Cisco x90 Series Content Security Appliances Installation and Maintenance Guide

偏向のない言語

この製品のドキュメントセットは、偏向のない言語を使用するように配慮されています。このドキュメントセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージの取り組みの詳細は、こちらをご覧ください。

翻訳について

このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。

マニュアルのコンテンツ

このマニュアル内で検索

検索結果

Updated:: 2019年2月18日月曜日

Appliance Specifications

This appendix includes the following sections and lists the technical specifications for the x90 Series Cisco Email Security Appliances (ESAs), Cisco Content Security Management Appliances (SMAs), and Cisco Web Security Appliances (WSAs):

Physical Specifications

Table A-1 lists the physical specifications for the following Cisco Content Security Appliances:

C190 Email Security Appliances
M190 Content Security Management Appliances
S190 Web Security Appliances
C390 Email Security Appliances
M390 Content Security Management Appliances
S390 Web Security Appliances

Table A-1 Physical Specifications for Cisco Content Security Appliances with a 1 RU chassis
Description	Specification
Height	1.7 in. (4.3 cm)
Width	16.9 in. (42.9 cm)
Depth	29.8 in. (75.8 cm)
Maximum weight (fully loaded chassis)	SFF 2-drive: 32.2 lb. (16.6 Kg) SFF 4-drive: 34.1 lb. (16.8 Kg) SFF 6-drive: 36.0 lb. (17.0 Kg) SFF 8-drive: 37.9 lb. (17.2 Kg)

Table A-2 lists the physical specifications for the following Cisco Content Security Appliances:

C690 Email Security Appliances
M690 Content Security Management Appliances
S690 Web Security Appliances

Table A-2 Physical Specifications for Cisco Content Security Appliances with a 2 RU chassis
Description	Specification
Height	3.4 in. (8.7 cm)
Width	19.0 in. (48.26 cm)
Depth Depth, including slam latches and power supply handles	29.0 in. (73.7 cm) 31.5 in. (80.0 cm)
Maximum weight (fully loaded chassis)	SFF 4-drive: 49.9 lb. (23.6 Kg) SFF 8-drive: 52.9 lb. (24.0 Kg) SFF 10-drive: 55.9 lb. (24.2 Kg) SFF 16-drive: 58.9 lb. (24.8 Kg)

Environmental Specifications

Table A-3 lists the environmental specifications for x90 series Cisco Content Security Appliances with both 1 RU and 2 RU chassis.

Table A-3 Environmental Specifications
Description	Specification
Temperature, operating	41 to 95°F (5 to 35°C) Derate the maximum temperature by 1°C per every 305 meters of altitude above sea level.
Temperature, nonoperating (when the appliance is stored or transported)	-40 to 149°F (-40 to 65°C)
Humidity (RH), noncondensing	10 to 90%
Altitude, operating	0 to 10,000 feet
Altitude, nonoperating (when the appliance is stored or transported)	0 to 40,000 feet
Sound power level for x90 series Cisco Content Security Appliances with a 1 RU chassis. Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C)	5.4
Sound power level for x90 series Cisco Content Security Appliances with a 2 RU chassis. Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C)	5.8
Sound pressure level for x90 series Cisco Content Security Appliances with a 1 RU chassis. Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C)	37
Sound pressure level for x90 series Cisco Content Security Appliances with a 2 RU chassis. Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C)	43

Power Specifications

The power specifications for the power supply options are listed in the following sections:

Note Do not mix power supply types in the appliance. Both power supplies must be identical.

770 W AC Power Supply

Table A-4 lists the specifications for each 770 W AC power supply (Cisco part number CCS-PWR-AC-770W) used in the x90 series Cisco Content Security Appliances with a 1 RU chassis.

Table A-4 770 W AC Power Supply Specifications
Description	Specification
AC input voltage range	90 to 264 V AC (self-ranging, 100 to 264 V AC nominal)
AC input frequency	Range: 47 to 63 Hz (single phase, 50 to 60 Hz nominal)
AC line input current (steady state)	9.5 A peak at 100 V AC 4.5 A peak at 208 V AC
Maximum output power for each power supply	770 W
Power supply output voltage	Main power: 12 V DC Standby power: 12 V DC

650 W AC Power Supply

Table A-5 lists the specifications for each 650 W AC power supply (Cisco part number CCS-PWR-ACV2-650W) used in the x90 series Cisco Content Security Appliances with a 2 RU chassis.

Table A-5 650 W AC Power Supply Specifications
Description	Specification
AC input voltage range	90 to 264 V AC (self-ranging, 180 to 264 V AC nominal)
AC input frequency	Range: 47 to 63 Hz (single phase, 50 to 60 Hz nominal)
AC line input current (steady state)	7.6 A peak at 100 V AC 3.65 A peak at 208 V AC
Maximum output power for each power supply	650 W
Power supply output voltage	Main power: 12 V DC Standby power: 12 V DC

930W DC Power Supply

Table A-6 lists the specifications for each 930 W DC power supply (Cisco part number UCSC-PSU-930WDC).

Table A-6 930 W DC Power Supply Specifications
Description	Specification
Class	RSP1
Input
DC input voltage range	–48 to -60 VDC nominal (self-ranging, –40 to –72 VDC)
DC line input current (steady state)	23 A peak at –48 VDC
Output
12 V main power output	930 W
12 V standby power output	30 W
Power supply output voltage	Main power: 12 VDC Standby power: 12 VDC

このドキュメントは役に立ちましたか?

フィードバック

シスコに問い合わせ

サポートケースをオープン
(シスコサービス契約が必要です。)