The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This installation guide shows how to connect, configure and install Cisco Cyber Vision Center on a virtual machine running on VMware ESXi and Microsoft Hyper-VVMware ESXi, Microsoft Hyper-V, Nutanix, and RedHat OpenShift Container Platform.
You will also find the upgrade procedures for an architecture with a Global Center and for an architecture with one Center only.
This manual contains notices you have to observe to ensure your personal safety as well as to prevent damage to property.
The notices referring to your personal safety and to your property damage are highlighted in the manual by a safety alert symbol described below. These notices are graded according to the degree of danger.
 Warning |
Indicates risks that involve industrial network safety or production failure that could possibly result in personal injury or severe property damage if proper precautions are not taken. |
 Important |
Indicates risks that could involve property or equipment damage and minor personal injury if proper precautions are not taken. |
Note |
Indicates important information on the product described in the documentation to which attention should be paid. |
Feedback