This installation guide describes how to perform a clean installation of Cisco Cyber Vision on the following devices:

• Cisco Catalyst IE3300 10G Rugged Series switches

• Cisco Catalyst IE3400 Rugged Series switches

• Cisco Catalyst IE3400 Heavy Duty Series switches

Note	The manual refers to these devices as "IE3x00".

• Cisco Catalyst IE9300 Rugged Series Switch

Note	The manual refers to this device as "IE9x00".

• Cisco Catalyst 9300 Series Switch

• Cisco Catalyst 9300X Series Switch

• Cisco Catalyst 9400 Series Switch

Note	The manual refers to these devices as "Catalyst 9x00".

Moreover, this document describes how to upgrade sensors through different methods.

This documentation is applicable to Cisco Cyber Vision Center Sensor/Center, Release 5.3.x.

To ensure your personal safety and to prevent damage to property, observe the following: Warnings and notices and Safety Alert symbols. These notices are graded according to the degree of danger.

Warning

Indicates risks that involve industrial network safety or production failure that could possibly result in personal injury or severe property damage. Take precautions.

Important

Indicates risks that could involve property or Cisco equipment damage and minor personal injury. Take precautions.

Note	Indicates important information on the product described in the documentation.