of trusted public keys to protect themselves from man-in-the-middle attacks. The exact procedure by which this trust is established varies depending on the protocol and client software. In general, the client displays a fingerprint of 16 or 20 bytes. The human operator who is configuring the client to establish trust should use an out-of-band method to learn the key fingerprints of the server before attempting to establish trust. If the fingerprints match, the trust relationship is established and henceforth the client can automatically connect with that server and be confident that the remote server is not an imposter.
You can use the show ssh server-key and show tls fingerprint to display the key fingerprints of the sensor. By recording the output of these commands when directly connected to the sensor console, you can reliably use this information to confirm the identity of the sensor over the network later when establishing trust relationships.
For example, when you initially connect to a sensor through the Microsoft Internet Explorer web browser, a security warning dialog box indicates that the certificate is not trusted. Using the user interface of Internet Explorer, you can inspect the certificate thumbprint, a value that should exactly match the SHA1 fingerprint displayed by the show tls fingerprint command. After verifying this, add this certificate to the list of trusted CAs of the browser to establish permanent trust.
Each TLS client has different procedures for establishing this trust. The sensor itself includes a TLS client that is used to send control transactions to other sensors and download upgrades and configuration files from other TLS web servers. Use the tls trusted-host command to establish trust of the TLS servers with which the sensor communicates.
Similarly, the sensor includes an SSH client that is used to communicate with managed network devices, download upgrades, and copy configurations and support files to remote hosts. Use the ssh host-key command to establish trust relationships with the SSH servers the sensor will contact.
You can manage the list of TLS trusted certificates and SSH known hosts through the commands service trusted-certificates and service ssh-known-hosts.
X.509 certificates include additional information that can increase the security of the trust relationship; however, these can lead to confusion. For example, an X.509 certificate includes a validity period during which the certificate can be trusted. Typically this period is a number of years starting at the moment the certificate is created. To ensure that an X.509 certificate is valid at the moment it is being used requires that the client system maintain an accurate clock.
X.509 certificates are also tied to a particular network address. Sensors fill this field with the IP address of the command and control interface of the sensor. Consequently, if you change the command and control IP address of the sensor, the X.509 certificate of the server is regenerated. You must reconfigure all clients on the network that trusted the old certificate to locate the sensor at its new IP address and trust the new certificate.
By using the SSH known hosts and TLS trusted certificates services in AuthenticationApp, you can operate sensors at a high level of security.
Web Server provides SDEE support, which enables the sensor to report security events, receive IDIOM transactions, and serve IP logs.
Web Server supports HTTP 1.0 and 1.1. Communications with Web Server often include sensitive information, such as passwords, that would severely compromise the security of the system if an attacker were able to eavesdrop. For this reason, sensors ship with TLS enabled. The TLS protocol is an encryption protocol that is compatible with SSL.
Note We deprecated the RDEP event sever service in IPS 6.1, and deleted it from the IPS 7.0(1) system architecture. Web Server now uses the SDEE event server.
This section describes SensorApp, and contains the following topics:
•Inline, Normalization, and Event Risk Rating Features
•SensorApp New Features
•Signature Event Action Processor
SensorApp performs packet capture and analysis. Policy violations are detected through signatures in SensorApp and the information about the violations is forwarded to the Event Store in the form of an alert.
Packets flow through a pipeline of processors fed by a producer designed to collect packets from the network interfaces on the sensor.
SensorApp supports the following processors:
This processor processes events stored in a time-slice calendar. Its primary task is to make stale database entries expire and to calculate time-dependent statistics.
•Deny Filters Processor
This processor handles the deny attacker functions. It maintains a list of denied source IP addresses. Each entry in the list expires based on the global deny timer, which you can configure in the virtual sensor configuration.
•Signature Event Action Processor
This processor processes event actions. It supports the following event actions:
–Reset TCP flow
–Generate SNMP trap
–Capture trigger packet
Event actions can be associated with an event risk rating threshold that must be surpassed for the actions to take place.
This processor keeps track of system statistics such as packet counts and packet arrival rates.
•Layer 2 Processor
This processor processes layer 2-related events. It also identifies malformed packets and removes them from the processing path. You can configure actionable events for detecting malformed packets such as alert, capture packet, and deny packet. The Layer 2 Processor updates statistics about packets that have been denied because of the policy you have configured.
This processor maintains the signature state and flow databases.
•Fragment Reassembly Processor
This processor reassembles fragmented IP datagrams. It is also responsible for normalization of IP fragments when the sensor is in inline mode.
•Stream Reassembly Processor
This processor reorders TCP streams to ensure the arrival order of the packets at the various stream-based inspectors. It is also responsible for normalization of the TCP stream. The normalizer engine lets you enable or disable alert and deny actions.
The TCP Stream Reassembly Processor normalizer has a hold-down timer, which lets the stream state rebuild after a reconfiguration event. You cannot configure the timer. During the hold-down interval, the system synchronizes stream state on the first packet in a stream that passes through the system. When the hold down has expired, sensorApp enforces your configured policy. If this policy calls for a denial of streams that have not been opened with a 3-way handshake, established streams that were quiescent during the hold-down period will not be forwarded and will be allowed to timeout. Those streams that were synchronized during the hold-down period are allowed to continue.
•Signature Analysis Processor
This processor dispatches packets to the inspectors that are not stream-based and that are configured for interest in the packet in process.
•Slave Dispatch Processor
A process found only on dual CPU systems.
Some of the processors call inspectors to perform signature analysis. All inspectors can call the Alarm Channel to produce alerts as needed.
SensorApp also supports the following units:
The analysis engine handles sensor configuration. It maps the interfaces and also the signature and Alarm Channel policy to the configured interfaces.
The Alarm Channel processes all signature events generated by the inspectors. Its primary function is to generate alerts for each event it is passed.
Inline, Normalization, and Event Risk Rating Features
SensorApp contains the following inline, normalization, and event risk rating features:
•Processing packets inline
When the sensor is processing packets in the data path, all packets are forwarded without any modifications unless explicitly denied by policy configuration. Because of TCP normalization it is possible that some packets will be delayed to ensure proper coverage. When policy violations are encountered, SensorApp allows for the configuration of actions. Additional actions are available in inline mode, such as deny packet, deny flow, and deny attacker.
All packets that are unknown or of no interest to the IPS are forwarded to the paired interface with no analysis. All bridging and routing protocols are forwarded with no participation other than a possible deny due to policy violations. There is no IP stack associated with any interface used for inline (or promiscuous) data processing. The current support for 802.1q packets in promiscuous mode is extended to inline mode.
Intentional or unintentional fragmentation of IP datagrams can serve to hide exploits making them difficult or impossible to detect. Fragmentation can also be used to circumvent access control policies like those found on firewalls and routers. And different operating systems use different methods to queue and dispatch fragmented datagrams. If the sensor has to check for all possible ways that the end host will reassemble the datagrams, it makes the sensor vulnerable to denial of service attacks. Reassembling all fragmented datagrams inline and only forwarding completed datagrams, refragmenting the datagram if necessary, is the solution to this problem. The IP Fragmentation Normalization unit performs this function.
Through intentional or natural TCP session segmentation, some classes of attacks can be hidden. To make sure policy enforcement can occur with no false positives and false negatives, the state of the two TCP endpoints must be tracked and only the data that is actually processed by the real host endpoints should be passed on. Overlaps in a TCP stream can occur, but are extremely rare except for TCP segment retransmits. Overwrites in the TCP session should not occur. If overwrites do occur, someone is intentionally trying to elude the security policy or the TCP stack implementation is broken. Maintaining full information about the state of both endpoints is not possible unless the sensor acts as a TCP proxy. Instead of the sensor acting as a TCP proxy, the segments will be ordered properly and the normalizer will look for any abnormal packets associated with evasion and attacks.
•Event risk rating
The event risk rating incorporates the following additional information beyond the detection of a potentially malicious action:
–Severity of the attack if it were to succeed
–Fidelity of the signature
–Relevance of the potential attack with respect to the target host
–Overall value of the target host
Event risk rating helps reduce false positives from the system and gives you more control over what causes an alert.
SensorApp New Features
SensorApp contains the following new features:
•Policy table—Provides a list of risk category settings (high, medium, and low).
•Evasion protection—Lets an inline interface mode sensor switch from strict mode to asymmetric mode for the Normalizer.
•Sensor health meter—Provides sensor-wide health statistics.
•Top services—Provides the top ten instances of the TCP, UDP, ICMP, and IP protocols.
•Security meter—Profiles alerts into threat categories and reports this information in red, yellow, and green buckets. You can configure the transition points for these buckets.
•Clear Flow state—Lets you clear the database, which causes the sensor to start fresh just as in a restart.
•Restart status—Reports periodically the current start and restart stages of the sensor.
Packets are received by the NIC and placed in the kernel user-mapped memory space by the IPS-shared driver. The packet is prepended by the IPS header. Each packet also has a field that indicates whether to pass or deny the packet when it reaches Signature Event Action Processor.
The producer pulls packets from the shared-kernel user-mapped packet buffer and calls the process function that implements the processor appropriate to the sensor model. The following orders occur:
•Single processor execution
Time Processor --> Layer 2 Processor --> Deny Filters Processor --> Fragment Reassembly Processor --> Statistics Processor --> Database Processor --> Signature Analysis Processor --> Stream Reassembly Processor --> Signature Event Action Processor
•Dual processor execution
Execution Thread 1 Time Processor --> Layer 2 Processor --> Deny Filters Processor --> Fragment Reassembly Processor --> Statistics Processor --> Database Processor --> Signature Analysis Processor --> Slave Dispatch Processor --> | Execution Thread 2 Database Processor --> Stream Reassembly Processor --> Signature Event Action Processor
Signature Event Action Processor
The Signature Event Action Processor coordinates the data flow from the signature event in the Alarm Channel to processing through the Signature Event Action Override, the Signature Event Action Filter, and the Signature Event Action Handler. It consists of the following components:
The unit that represents the area to communicate signature events from the SensorApp inspection path to signature event handling.
•Signature Event Action Override
Adds actions based on the risk rating value. Signature Event Action Override applies to all signatures that fall in the range of the configured risk rating threshold. Each Signature Event Action Override is independent and has a separate configuration value for each action type.
•Signature Event Action Filter
Subtracts actions based on the signature ID, addresses, and risk rating of the signature event. The input to the Signature Event Action Filter is the signature event with actions possibly added by the Signature Event Action Override.
Note The Signature Event Action Filter can only subtract actions, it cannot add new actions.
The following parameters apply to the Signature Event Action Filter:
–Risk rating threshold range
–Actions to subtract
–Sequence identifier (optional)
–Enable action filter line bit
–Victim OS relevance or OS relevance
•Signature Event Action Handler
Performs the requested actions. The output from the Signature Event Action Handler is the actions being performed and possibly an evIdsAlert written to the Event Store.
Figure A-4 illustrates the logical flow of the signature event through the Signature Event Action Processor and the operations performed on the action for this event. It starts with the signature event with configured action received in the Alarm Channel and flows top to bottom as the signature event passes through the functional components of the Signature Event Action Processor.
Figure A-4 Signature Event Through Signature Event Action Processor
This section describes CollaborationApp, and contains the following sections:
CollaborationApp is a peer of MainApp and SensorApp. It interfaces with them using various interprocess communication technologies, such as IDAPI control transactions, semaphores, shared memory, and file exchange.
Reputation updates are exchanged between the global correlation server and CollaborationApp. CollaborationApp communicates with the sensors using four update components:
•Set of rules score weight values
•Set of IP addresses and address ranges, which together with the rules and alerts provide the information needed to calculate reputation scores
•List of IP addresses and address ranges for which traffic should always be denied
•Network participation configuration, which allows the server to control the rate at which sensors send telemetry date to the server
The sensor sends collaboration information to the Network Participation server. The sensor queries the global correlation server for a list of what collaboration updates are available and from which global correlation server to download the update files.
Note SensorApp starts before CollaborationApp, but they initialize asynchronously. Therefore, it is possible that the reputation update server may download and attempt to apply one or more global correlation updates before SensorApp is ready to accept the update. The update server may download and partially process the update, but it must wait until SensorApp is ready before it can commit the update.
For More Information
For detailed information on global correlation and how to configure it, see Chapter 11 "Configuring Global Correlation."
The global correlation update client exchanges manifests with the global correlation update server. It parses the server manifest to determine what new updates are available for download and where they reside, and then builds a list of updates to be installed. If all updates are applied successfully, then the global correlation update client commits the applied updates for each component, notifies SensorApp that new updates are available, and updates the client manifest to reflect the latest committed updates for each component.
The client manifest contains the UDI of the sensor, which includes the serial number of the sensor, and an encrypted shared secret that the server uses to verify the sensor is an authentic Cisco IPS sensor. The server manifest contains a list of update files available for each component. For each update file in the list, the server manifest contains data, such as the update version, type, order, location, file transfer protocol, and so forth.
There are two types of updates files: a full update file that replaces any existing data in the database of the component, and an incremental update that modifies the existing reputation data by adding, deleting, or replacing information. When all update files have been applied for all components, the temporary databases are committed by replacing the working databases.
Authentication and authorization are achieved though the secret encryption mechanism and decryption key management. The global correlation update server authenticates the sensor using the shared secret encryption mechanism contained in the client manifest. The global correlation update client authorizes sensors using decryption key management. Sensors that have been authenticated by the global correlation update server are sent valid keys in the server manifest so that they can decrypt the update files.
You receive a warning message if you have enabled global correlation, but you have not configured a DNS or HTTP proxy server. This warning is a reminder to either disable global correlation or add a DNS or HTTP proxy server.
For More Information
For the procedure for adding a DNS or HTTP proxy server to support global correlation, see Configuring Network Settings.
Whenever a global correlation update fails, an evError event is generated. The error message is included in sensor statistics. The following conditions result in a status message with the severity of Error:
•The sensor is unlicensed
•No DNS or HTTP proxy server is configured
•The manifest exchange failed
•An update file download failed
•Applying or committing the update failed
An evError event is generated with the severity level of Warning if you edit and save either the host or global correlation configurations so that global correlation is enabled, but no DNS or HTTP proxy servers are configured.
For More Information
For the procedure for displaying sensor statistics, see Displaying Statistics.
The CLI provides the sensor user interface for all direct node access such as Telnet, SSH, and serial interface. You configure the sensor applications with the CLI. Direct access to the underlying OS is allowed through the service role. This section describes the Cisco IPS CLI, and contains the following topics:
There are four user roles:
•Viewer—Can view configuration and events, but cannot modify any configuration data except their user passwords.
•Operator—Can view everything and can modify the following options:
–Signature tuning (priority, disable or enable)
–Virtual sensor definition
–Their user passwords
•Administrator—Can view everything and can modify all options that Operators can modify in addition to the following:
–Sensor addressing configuration
–List of hosts allowed to connect as configuration or viewing agents
–Assignment of physical sensing interfaces
–Enable or disable control of physical interfaces
–Add and delete users and passwords
–Generate new SSH host keys and server certificates
•Service—Only one user with service privileges can exist on a sensor. The service user cannot log in to the IDM. The service user logs in to a bash shell rather than the CLI.
Note The service role is a special role that allows you to bypass the CLI if needed. Only one service account is allowed. You should only create an account with the service role for troubleshooting purposes. Only a user with administrator privileges can edit the service account.
When you log in to the service account, you receive the following warning:
************************ WARNING *************************************************
UNAUTHORIZED ACCESS TO THIS NETWORK DEVICE IS PROHIBITED.
This account is intended to be used for support and troubleshooting purposes only.
Unauthorized modifications are not supported and will require this device to be
re-imaged to guarantee proper operation.
You should carefully consider whether you want to create a service account. The service account provides shell access to the system, which makes the system vulnerable. However, you can use the service account to create a password if the administrator password is lost. Analyze your situation to decide if you want a service account existing on the system.
Note For IPS 5.0 and later, you can no longer remove the cisco account. You can disable it using the no password cisco command, but you cannot remove it. To use the no password cisco command, there must be another administrator account on the sensor. Removing the cisco account through the service account is not supported. If you remove the cisco account through the service account, the sensor most likely will not boot up, so to recover the sensor you must reinstall the sensor system image.
The service account is a support and troubleshooting tool that enables TAC to log in to a native operating system shell rather than the CLI shell. It does not exist on the sensor by default. You must create it so that it is available for TAC to use for troubleshooting your sensor.
Only one service account is allowed per sensor and only one account is allowed a service role. When the password of the service account is set or reset, the password of the root account is set to the same password. This allows the service account user to su to root using the same password. When the service account is removed, the password of the root account is locked.
The service account is not intended to be used for configuration purposes. Only modifications made to the sensor through the service account under the direction of TAC are supported. Cisco Systems does not support the addition and/or running of an additional service to the operating system through the service account, because it affects proper performance and proper functioning of the other IPS services. TAC does not support a sensor on which additional services have been added.
You can track logins to the service account by checking the log file /var/log/.tac, which is updated with a record of service account logins.
Note Cisco IPS incorporates several troubleshooting features that are available through the CLI, IDM, or IME. The service account is not necessary for most troubleshooting situations. You may need to create the service account at the direction of TAC to troubleshoot a very unique problem. The service account lets you bypass the protections built into the CLI and allows root privilege access to the sensor, which is otherwise disabled. We recommend that you do not create a service account unless it is needed for a specific reason. You should remove the service account when it is no longer needed.
This section describes the communications protocols used by the Cisco IPS, and contains the following topics:
IPS applications use an interprocess communication API called IDAPI to handle internal communications. IDAPI reads and writes event data and provides a mechanism for control transactions. IDAPI is the interface through which all the applications communicate.
SensorApp captures and analyzes the network traffic on its interfaces. When a signature is matched, SensorApp generates an alert, which is stored in the Event Store. If the signature is configured to perform the blocking response action, SensorApp generates a block event, which is also stored in the Event Store.
Figure A-5 illustrates the IDAPI interface.
Figure A-5 IDAPI
Each application registers to the IDAPI to send and receive events and control transactions. IDAPI provides the following services:
–Initiates the control transaction.
–Waits for the inbound control transaction.
–Responds to the control transaction.
–Subscribes to remote IPS events, which are stored in the Event Store when received.
–Reads IPS events from the Event Store.
–Writes IPS events to the Event Store.
IDAPI provides the necessary synchronization mechanisms to guarantee atomic data accesses.
IDIOM is a data format standard that defines the event messages that are reported by the IPS as well as the operational messages that are used to configure and control intrusion detection systems. These messages consist of XML documents that conform to the IDIOM XML schema.
IDIOM supports two types of interactions: event and control transaction. Event interactions are used to exchange IPS events such as alerts. IDIOM uses two types of messages for event interactions: event and error messages. Control transactions provide a means for one host to initiate an action in, change the state of, or read the state of another host. Control transactions utilize four types of IDIOM messages: request, response, configuration, and error messages. Events and control transactions that are communicated between application instances within a host are known as local events or local control transactions, or collectively, local IDIOM messages. Events and control transactions that are communicated between different hosts are known as remote events and remote control transactions, or collectively, remote IDIOM messages.
Note IDIOM for the most part has been superseded by IDCONF, SDEE, and CIDEE.
Cisco IPS manages its configuration using XML documents. IDCONF specifies the XML schema including Cisco IPS control transactions. The IDCONF schema does not specify the contents of the configuration documents, but rather the framework and building blocks from which the configuration documents are developed. It provides mechanisms that let the IPS managers and CLI ignore features that are not configurable by certain platforms or functions through the use of the feature-supported attribute.
IDCONF messages are exchanged and wrapped inside IDIOM request and response messages.
The following is an IDCONF example:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<request xmlns="http://www.cisco.com/cids/idiom" schemaVersion="2.00">
<config typedefsVersion="2004-03-01" xmlns="http://www.cisco.com/cids/idconf">
<map name="user-accounts" editOp="merge">
IPS produces various types of events including intrusion alerts and status events. IPS communicates events to clients such as management applications using the proprietary CIDEE. We have also developed an IPS-industry leading protocol, SDEE, which is a product-independent standard for communicating security device events. SDEE is an enhancement that adds extensibility features that are needed for communicating events generated by various types of security devices.
Systems that use SDEE to communicate events to clients are referred to as SDEE providers. SDEE specifies that events can be transported using the HTTP or HTTP over SSL and TLS protocols. When HTTP or HTTPS is used, SDEE providers act as HTTP servers, while SDEE clients are the initiators of HTTP requests.
IPS includes Web Server, which processes HTTP or HTTPS requests. Web Server uses run-time loadable servlets to process the different types of HTTP requests. Each servlet handles HTTP requests that are directed to the URL associated with the servlet. The SDEE server is implemented as a web server servlet.
The SDEE server only processes authorized requests. A request is authorized if is originates from a web server to authenticate the identity of the client and determine the privilege level of the client.
CIDEE specifies the extensions to SDEE that are used by the Cisco IPS. The CIDEE standard specifies all possible extensions that are supported by Cisco IPS. Specific systems may implement a subset of CIDEE extensions. However, any extension that is designated as being required MUST be supported by all systems.
CIDEE specifies the Cisco IPS-specific security device events and the IPS extensions to the SDEE evIdsAlert element.
CIDEE supports the following events:
Generated by the CIDEE provider when the provider detects an error or warning condition. The evError event contains error code and textual description of the error.
•evStatus—Status message event
Generated by CIDEE providers to indicate that something of potential interest occurred on the host. Different types of status messages can be reported in the status event—one message per event. Each type of status message contains a set of data elements that are specific to the type of occurrence that the status message is describing. The information in many of the status messages are useful for audit purposes. Errors and warnings are not considered status information and are reported using evError rather than evStatus.
•evShunRqst—Block request event
Generated to indicate that a block action is to be initiated by the service that handles network blocking.
The following is a CDIEE extended event example:
<sd:evIdsAlert eventId="1042648730045587005" vendor="Cisco" severity="medium">
<sd:time offset="0" timeZone="UTC">1043238671706378000</sd:time>
<sd:signature description="IOS Udp Bomb" id="4600" cid:version="S37">
Cisco IPS 7.0 File Structure
Cisco IPS 7.0 has the following directory structure:
•/usr/cids/idsRoot—Main installation directory.
•/usr/cids/idsRoot/shared—Stores files used during system recovery.
•/usr/cids/idsRoot/var—Stores files created dynamically while the sensor is running.
•/usr/cids/idsRoot/var/updates—Stores files and logs for update installations.
•/usr/cids/idsRoot/var/virtualSensor—Stores files used by SensorApp to analyze regular expressions.
•/usr/cids/idsRoot/var/eventStore—Contains the Event Store application.
•/usr/cids/idsRoot/var/core—Stores core files that are created during system crashes.
•/usr/cids/idsRoot/var/iplogs—Stores iplog file data.
•/usr/cids/idsRoot/bin—Contains the binary executables.
•/usr/cids/idsRoot/bin/authentication—Contains the authentication application.
•/usr/cids/idsRoot/bin/cidDump—Contains the script that gathers data for tech support.
•/usr/cids/idsRoot/bin/cidwebserver—Contains the web server application.
•/usr/cids/idsRoot/bin/cidcli—Contains the CLI application.
•/usr/cids/idsRoot/bin/nac—Contains the ARC application.
•/usr/cids/idsRoot/bin/logApp—Contains the logger application.
•/usr/cids/idsRoot/bin/mainApp—Contains the main application.
•/usr/cids/idsRoot/bin/sensorApp—Contains the sensor application.
•/usr/cids/idsRoot/bin/collaborationApp—Contains the collaboration application.
•/usr/cids/idsRoot/bin/falcondump—Contains the application for getting packet dumps on the sensing ports of the IDSM2.
•/usr/cids/idsRoot/etc—Stores sensor configuration files.
•/usr/cids/idsRoot/htdocs—Contains the IDM files for the web server.
•/usr/cids/idsRoot/lib—Contains the library files for the sensor applications.
•/usr/cids/idsRoot/log—Contains the log files for debugging.
•/usr/cids/idsRoot/tmp—Stores the temporary files created during run time of the sensor.
Summary of Cisco IPS 7.0 Applications
Table A-2 gives a summary of the applications that make up the IPS.
Table A-2 Summary of Applications
Authorizes and authenticates users based on IP address, password, digital certificates, and RADIUS servers.
Attack Response Controller
An ARC is run on every sensor. Each ARC subscribes to network access events from its local Event Store. The ARC configuration contains a list of sensors and the network access devices that its local ARC controls. If a ARC is configured to send network access events to a master blocking sensor, it initiates a network access control transaction to the remote ARC that controls the device. These network access action control transactions are also used by IPS managers to issue occasional network access actions.
Accepts command line input and modifies the local configuration using IDAPI.
Shares information with other devices through a global correlation database to improve the combined efficacy of all the devices.
Control Transaction Server1
Accepts control transactions from a remote client, initiates a local control transaction, and returns the response to the remote client.
Control Transaction Source2
Waits for control transactions directed to remote applications, forwards the control transactions to the remote node, and returns the response to the initiator.
The Java applet that provides an HTML IPS management interface.
The Java applet that provides an interface for viewing and archiving events.
Handles bypass and physical settings and defines paired interfaces. Physical settings are speed, duplex, and administrative state.
Writes all the log messages of the application to the log file and the error messages of the application to the Event Store.
Reads the configuration and starts applications, handles starting and stopping of applications and node reboots, handles software upgrades.
Sends SNMP traps when triggered by alert, status, and error events. NotificationApp uses the public domain SNMP agent. SNMP GETs provide information about the general health of the sensor.
Accepts requests for events from remote clients.
Captures and analyzes traffic on the monitored network and generates intrusion and network access events. Responds to IP logging control transactions that turn logging on and off and that send and delete IP log files.
Waits for remote HTTP client requests and calls the appropriate servlet application.